Sony DCR-PC110E Service Manual ▷ View online
— 9 —
1. MAIN PARTS
Note:
• Follow the disassembly procedure in the numerical order given.
• Items marked “*” are not stocked since they are seldom required for routine service.
• Items marked “*” are not stocked since they are seldom required for routine service.
Some delay should be anticipated when ordering these items.
• The parts numbers of such as a cabinet are also appeared in this section.
Refer to the parts number mentioned below the name of parts to order.
1.
ORNAMENTAL PARTS
The components identified by mark
0
or
dotted line with mark
0
are critical for safety.
Replace only with part number specified.
DCR-PC110E
Lens cap assembly
X-3949-944-1
X-3949-944-1
Battery cover
3-057-482-01
3-057-482-01
CPC lid
3-063-500-01
3-063-500-01
Screw (M1.7
×
2.5),
lock ace, k3
3-057-437-01
3-057-437-01
Jack cover (G)
3-063-468-01
3-063-468-01
Remote commander (RMT-811)
1-475-950-21
1-475-950-21
Battery case lid
3-053-056-01
3-053-056-01
Jack cover (S)
3-063-436-01
3-063-436-01
— 10 —
2.
DISASSEMBLY
The following flow chart shows the disassembly procedure.
DCR-PC110E
2-2. Cabinet (L) block assembly
2-4. VTR overall section, Cabinet (R) block assembly
2-1. PD-134 board, Inverter transformer unit
2-6. FJ-027 board
2-8. AI-021, VC-253 boards, Mechanism deck
2-9. Control switch block (PS30550),
Control switch block (FK30550)
Control switch block (FK30550)
2-10. LCD hinge assembly
2-3. EVF block assembly
2-5. Flash unit (MC), ST cabinet (lower)
2-7. CD-285 board, Lens section
— 11 —
2-1.
PD-134 BOARD, INVERTER TRANSFORMER UNIT
NOTE: Follow the disassembly procedure in the numerical order given.
PD
-13
4
A
A
B
B
PD
-13
4
2
Two claws
8
1
Harness
(PT-107) (16P)
3
LCD cabinet (R)
assembly
6
LCD cabinet (L)
assembly
5
Two screws
(M1.7
×
2.5),
lock ace, p2
4
Two screws
(M1.7
×
2.5),
lock ace, p2
3
Screw
(M1.7
×
2.5),
lock ace, p2
1
Two screws
(M1.7
×
2.5),
lock ace, p2
7
Liquid crystal
indicator module
4
Two claws
6
PD-134 board,
Inverter transformer unit
2
Liquid crystal
indicator module (24P)
5
Back light
(Cold cathode fluorescent tube),
BL shield sheet (N)
BL shield sheet (N)
2-2.
CABINET (L) BLOCK ASSEMBLY
4
Control switch block
(FK30550) (51P)
5
Cabinet (L) block assembly
Lock plate
A
B
9
Jack ornamental
plate assembly
3
Cabinet (upper)
1
Screw
(M1.7
×
4),
lock ace, p2
2
Two claws
8
Claw
1
Two screws
(M1.7
×
2.5),
lock ace, p2
2
Two screws
(M1.7
×
2.5),
lock ace, p2
3
Two screws
(M1.7
×
2.5),
lock ace, p2
7
Three screws
(M1.7
×
2.5),
lock ace, p2
5
Push the lock plate in the
direction of the arrow
B
to open the flash unit.
Routing of the flexible board of the Operation
switch block (FK30550) when attaching the
Cabinet (L) block.
switch block (FK30550) when attaching the
Cabinet (L) block.
4
Move the microphone block
in the direction of the arrow
A
.
6
Microphone unit
(5P)
6
Open the flash unit
— 12 —
2-4.
VTR OVERALL SECTION, CABINET (R) BLOCK ASSEMBLY
7
Cabinet (R) block assembly
5
FP-255 flexible board
(27P)
1
Screw
(M1.7
×
2.5),
lock ace, p2
3
Screw
(M1.7
×
2.5),
lock ace, p2
4
FJ-027 board (70P)
2
Two screws
(M1.7
×
2.5),
lock ace, p2
6
VTR overall section
2-3.
EVF BLOCK ASSEMBLY
1
Screw
(M1.7
×
2.5),
lock ace, p2
4
EVF block assembly
7
Lens holder assembly
6
LCD cushion (B)
5
Light guide plate block,
BL cushion (B),
BL holder
3
VF spacer
2
VF cover
5
4
VF-147 board
3
FP-252 flexible board
(10P)
2
FP-253 flexible board
(33P)
3
Two claws
2
Two precision screws
(dia, 1.7
×
4)
1
Precision screw
(dia, 1.7
×
4)
4
EVF cup assembly
1
Two tapping screws
(M1.7
×
5)
Click on the first or last page to see other DCR-PC110E service manuals if exist.