Sony DCR-TRV16 / DCR-TRV16E / DCR-TRV18 / DCR-TRV18E (serv.man2) Service Manual ▷ View online
5-3
DCR-TRV16/TRV16E/TRV18/TRV18E/TRV116E/TRV118E
LB-077 board
(COMPLETE)
PD-161 board
(COMPLETE)
V
A-117 boar
d
(COMPLETE)
VC-280 board
(COMPLETE)
VC-280 board
IC2502 (EEPR
OM)
VC-280 board
IC2901 (EEPR
OM)
Supporting
Board
EEPROM
replacement
replacement
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
Adjustment
Section
Initialization of
8, A, B,C, D,
E, F, 1B, 1F
page data
Camera
Color EVF
LCD
System control
Servo, RF
Video
Mechanism
Adjustment
Initialization of A, D page data
Initialization of B, 1B page data
Initialization of 8, C page data
Initialization of E, F, 1F page data
36MHz origin oscillation adj.
HALL adj.
Flange back adj.
Optical axis adj.
Color reproduction adj.
MAX GAIN adj.
AWB & LV standard data input
Auto white balance adj.
Mechanical shutter adj.
VCO adj.
RGB AMP adj.
Contrast adj.
White balance adj.
VCO adj.
RGB AMP adj.
Contrast adj.
COM AMP adj.
V COM adj.
White balance adj.
Serial No. input
CAP FG duty adj.
Switching position adj.
AGC center level adj.
APC & AEQ adj.
PLL fo & LPF fo adj.
Chroma BPF fo adj.
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
Tape path adj.
Table. 5-1-1 (2).
• Adjusting items when replacing a board or EEPROM
When replacing a board or EEPROM, adjust the items indicated by
z
in the following table.
Note2:
There are two types of angular velocity
sensor.
sensor.
Type A: CG-L43A0
Type B: CG-L43A1
Type B: CG-L43A1
Replace the broken sensor with a same
type sensor. If replace with other type
parts, the image will vibrate up and down
or left and right during hand-shake
correction operations.
type sensor. If replace with other type
parts, the image will vibrate up and down
or left and right during hand-shake
correction operations.
5-4
DCR-TRV16/TRV16E/TRV18/TRV18E/TRV116E/TRV118E
Ref. No.
J-1
J-2
J-3
J-4
J-5
J-6
J-7
J-8
J-9
J-10
J-11
Name
Filter for color temperature correction (C14)
ND filter 1.0
ND filter 0.4
ND filter 0.1
Pattern box PTB-450
Color chart for pattern box
Adjustment remote commander
(RM-95 upgraded) (Note)
(RM-95 upgraded) (Note)
Siemens star chart
Clear chart for pattern box
CPC-8 jig
Extension cable (100P, 0.5mm)
Mini pattern box
Camera table
Parts Code
J-6080-058-A
J-6080-808-A
J-6080-806-A
J-6080-807-A
J-6082-200-A
J-6020-250-A
J-6082-053-B
J-6080-875-A
J-6080-621-A
J-6082-388-A
J-6082-352-A
J-6082-353-B
J-6082-384-A
Usage
Auto white balance adjustment/checkWhite balance
adjustment/check
adjustment/check
White balance check
White balance check
White balance check
For checking the flange back
For adjusting the video section
For adjusting the color viewfinder
For adjusting the LCD block
For adjusting the color viewfinder
For adjusting the LCD block
For extension between the VA-117 board (CN4002) and
the VC-280 board (CN1007)
the VC-280 board (CN1007)
For adjusting the flange back
For adjusting the flange back
5-1. CAMERA SECTION ADJUSTMENT
1-1.
PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)
1-1-1.
List of Service Tools
• Oscilloscope
• Color monitor
• Vectorscope
• Regulated power supply
• Digital voltmeter
Note:
If the micro processor IC in the adjustment remote commander is
not the new micro processor (UPD7503G-C56-12), the pages cannot
be switched. In this case, replace with the new micro processor (8-
759-148-35).
not the new micro processor (UPD7503G-C56-12), the pages cannot
be switched. In this case, replace with the new micro processor (8-
759-148-35).
Fig. 5-1-1.
J-1
J-2
J-6
J-3
J-7
J-8
J-4
J-5
J-9
J-10
J-11
5-5
DCR-TRV16/TRV16E/TRV18/TRV18E/TRV116E/TRV118E
1-1-2.
Preparations
Note1:
For details of how remove the cabinet and boards, refer to “2.
DISASSEMBLY”.
DISASSEMBLY”.
Note2:
When performing only the adjustments, the lens block and boards
need not be disassembled.
need not be disassembled.
Note3:
Before performing the adjustments, check the data of page: 0,
address: 10 is “00”. If not, set data: 00 to this address.
address: 10 is “00”. If not, set data: 00 to this address.
1)
Connect the equipment for adjustments according to Fig. 5-1-3.
Note4:
As removing the cabinet (R) assembly (removing CN1005 of the
VC-280 board) means removing the lithium 3V power supply
(BT5201 on the CK-108 board), data such as date, time, user-set
menus will be lost. After completing adjustments, reset these data.
But the self-diagnosis data and the data on history of use (total
drum rotation time etc.) will be kept even if the lithium 3V power
supply is removed. (Refer to “5-4.Service Mode” for the self-
diagnosis data and the data on history of use.)
VC-280 board) means removing the lithium 3V power supply
(BT5201 on the CK-108 board), data such as date, time, user-set
menus will be lost. After completing adjustments, reset these data.
But the self-diagnosis data and the data on history of use (total
drum rotation time etc.) will be kept even if the lithium 3V power
supply is removed. (Refer to “5-4.Service Mode” for the self-
diagnosis data and the data on history of use.)
Note5:
Setting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the PAUSE
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the PAUSE
button.
The above procedure will enable the camera power to be turned
on with the control switch block (PS-CX2670) removed. After
completing adjustments, be sure to exit the “Forced Camera Power
ON Mode”.
on with the control switch block (PS-CX2670) removed. After
completing adjustments, be sure to exit the “Forced Camera Power
ON Mode”.
Note6:
Exiting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the PAUSE
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the PAUSE
button.
3) Select page: 0, address: 01, and set data: 00.
Fig. 5-1-2.
1.5 m
Front of the lens
Pattern box
5-6
DCR-TRV16/TRV16E/TRV18/TRV18E/TRV116E/TRV118E
Fig. 5-1-3.
Color monitor
Vector scope
Terminated at 75
Ω
VIDEO
(Yellow)
(Yellow)
AUDIO L
(White)
(White)
AUDIO R
(Red)
(Red)
AC power adaptor
AC-L10,
AC-VQ800 etc.
AC-VQ800 etc.
LANC jack
Lens block
Front panel
block
block
VC-280
board
board
VA-117 board
AUDIO/VIDEO jack
Adjustment remote
commander
commander
EVF block
CPC-8 jig
(J-6082-388-A)
Need not be connected.
CN1009
CN1010
CN1401
CN1006
CN1201
CN1901 CN1008
CN1005
CN1007
CN4002
CN1002
CN1001
CN1011
CN4601
CN4004
CN4003
CN4001
CN5202
CN5201
CN5207
CN5203
CN5205
CN4201
Need not be connected.
CN5902
MA-406 board
Must be connected
when performing the
LCD system adjustments.
when performing the
LCD system adjustments.
Must be
connected.
connected.
DC IN jack
Must be connected when performing
the EVF system adjustments.
the EVF system adjustments.
Must be connected
when performing
the video or EVF
or LCD system
adjustments.
when performing
the video or EVF
or LCD system
adjustments.
CK-108 board
Cabinet (R)
Battery terminal
Extension cable (100P)
(J-6082-352-A)
(J-6082-352-A)
Click on the first or last page to see other DCR-TRV16 / DCR-TRV16E / DCR-TRV18 / DCR-TRV18E (serv.man2) service manuals if exist.