Sony DCR-TRV12E / DCR-TRV14E / DCR-TRV19 / DCR-TRV19E (serv.man3) Service Manual ▷ View online
69
Advanced Recording Operations
You can make a recording with a stop-motion animated effect using frame recording.
To create this effect, alternately move the subject a little and make frame recording. We
recommend that you use a tripod, and operate your camcorder using the Remote
Commander to avoid camera-shake.
To create this effect, alternately move the subject a little and make frame recording. We
recommend that you use a tripod, and operate your camcorder using the Remote
Commander to avoid camera-shake.
The POWER switch should be set to
.
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU to display the menu.
(3) Select FRAME REC in
(2) Press MENU to display the menu.
(3) Select FRAME REC in
, then press EXEC (p. 182).
(4) Select ON, then press EXEC.
(5) Press EXIT to return to FN.
(5) Press EXIT to return to FN.
The FRAME REC indicator lights up.
(6) Press START/STOP to start frame recording. Your camcorder makes a
recording for about 6 frames, and returns to recording standby.
(7) Move the subject, and repeat step 6.
To cancel frame recording
Set FRAME REC to OFF in the menu settings.
Note
The proper remaining tape time is not indicated if you use frame recording
continuously.
The proper remaining tape time is not indicated if you use frame recording
continuously.
When using frame recording
The last recorded frame is longer than other frames.
The last recorded frame is longer than other frames.
Frame by frame recording
– Frame recording
– Frame recording
TAPE SET
REC MODE
AUDIO MODE
REMAIN
FRAME REC
INT. REC
AUDIO MODE
REMAIN
FRAME REC
INT. REC
EXIT
RET.
EXEC
OFF
ON
ON
70
You can operate camera brightness and fader on the touch panel when looking at the
viewfinder. Turn the LCD panel over and move it back to your camcorder body with
the LCD screen facing out to do this operation.
viewfinder. Turn the LCD panel over and move it back to your camcorder body with
the LCD screen facing out to do this operation.
The POWER switch should be set to
or
(DCR-TRV22/
TRV33 only).
Operate by touching the panel.
Operate by touching the panel.
(1) Turn the LCD panel over and move it back to your camcorder body with the
LCD screen facing out, then extend the viewfinder.
(2) Press
OFF. The PANEL OFF indicator appears on the screen.
(3) Press OK. The LCD screen is turned off.
(4) Using the viewfinder, press the LCD screen. EXPOSURE,
(4) Using the viewfinder, press the LCD screen. EXPOSURE,
OK,
ON and
FADER (only when the POWER switch is set to CAMERA) appear.
(5) Press the LCD screen and select a desired item, then press
OK.
EXPOSURE: Adjust the exposure by pressing –/+.
FADER:
FADER:
Press FADER until a desired fader mode appears.
The indicator changes as follows:
The indicator changes as follows:
FADER
t
M. FADER
t BOUNCE t MONOTONE
(no indicator)
T DOT*
T WIPE* T OVERLAP*
* DCR-TRV22/TRV33 only
ON:
The LCD screen lights up.
To make the buttons on the LCD screen disappear
Press
OK.
Using the viewfinder
4
EXPO–
SURE
OK
ON
FADER
ON
EXPO–
SURE
OK
When the POWER switch is set
to CAMERA
to CAMERA
When the POWER switch is set to
MEMORY (DCR-TRV22/TRV33
only)
MEMORY (DCR-TRV22/TRV33
only)
Viewfinder
71
Advanced Recording Operations
Using the viewfinder
Note
When the POWER switch is set to VCR or during memory playback (DCR-TRV22/
TRV33 only), you cannot operate with the touch panel using the viewfinder.
When the POWER switch is set to VCR or during memory playback (DCR-TRV22/
TRV33 only), you cannot operate with the touch panel using the viewfinder.
To operate the items that do not appear
Set the LCD panel and the viewfinder back to the previous position. Operate the items
using the LCD screen.
Set the LCD panel and the viewfinder back to the previous position. Operate the items
using the LCD screen.
Available recording time
This is the time when you record pictures using the viewfinder (p. 19).
This is the time when you record pictures using the viewfinder (p. 19).
72
The POWER switch should be set to
.
Operate by touching the panel.
(1) During playback or playback pause, press FN to display PAGE1.
(2) Press MENU to display the menu.
(3) Select P EFFECT in
(2) Press MENU to display the menu.
(3) Select P EFFECT in
, then press EXEC (p. 176).
(4) Select a desired mode, then press EXEC.
You can use NEG. ART, SEPIA, B&W and SOLARIZE.
See page 58 for details of each mode.
See page 58 for details of each mode.
To return to FN
Press EXIT.
To cancel picture effect
Set P EFFECT to OFF in the menu settings.
Notes
•You cannot process externally input scenes using picture effect.
•You cannot record images on the tape on your camcorder while you are processing
•You cannot process externally input scenes using picture effect.
•You cannot record images on the tape on your camcorder while you are processing
the image using picture effect. Record images on the “Memory Stick” (DCR-TRV22/
TRV33 only, p. 118, 128), or on a VCR using your camcorder as a player.
TRV33 only, p. 118, 128), or on a VCR using your camcorder as a player.
Pictures processed by picture effect
These pictures are not output through the DV Interface.
These pictures are not output through the DV Interface.
— Advanced Playback Operations —
Playing back tape with picture effect
MANUAL SET
P EFFECT
EXIT
RET.
EXEC
OFF
NEG. ART
SEPIA
B&W
SOLARIZE
NEG. ART
SEPIA
B&W
SOLARIZE
Click on the first or last page to see other DCR-TRV12E / DCR-TRV14E / DCR-TRV19 / DCR-TRV19E (serv.man3) service manuals if exist.