Sony DCR-TRV10 / DCR-TRV10E / DCR-TRV8 / DCR-TRV8E (serv.man6) Service Manual ▷ View online
SERVICE MANUAL
SUPPLEMENT-3
File this supplement-3 with the Service Manual.
(00-001)
DCR-TRV8/TRV8E/TRV10/TRV10E
RMT-808/809/811/812
US Model
Canadian Model
Korea Model
DCR-TRV8/TRV10
AEP Model
UK Model
Australian Model
Chinese Model
DCR-TRV8E/TRV10E
E Model
Hong Kong Model
DCR-TRV8/TRV8E/TRV10/TRV10E
Tourist Model
DCR-TRV10/TRV10E
Sony Corporation
Personal VIDEO Products Company
2000D1631-1
Printed in Japan © 2000.4
Published by Safety & Service Engineering Dept.
9-974-161-84
Addition of “Note”
Page
Changed contents
: Added portion.
:
Changed portion.
5-40
2. Battery End Check (VC-217 board)
Check the battery end voltage.
Mode
Camera recording
Subject
Arbitrary
Note:
It is normal though the following symptoms appear during the battery
end check.
1) The message of “FOR InfoLITHIUM BATTERY ONLY” is
end check.
1) The message of “FOR InfoLITHIUM BATTERY ONLY” is
indicated on the LCD or viewfinder screen.
2) The tally lamp is flashing.
Switch setting
Adjusting method:
1)
1)
Adjust the output voltage of the regulated power supply so that
the digital voltmeter display is 6.0 ± 0.1Vdc.
the digital voltmeter display is 6.0 ± 0.1Vdc.
2)
Turn off the power supply.
3)
Turn on the HOLD switch of the adjustment remote
commander.
commander.
4)
Turn on the power supply.
5)
Load a cassette, and set to the camera recording mode.
6)
Decrease the output voltage of the regulated power supply so
that the digital voltmeter display is 5.50 ± 0.01Vdc.
that the digital voltmeter display is 5.50 ± 0.01Vdc.
7)
Record the camera signal for a minute.
8)
Playback the recorded section and check that the playback
picture and sound are normal.
picture and sound are normal.
2000. 04
Display
