Sony DCR-SX30E / DCR-SX31E / DCR-SX40 / DCR-SX40E / DCR-SX41 / DCR-SX41E / DCR-SX50E / DCR-SX60 / DCR-SX60E (serv.man2) Service Manual ▷ View online
HELP
DCR-SX30E/SX31E/SX40/SX40E/SX41/SX41E/SX50E/SX60/SX60E_L2
HELP
Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
Optical Filter
Block
Block
HELP01:
Speaker Retainer/Harness (HN-024)/
Harness Retainer Sheet
Harness Retainer Sheet
Harness Retainer Sheet
HELP03:
How to Distinguish The Side of Optical Filter Block Facing to Lens Device
HELP02:
Shield Sheet/VC Radiation Sheet
VC Radiation Sheet
Shield Sheet
Claw
Speaker
Retainer
Retainer
Harness (HN-024)
Rib
VC-560 Board
The one side of the Optical Filter Block has treated with IR cut coating.
Mount the Optical Filter Block facing the IR cut coated side to the lens device.
Distinguish the IR cut coated side from the other by applying the fluorescent light to the Optical Filter Block in
the dark place (cut off the outside light).
Mount the Optical Filter Block facing the IR cut coated side to the lens device.
Distinguish the IR cut coated side from the other by applying the fluorescent light to the Optical Filter Block in
the dark place (cut off the outside light).
Hold it with tweezers or the like.
[IR Cut Coated Side]
[The Other Side]
Lens Device side
Lens Device side
•
IR cut coating surface
The red coating is reflected.
The red coating is reflected.
•
The other surface
The red coating is
not reflected.
The red coating is
not reflected.
•
Side view
The red belt is
seen.
The red belt is
seen.
HELP
DCR-SX30E/SX31E/SX40/SX40E/SX41/SX41E/SX50E/SX60/SX60E_L2
1
Fold dotted line parts of the FP-1106 flexible board
as shown in figure.
as shown in figure.
2
Pass the FP-1106 flexible board through
the FPC clamp.
the FPC clamp.
3
Install the FPC clamp in the hinge assy.
FPC clamp
Adhesive tape
Adhesive tape
Stick it together in the adhesive tape
while bending the FP-1106 flexible board.
while bending the FP-1106 flexible board.
HELP04:
The Method of Attatchment of FP-1106 Flexible Board
Hinge assy
FPC clamp
HELP
DCR-SX30E/SX31E/SX40/SX40E/SX41/SX41E/SX50E/SX60/SX60E_L2
Adhesive sheet
5
Put the FP-1106 flexible board on the
hinge assy by the adhesive sheet
according to the position of the boss.
hinge assy by the adhesive sheet
according to the position of the boss.
4
Roll the FP-1106 flexible board 2.5 times,
in the direction of arrow
in the direction of arrow
A
.
Boss
A
2.5 times
DCR-SX30E/SX31E/SX40/SX40E/SX41/SX41E/SX50E/SX60/SX60E_L2
Link
Link
3. BLOCK DIAGRAMS
OVERALL BLOCK DIAGRAM (3/3)
OVERALL BLOCK DIAGRAM (2/3)
OVERALL BLOCK DIAGRAM (1/3)
POWER BLOCK DIAGRAM (3/3)
POWER BLOCK DIAGRAM (2/3)
POWER BLOCK DIAGRAM (1/3)
Click on the first or last page to see other DCR-SX30E / DCR-SX31E / DCR-SX40 / DCR-SX40E / DCR-SX41 / DCR-SX41E / DCR-SX50E / DCR-SX60 / DCR-SX60E (serv.man2) service manuals if exist.