Sony DCR-PC8E (serv.man2) Service Manual ▷ View online
2-5
DCR-PC8E
2-6. CABINET (G) ASSEMBLY
1
Screw
(M1.7
×
2.5)
4
Two screws
(M1.7
×
2.5)
1
Open the
jack cover (S).
2
Cabinet (G) assembly
3
Eject knob
2
Special head (step)
screw (M2.6)
3
Sleeve (front)
4
Hold grip assembly
5
Sleeve (rear)
3
Four tapping
screws (M1.7
×
4)
2
MS connector retainer
1
Two tapping
screws (M1.7
×
4)
2-6
DCR-PC8E
2-7. CONTROL SWITCH BLOCK (FK-1770)
2-8. CONTROL SWITCH BLOCK (PS-1770), NS-013 BOARD
1
Two screws
(M1.7
×
2.5)
1
Two screws
(M1.7
×
2.5)
2
Screw
(M1.7
×
2.5)
3
2
Three tapping
screws
(M1.7
(M1.7
×
4)
3
Two tapping
screws
(M1.7
(M1.7
×
4)
5
Tapping
screw
(M1.7
(M1.7
×
4)
4
Shoe frame
6
Cabinet (L)
7
Control switch block
(FK-1770)
3
Three screws
(M1.7
×
2.5)
7
Four screws
(M1.7
×
2.5)
q;
Screw
(M1.7
×
2.5)
qa
NS-013 board
9
Front cover
8
NS window assembly
5
Screw
(M1.7
×
2.5)
1
Battery lock
2
Compression spring
4
Cabinet (rear)
6
Control switch block
(PS-1770)
2-7
DCR-PC8E
2-9. BJ-002A BOARD
1
Four screws
(M1.7
×
4), lock ace, p2
2
Screw
(M1.7
×
4),
lock ace, p2
6
Screw
(M1.7
×
2.5)
1
Screw
(M1.7
×
2.5)
2
Tripod screw
3
Bottom frame
4
Two Tape (A)
5
Tape (A)
4
Tapping screw
(M1.7
×
4)
9
Two tapping
screws (M1.7
×
4)
5
Terminal retainer
plate assembly
3
Tape (A)
6
Flexible protection sheet
7
Battery terminal
board
8
DC-IN
connector
q;
BJ-002A board
8
PD-113
harness (16P)
7
PR-063
harness (8P)
CN3100 (for the DC-IN connector) and CN3105 (for the battery terminal board) of BJ-002A
board are the same size, and the number of the pins is the same.
So these connectors may be mistaken for each other. When these connectors are mistaken,
the charge system of the unit may break.
So ascertain the color of the connector when assembling these connectors.
board are the same size, and the number of the pins is the same.
So these connectors may be mistaken for each other. When these connectors are mistaken,
the charge system of the unit may break.
So ascertain the color of the connector when assembling these connectors.
Note :
BJ-002A board
Battery terminal board
CN3100 (for the DC-IN connector) ················· Blue
CN3105 (for the battery terminal board) ········ White
CN3105 (for the battery terminal board) ········ White
DC-IN connector
CN3100 (Blue)
CN3105 (White)
(Note)
(Note)
(Note)
2-8
DCR-PC8E
VC-265D
Adjustment remote
commander (RM-95)
commander (RM-95)
CPC-6 flexible jig
(J-6082-370-B)
(J-6082-370-B)
CPC-6 terminal board jig
(J-6082-371-A)
(J-6082-371-A)
When exiting the “Forced VTR Power ON” mode, connect the control
switch block (PS-1770) to the control switch block (FK-1770). Or,
when ejecting the cassette, connect the control switch block (PS-1770)
to the control switch block (FK-1770) and press the EJECT switch.
switch block (PS-1770) to the control switch block (FK-1770). Or,
when ejecting the cassette, connect the control switch block (PS-1770)
to the control switch block (FK-1770) and press the EJECT switch.
Control switch block
(PS-1770) (8P)
(PS-1770) (8P)
Control switch block (FK-1770)
(A-7096-840-A) (51P)
(Note)
(A-7096-840-A) (51P)
(Note)
Eject switch
VC-265D board
Mechanism deck
AC IN
AC power
adaptor
adaptor
DC-IN connector
[SERVICE POSITION TO CHECK THE VTR SECTION]
Connection to Check the VTR Section
To check the VTR section, set the VTR to the “Forced VTR power ON” mode. (Or, connect the control switch block (PS-1770)
to the control switch block (FK-1770) and set the power switch to the “VIDEO” position.)
Operate the VTR function using the adjustment remote commander (with the HOLD switch set in the OFF position).
to the control switch block (FK-1770) and set the power switch to the “VIDEO” position.)
Operate the VTR function using the adjustment remote commander (with the HOLD switch set in the OFF position).
Note : The control switch block (FK-1770) is used for the repair parts as a jig.
Setting the “Forced VTR Power ON” mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 02 and
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 02 and
press the PAUSE button of the adjustment remote
commander.
commander.
Exiting the “Forced VTR Power ON” mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, data: 00, and press the PAUSE
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, data: 00, and press the PAUSE
button of the adjustment remote commander.
3) Select page: 0, address: 01, and set data: 00.
BJ-002A
board
board
Click on the first or last page to see other DCR-PC8E (serv.man2) service manuals if exist.