DOWNLOAD Sony DCR-SC100 / DCR-SC100E Service Manual ↓ Size: 4.09 MB | Pages: 121 in PDF or view online for FREE

Flange back adjustment chart

(2.0 m from the front of the lens)

(Luminance: 200 ± 50 lux)

Check operations on TV monitor

F

24 to 29, 38 to 3C

20) Press the PAUSE button of the adjusting remote commander.
21) Set data: 03 to page: 6, address: 01, and press the PAUSE button

of the adjusting remote commander.

22) Read the DDS display data, and this data is named W

0

. If W

0

lies within the “8C” to “90” range, perform “Processing after
completing adjustments”. If it lies outside the range, perform
the following adjustments.

23) Convert W

0

 to decimal notation, and obtain W

0

´.

24) Calculate X

2

´ using the following equations (decimal notation

calculation).
C´ = W

0

´ – B´ – 24 ................................................... Equation 4

X

2

´= ............... Equation 

5

(X

1

´ and B´ are values obtained from equations 2) and 3)

25) Convert X

2

´ to hexadecimal notation and obtain X

2

.

(Round off to one decimal place)

26) Set data X

2

 to page: F, address: 1E, and press the PAUSE button

of the adjusting remote commander.

27) Change the data of page: F, address: 1F, and adjust the DDS

display data to “8E”.

28) Press the PAUSE button of the adjusting remote commander.
29) Set data: 01 to page: 6, address: 01, and press the PAUSE button

of the adjusting remote commander.

30) Check that the DDS display data lies within the “16” to “1A”

range.

Processing after Completing Adjustments
1) Set data: 00 to page: D, address: 11, and press the PAUSE button

of the adjusting remote commander.

2) Set data: 00 to page: 0, address: 01.
3) Set data: 00 to page: 6, address: 01, and press the PAUSE button

of the adjusting remote commander.

4) Set data: 00 to page: 6, address: 04.
5) Set data: 00 to page: 6, address: 00.

4) Check that the data of page: 6, address: 02 is 00.
5) Set data: 13 to page: 6, address: 01, and press the PAUSE button

of the adjusting remote commander.

6) Set data: 15 to page: 6, address: 01, and press the PAUSE button

of the adjusting remote commander.
(The adjustment data will be automatically input to page: F,
address: 24 to 29, 38 to 3C.)

7) Check that the data of page: 6, address: 02 is “01”.

Processing after Completing Adjustments
1) Turn OFF the main power supply (8.4V)

Adjusting method:
1) Check that at both the zoom lens TELE terminal and WIDE

terminal, the center of the chart for the flange back adjustment
and center of the exposure screen coincide.

2) Set data: 01 to page: 6, address: 00.
3) Check that the data of page: F, address: 24 to 29, 38 to 3C is the

initial value (see table below).

5. Flange Back Adjustment
The inner focus lens flange back adjustment is carried out
automatically.

(118 – B´) x (X

1

´ – 48) + 48 x C´

C´

Subject

Measurement Point

Measuring Instrument

Adjustment Page

Adjustment Address

CD

19

92

21

12

14

24

25

26

27

28

29

41

00

19

00

2E

38

39

3A

3B

3C

Siemens star

2.0m from the front of the lens

Luminance: approx. 200 lux

Check the operation on the TV monitor

Focused at the TELE end and WIDE end.

Subject

Measurement Point

Measuring Instrument

Specified Value

Color bar chart standard picture frame

(1.5m from the front of the lens)

Video output terminal of AUDIO VIDEO

OUT jack

Oscilloscope and TV monitor.

A = B, C = D, t = 0 ± 0.1 msec

Subject

Measurement Point

Measuring Instrument

Specified Value

Check on the oscilloscope

1. horizontal period

A = B

A

B

C = D

C

D

2. Vertical period

V

t = 0 ± 0.1 msec

Check on the TV monitor

Color bar chart picture frame

TV monitor picture frame

Setting method:
1) Adjust the zoom and the camera direction, and set to the specified

position.

2) Mark the position of the picture frame on the monitor display,

and adjust the picture frame to this position in following
adjustments using “color bar chart standard picture frame”.

n

Switch setting:
1) STEADY SHOT (Menu display) ....................................... OFF
2) DIGITAL ZOOM (Menu display) ...................................... OFF

Checking method:
1) Place the Siemens star 2.0m from the front of the lens.
2) To open the IRIS, decrease the luminous intensity to the Siemens

star up to a point before noise appears on the image.

3) Shoot the siemens star with the zoom TELE end.
4) Turn on the auto focus.
5) Check that the lens is focused (Note 1), and turn off the auto

focus

6) Set data: 10 to page: 6, address: 21.
7) Shoot the siemens star with the zoom WIDE end.
8) Observe the TV monitor and check that the lens is focused.

Note 1: When the auto focus is ON, the lens can be checked if it is

focused or not by observing the data on page A of the
adjusting remote commander.
1) Set data: 0F to page: 6, address: 04.
2) Page A shows the state of the focus.

A : 00 : XX

01: Focused
00: Unfocused

Processing after Completing Adjustments
1) Set data: 00 to page: 6, address: 21.
2) Set data: 00 to page: 6, address: 04.

8. G-CAM flip Discrimination Adjustment
Sets the color reproduction conditions to optimum.

Note 1: Displayed data of page A of the adjusting remote

commander

A : XX : XX

S2
S1

Adjusting method
1) Set data: 01 to page: 6, address: 00.
2) Set data: 01 to page: 6, address: 01, and press the PAUSE button

of the adjusting remote commander.

3) Set data: 16 to page: 6, address: 04.
4) Set data: 59 (NTSC) or data: 70 (PAL) to page: F, address: 53,

and press the PAUSE button of the adjusting remote commander.

5) Select page A of the adjusting remote commander, and compare

the higher 2 digits (S1) and lower 2 digits (S2) of the 4-digit
display data.
[When S1<S2]

Perform steps 6) onwards.

[When S1

<

=

S2]

Perform steps 7) onwards.

6) Set data: D9 (NTSC) or data: F0 (PAL) to page: F, address: 53,

and press the PAUSE button of the adjusting remote commander.

7) Set data: 00 to page: 6, address: 01, and press the PAUSE button

of the adjusting remote commander.

8) Set data: 00 to page: 6, address: 04.
9) Set data: 00 to page: 6, address: 00.

Color bar chart standard picture frame

Display data of page A of the adjusting

remote commander (Note 1)

F

53

Subject

Measuring point

Measuring instrument

Adjusting page

Adjusting address

n
n

Color bar chart standard picture frame

Video output terminal of AUDIO /

VIDEO OUT jack

Vectorscope

F

2E, 30, 8F, 90

All color luminance points should settle

within each color reproduction frame.

9. Color Reproduction Adjustment
Adjust the color separation matrix coefficient so that the proper color
reproduction is produced.

Subject

Measurement Point

Measuring Instrument

Adjustment Page

Adjustment Address

Specified Value

Note: NTSC model: DCR-SC100

PAL model: DCR-SC100E

Adjusting method:
1) Set data: 01 to page: 6, address: 00.
2) Set data: 3D to page: 6, address: 01, and press the PAUSE button

of the adjusting remote commander.

3) Set data: 3F to page: F, address: 16, and press the PAUSE button

of the adjusting remote commander.

4) Adjust the GAIN and PHASE of the vectorscope, and adjust the

burst luminance point to the burst position of the color
reproduction frame.

5) Change the data of addresses 2E, 30, 8F and 90 of page: F, and

settle each color luminance point in each color reproduction
frame.

Note 1: Be sure to press the PAUSE button of the adjusting

remote commander before changing the addresses.
If not, the new data will not be written to the memory.

6) Press the PAUSE button of the adjusting remote commander.

Processing after Completing Adjustments
1) Set data: 00 to page: 6, address: 01 and press the PAUSE button

of the adjusting remote commander.

2) Set data: 00 to page: 6, address: 00.

For NTSC model

For PAL model

(

Burst position

Burst position

(