DOWNLOAD Sony DCR-IP45 / DCR-IP45E / DCR-IP55 / DCR-IP55E (serv.man2) Service Manual ↓ Size: 5.35 MB | Pages: 127 in PDF or view online for FREE

— 5 —

1-1-2. Preparations ····································································· 5-5
1-1-3. Precaution ········································································ 5-7
1.

Setting the Switch ···························································· 5-7

2.

Order of Adjustments ······················································ 5-7

3.

Subjects ··········································································· 5-7

1-2.

INITIALIZATION OF 4, 8, 9, A, B, C, D, E, F, 1B, 1E, 1F
PAGE DATA ···································································· 5-8

1-2-1. INITIALIZATION OF A, D PAGE DATA ······················ 5-8
1.

Initializing the A, D Page Data ········································ 5-8

2.

Modification of A, D Page Data ······································ 5-8

3.

A Page Table ···································································· 5-8

4.

D Page Table ···································································· 5-8

1-2-2. INITIALIZATION OF B, 1B PAGE DATA ···················· 5-9
1.

Initializing the B, 1B Page Data ······································ 5-9

2.

Modification of B, 1B Page Data ···································· 5-9

3.

Initialization of Bluetooth Unit (DCR-IP55/IP55E) ······· 5-9

4.

Writing the Network Default Setting Value
(DCR-IP55/IP55E) ·························································· 5-9

5.

B Page Table ·································································· 5-10

6.

1B Page Table ································································ 5-10

1-2-3. INITIALIZATION OF E, F, 1E, 1F PAGE DATA ········ 5-11
1.

Initializing the E, F, 1E, 1F Page Data ·························· 5-11

2.

Modification of E, F, 1E, 1F Page Data ························· 5-11

3.

E Page Table ·································································· 5-12

4.

F Page Table ·································································· 5-12

5.

1E Page Table ································································ 5-14

6.

1F Page Table ································································ 5-14

1-2-4. INITIALIZATION OF 4, 8, 9, C PAGE DATA ············· 5-15
1.

Initializing the 4, 8, 9, C Page Data ······························· 5-15

2.

Modification of 4, 8, 9, C Page Data ····························· 5-15

3.

4 Page Table ··································································· 5-15

4.

8 Page Table ··································································· 5-16

5.

9 Page Table ··································································· 5-16

6.

C Page Table ·································································· 5-16

1-3.

CAMERA SYSTEM ADJUSTMENTS ························ 5-18

1.

54MHz/66MHz Origin Oscillation Adjustment
(VC-291 board) ····························································· 5-18

2.

HALL Adjustment ························································· 5-19

3.

MR Adjustment ····························································· 5-20

4.

Flange Back Adjustment (Using Minipattern Box) ······· 5-21

5.

Flange Back Adjustment (Using Flange Back Adjustment
Chart and Subject More Than 500m Away) ·················· 5-22

5-1.

Flange Back Adjustment (1) ·········································· 5-22

5-2.

Flange Back Adjustment (2) ·········································· 5-22

6.

Flange Back Check ························································ 5-23

7.

MAX GAIN Adjustment ··············································· 5-23

8.

Picture Frame Setting ···················································· 5-24

9.

Color Reproduction Adjustment ···································· 5-25

10.

Auto White Balance & LV Standard Data Input ··········· 5-26

11.

Auto White Balance Adjustment ··································· 5-27

12.

White Balance Check ···················································· 5-28

13.

Black Defective CCD Adjustment ································· 5-29

14.

Mechanical Shutter Adjustment ···································· 5-29

15.

Strobe Light Level Adjustment ····································· 5-30

16.

Strobe White Balance Adjustment & Check ················· 5-30

17.

AF Laser Output Adjustment ········································ 5-31

18.

AF Laser Axis Check ···················································· 5-32

19.

Steady Shot Check ························································· 5-33

1-4.

COLOR ELECTRONIC VIEWFINDER
SYSTEM ADJUSTMENT ············································ 5-34

1.

Back Light Adjustment (DI-085 board) ························ 5-35

1-1.

Automatic Adjustment ··················································· 5-35

1-2.

Manual Adjustment ······················································· 5-35

2.

Bright Adjustment (DI-085 board) ································ 5-36

2-1.

Automatic Adjustment ··················································· 5-36

2-2.

Manual Adjustment ······················································· 5-36

3.

Contrast Adjustment (DI-085 board) ····························· 5-37

3-1.

Automatic Adjustment ··················································· 5-37

3-2.

Manual Adjustment ······················································· 5-37

4.

White Balance Adjustment (DI-085 Board) ·················· 5-38

5.

VCO Check (DI-085 Board) ········································· 5-38

1-5.

LCD SYSTEM ADJUSTMENT ··································· 5-40

1.

VCO Adjustment (PD-166 Board) ································ 5-40

2.

Bright Adjustment (PD-166 Board) ······························ 5-41

3.

Black Limit Adjustment (PD-166 Board) ····················· 5-41

4.

PSIG GRAY Adjustment (PD-166 Board) ···················· 5-42

5.

Contrast Adjustment (PD-166 Board) ··························· 5-42

6.

Center Level Adjustment (PD-166 Board) ···················· 5-43

7.

V-COM Adjustment (PD-166 Board) ···························· 5-43

8.

White Balance Adjustment (PD-166 Board) ················· 5-44

5-2.

MECHANISM SECTION ADJUSTMENT ·················· 5-45

2-1.

Adjustment Remote Commander ·································· 5-45

2-2.

OPERATING WITHOUT CASSETTE ························ 5-45

2-3.

TAPE PATH ADJUSTMENT ········································ 5-45

1.

Preparation for Adjustment ··········································· 5-45

2.

Processing after Completing Operations: ······················ 5-45

5-3.

VIDEO SECTION ADJUSTMENT ······························ 5-46

3-1.

PREPARATIONS BEFORE ADJUSTMENTS ············ 5-46

3-1-1. Equipment to Required ·················································· 5-46
3-1-2. Precautions on Adjusting ··············································· 5-47
3-1-3. Adjusting Connectors ···················································· 5-48
3-1-4. Connecting the Equipment ············································ 5-48
3-1-5. Alignment Tapes ···························································· 5-49
3-1-6. Input/Output Level and Impedance ······························· 5-49
3-2.

SYSTEM CONTROL SYSTEM ADJUSTMENT ········ 5-50

1.

Initialization of 4, 8, 9, A, B, C, D, E, F, 1B, 1E, 1F
Page Data ······································································· 5-50

2.

Touch Panel Adjustment ················································ 5-50

3.

Serial No. Input ····························································· 5-50

3-3.

SERVO AND RF SYSTEM ADJUSTMENT ··············· 5-52

1.

Cap FG Duty Adjustment (VC-291 Board) ··················· 5-52

2.

Treel FG Duty Adjustment (VC-291 Board) ················· 5-53

3.

Read Clock fo Adjustment (VC-291 Board) ················· 5-53

4.

Switching Position Adjustment (VC-291 Board) ·········· 5-54

5.

XREC ACT Adjustment (VC-291 Board) ····················· 5-54

6.

Timing ATF Center Value Adjustment (VC-291 Board) ·· 5-55

7.

AGC Adjustment and AEQ & LMS Adjustment ··········· 5-55

7-1.

Preparations Before Adjustments ·································· 5-55

7-2.

AGC Adjustment (VC-291 Board) ································ 5-56

7-3.

Pch AEQ & LMS Adjustment (VC-291 Board) ············ 5-56

7-4.

Mch AEQ & LMS Adjustment (VC-291 Board) ··········· 5-57

8.

Error Rate Check (VC-291 Board) ································ 5-57

3-4.

VIDEO SYSTEM ADJUSTMENTS ····························· 5-58

1.

Chroma BPF fo Adjustment (DI-085 Board) ················ 5-58

2.

S VIDEO OUT Y Level Adjustment (VC-291 Board) ···· 5-58

3.

S VIDEO OUT Chroma Level Adjustment
(VC-291 Board) ····························································· 5-59

4.

VIDEO OUT Y, Chroma Level Check (VC-291 Board) ·· 5-59

3-5.

AUDIO SYSTEM ADJUSTMENTS ···························· 5-60

1.

Overall Level Characteristics Check ····························· 5-61

2.

Overall Distortion Check ··············································· 5-61

3.

Overall Noise Level Check ············································ 5-61

5-4.

SERVICE MODE ·························································· 5-62

4-1.

ADJUSTMENT REMOTE COMMANDER ················ 5-62

1.

Using the adjustment remote commander ····················· 5-62

2.

Precautions upon using the adjustment remote
commander ···································································· 5-62

4-2.

DATA PROCESS ··························································· 5-63

4-3.

SERVICE MODE ·························································· 5-64

1.

Setting the Test Mode ···················································· 5-64

2.

Emergence Memory Address ········································ 5-64

2-1.

EMG Code (Emergency Code) ····································· 5-64

2-2.

MSW Code ···································································· 5-65

3.

Bit value discrimination ················································ 5-66

— 6 —

4.

Switch check (1) ···························································· 5-66

5.

Switch check (2) ···························································· 5-66

6.

Switch check (3) ···························································· 5-67

7.

Record of Use check (1) ················································ 5-67

8.

Record of Use check (2) ················································ 5-68

9.

Record of Self-diagnosis check ····································· 5-68

6-1-1. OVERALL SECTION ····················································· 6-1
6-1-2. CABINET (L) SECTION-1 ············································ 6-2
6-1-3. CABINET (L) SECTION-2 ············································ 6-3
6-1-4. EVF SECTION ································································ 6-4
6-1-5. STROBOSCOPE LENS SECTION ································ 6-5
6-1-6. CABINET (R) SECTION-1 ············································ 6-6
6-1-7. CABINET (R) SECTION-2 (LCD UNIT) ······················ 6-7
6-1-8. CASSETE COMPARTMENT ASSEMBLY, DRUM

BLOCK ASSEMBLY ······················································ 6-8

6-1-9. LS CHASSIS BLOCK ASSEMBLY ······························· 6-9
6-1-10. MECHANISM CHASSIS BLOCK ASSEMBLY ······ 6-10
6-2.

ELECTRICAL PARTS LIST ········································ 6-11

Parts list of the DI-085 board and VC-291 board are
not shown.
Pages from 6-15 to 6-26 are not shown.

* Color reproduction frame is shown on page 185.

1-1

In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4V), the power is shut off so
that the unit cannot operate.
These following two methods are available to prevent this. Take note of which to use during repairs.

Method 1:
Use the AC power adaptor (AC-L20, AC-VF50).

Method 2:
Connect the servicing remote commander RM-95 (J-6082-053-B) to the LANC jack, and set the commander switch to the “ADJ” side.

1

Refer to 2-3 to remove the cabinet (rear) assembly.

2

Refer to 2-4 to remove the tripod (screw assembly).

3

Refer to 2-5 to remove the cabinet (R) assembly.

4

Refer to 2-7 to remove the FU-161 board, DI-085 board, EVF block.

5

Refer to 2-9 to remove the VC electric heat sheet.

6

Open the cassette lid.

7

Supply +4.5V from the regulated power supply between pins 3, 4 and pins 1, 2 of the flexible board which disconnected from
CN452, and unload the cassette. (Be careful not to short-circuit.)

VC-291

board

Pin 

3

, 

4

Enlargement

Regulated power supply 
(+4.5Vdc)

CN452

Pin 

1

, 

2

1-2

The capacitor (C4207) of the flash unit (FL-2960) is charged up to the maximum 300V potential. There is a danger of electric shock by this
high voltage when the flash unit (FL-2960) is handled by hand. The electric shock is caused by the charged voltage which is kept without
discharging when the main power of the unit is simply turned off. Therefore, the remaining voltage must be discharged as described below.

To preparing the short jig. a small clip is attached to each end of a resistor of 1k

Ω/1W (1-215-869-11). Wrap insulating tape fully around the

reads of the resistor to prevent electric shock.

1

Remove the power supply (Battery or AC power adaptor).

2

Short-circuit between TP4201 of the flash unit (FL-2960) and the GND (Mechanism chassis) with the short jig about 10 seconds.

When the coaxial connector of the BT cable isn’t pulled out vertically toward the board, the connector may be damaged. So, when disconnecting
the connector, be sure to take the connector of the BT cable, and pull it out vertically toward the board.

1 k

 

Ω

/1 W

Wrap insulating tape

TP4201

C4270

Short jig

1k 

Ω

/1W resistor

(1-215-869-11)

BT cable

BT-003 board