Sony DCR-PC109 / DCR-PC109E (serv.man4) Service Manual ▷ View online
6-2
DCR-PC109/PC109E
Replaced parts
Block replacement
Parts replacement
z
z
z
z
z
z z
z
z
z z
z
z z
z
z z
z
z z
z
z
z
z
z
z
z
z
z
z
z
z z
z
z z
z
z
z z
z
z
z
z
z z
z
z z
z z
z
z
z
z
Lens de
vice
Mechanism deck (Note)
LCD block LCD901 (LCD panel)
LCD block (backlight LED)
EVF block LCD902 (LCD panel)
Mechanism deck M901 (Drum assy) (Note)
Mechanism MD block
CD-494 board
IC201 (CCD imager)
CD-494 board
IC202 (S/H)
LB-096 board
D303 (backlight (EVF))
PD-213 board
IC602 (RGB dri
v
er
,
T
iming generator (LCD))
SE-140 board
SE401/402 (PITCH /Y
A
W
sensor)
VC-352 board
IC5001, X5001 (T
iming generator)
VC-352 board
IC5003 (,A/D con
v.
)
VC-352 board
IC6201 (Camera D
V
signal process, etc.)
VC-352 board
IC6401 (D
V signal process,RF signal pr
ocess)
VC-352 board
IC6501 (REC/PB
AMP)
VC-352 board
IC7101 (V
ideo IN/OUT)
VC-352 board
IC9301 (RGB dri
v
er
,
T
iming generator (EVF))
Adjustment
Section
Initialization of 8,
A, B, C, D, E, F, 14,
18, 19, 1A, 1B, 1C,
1E, 1F page data
Camera
Color EVF
LCD
Mechanism
System control
Servo, RF
Video
Adjustment
Loading of flash memory program
Initialization of A, B, D, 1A, 1B page data
Initialization of 8, C, 18, 1C page data
Initialization of E, F, 14, 19, 1E, 1F page data
54MHz/66MHz origin oscillation check
HALL adj.
MR adj.
Flange back adj.
MAX GAIN adj.
Mechanical shutter adj.
Color reproduction adj.
AWB standard data input
LV standard data input
Auto white balance adj.
Steady shot check
EVF automatic adj.
White balance adj.
LCD automatic adj.
V COM adj.
Transmissive mode white balance adj.
Reflective mode white balance adj.
Tape path adj.
Touch panel adj.
Serial No. input
CAP FG duty adj.
Switching position adj.
Error rate check
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
1-1. Adjusting items when replacing main parts and boards.
• Adjusting items when replacing main parts
When replacing main parts, adjust the items indicated by z in the following table.
Note: When replacing the drum assy. or the mechanism deck, reset the data of page: 7, address: A7 to A9 to “00”. (Refer to “Record of Use check” of
Note: When replacing the drum assy. or the mechanism deck, reset the data of page: 7, address: A7 to A9 to “00”. (Refer to “Record of Use check” of
“6-4. SERVICE MODE”)
Table. 6-1-1(1).
6-3
DCR-PC109/PC109E
CD-494 board (COMPLEA
T)
LB-096 board (COMPLEA
T)
PD-213 board (COMPLEA
T)
SE-140 board (COMPLEA
T)
VC-352 board (COMPLEA
T)
VC-352 board
IC8802 (EEPR
OM)
VC-352 board
IC8402 (EEPR
OM)
VC-352 board
IC8503 (Flash memory)
Supporting
Board
EEPROM
replacement
replacement
z
z
z z
z z
z z
z
z z
z
z z
z
z
z z
z
z
z z
z
z z
z
z
z z
z
z z
z
z
z z
z
z
z z
z
z z z
z
z z
z
z
z z
z
z z
z
z
z z
z
z z
z
z z
z
z
z z
z z
z z
z
z z
z
z z
z
z z
z z
Table. 6-1-1(2).
• Adjusting items when replacing a board or EEPROM
When replacing a board or EEPROM, adjust the items indicated by z in the following table.
When replacing a board or EEPROM, adjust the items indicated by z in the following table.
Adjustment
Section
Initialization of 8,
A, B, C, D, E, F, 14,
18, 19, 1A, 1B, 1C,
1E, 1F page data
Camera
Color EVF
LCD
Mechanism
System control
Servo, RF
Video
Adjustment
Loading of flash memory program
Initialization of A, B, D, 1A, 1B page data
Initialization of 8, C, 18, 1C page data
Initialization of E, F, 14, 19, 1E, 1F page data
54MHz/66MHz origin oscillation check
HALL adj.
MR adj.
Flange back adj.
MAX GAIN adj.
Mechanical shutter adj.
Color reproduction adj.
AWB standard data input
LV standard data input
Auto white balance adj.
Steady shot check
EVF automatic adj.
White balance adj.
LCD automatic adj.
V COM adj.
Transmissive mode white balance adj.
Reflective mode white balance adj.
Tape path adj.
Touch panel adj.
Serial No. input
CAP FG duty adj.
Switching position adj.
Error rate check
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
6-4
DCR-PC109/PC109E
6-1. CAMERA SECTION ADJUSTMENT
1-1.
PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)
1-1-1.
List of Service Tools
• Oscilloscope
• Color monitor
• Vectorscope
J-1
J-2
J-3
J-4
Filter for color
temperature correction
(C14)
J-6080-058-A
temperature correction
(C14)
J-6080-058-A
ND filter 1.0
J-6080-808-A
J-6080-808-A
ND filter 0.4
J-6080-806-A
J-6080-806-A
ND filter 0.1
J-6080-807-A
J-6080-807-A
Pattern box PTB-450
J-6082-200-A
J-6082-200-A
Color chart for
pattern box
J-6020-250-A
pattern box
J-6020-250-A
J-5
J-6
J-7
J-8
Siemens star chart
J-6080-875-A
J-6080-875-A
Clear chart for
pattern box
J-6080-621-A
pattern box
J-6080-621-A
Mini pattern box
J-6082-353-B
J-6082-353-B
Adjustment remote
commander
(RM-95 upgraded)
J-6082-053-B
commander
(RM-95 upgraded)
J-6082-053-B
J-9
J-10
A: CPC-15
J-6082-564-A
J-6082-564-A
B: I/F unit for
LANC control
J-6082-521-A
LANC control
J-6082-521-A
Camera table
J-6082-384-A
J-6082-384-A
A
B
Fig. 6-1-1.
J-11
Handycam station
(DCRA-C111)
1-818-213-21
(EXCEPT J MODEL)
(DCRA-C110)
1-818-213-11
(J MODEL)
(DCRA-C111)
1-818-213-21
(EXCEPT J MODEL)
(DCRA-C110)
1-818-213-11
(J MODEL)
Ver 1.1 2004. 07
6-5
DCR-PC109/PC109E
1-1-2.
Preparations
Note1: For details of how remove the cabinet and boards, refer to “2.
DISASSEMBLY”.
Note2: When performing only the adjustments, the lens block and boards
need not be disassembled.
Note3: Before performing the adjustments, check the data of page: 0,
address: 10 is “00”. If not, set data: 00 to this address.
1)
Connect the equipment for adjustments according to Fig. 6-1-3.
Note4: As removing the MS-201 board (removing CN1205 of the VC-
352 board) means removing the lithium 3V power supply (BT501
on the MS-201 board), data such as date, time, user-set menus
will be lost. After completing adjustments, reset these data.
But the self-diagnosis data and the data on history of use (total
drum rotation time etc.) will be kept even if the lithium 3V power
supply is removed. (Refer to “6-4.Service Mode” for the self-
diagnosis data and the data on history of use.)
on the MS-201 board), data such as date, time, user-set menus
will be lost. After completing adjustments, reset these data.
But the self-diagnosis data and the data on history of use (total
drum rotation time etc.) will be kept even if the lithium 3V power
supply is removed. (Refer to “6-4.Service Mode” for the self-
diagnosis data and the data on history of use.)
Note5: Setting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 10, set data: 01, and press the PAUSE
2) Select page: A, address: 10, set data: 01, and press the PAUSE
button.
The above procedure will enable the camera power to be turned
on with the control switch block (SS6800) removed. After
completing adjustments, be sure to exit the “Forced Camera Power
ON Mode”. (Operate the camera functions using the touch panel.
When the control switch block (SS6800) is removed, the function
buttons of the adjustment remote commander are not effective even
if the HOLD switch of the adjustment remote commander is set to
the OFF position.)
on with the control switch block (SS6800) removed. After
completing adjustments, be sure to exit the “Forced Camera Power
ON Mode”. (Operate the camera functions using the touch panel.
When the control switch block (SS6800) is removed, the function
buttons of the adjustment remote commander are not effective even
if the HOLD switch of the adjustment remote commander is set to
the OFF position.)
Note6: Exiting the “Forced Camera Power ON” Mode
1)
Select page: 0, address: 01, and set data: 01.
2)
Select page: A, address: 10, set data: 00, and press the PAUSE
button.
button.
3)
Select page: 0, address: 01, and set data: 00.
Fig. 6-1-2.
Front of the lens
Pattern box
1.0 m
Click on the first or last page to see other DCR-PC109 / DCR-PC109E (serv.man4) service manuals if exist.