DOWNLOAD Sony DCR-DVD505 / DCR-DVD505E / DCR-DVD905 / DCR-DVD905E (serv.man4) Service Manual ↓ Size: 1.52 MB | Pages: 102 in PDF or view online for FREE

6-50

DCR-DVD505/DVD505E/DVD905/DVD905E_ADJ

7) After setting the picture frame, if the [End] button is clicked,

“6. Picture Frame Setting (All White Frame)” is executed. The
following messages are displayed in the order given below
during the execution. Then, set the picture frame in accordance
with the messages.

8) After the setting, if the [OK] button is clicked, the adjustment

items from “7. AWB Standard Data Input” to “9. AWB Adj.”
are executed. During the execution, the following messages
are displayed in the order given below. Place or remove the
filters on the lens in accordance with the messages.

9) Upon successful completion of the “9. AWB Adj.”, the follow-

ing message is displayed. Then, change the chart in accordance
with the message.

17) Upon successful completion of all items of the CAMERA

Adjustment 4, the following message is displayed. Click the
[OK] button.

10) If the [OK] button is clicked, the adjustment items “10. Color

Reproduction Adj.” and “11. Color Reproduction Check (In-
door)” are executed. The following messages are displayed in
order, and then operate the vectorscope to make a check with
the color reproduction frame in accordance with the message.

R-Y

B-Y

R

B

G

M

G

Y

E

C

Y

Burst position

R-Y

B-Y

R

B

G

M

G

Y

E

C

Y

Burst position

6-51

DCR-DVD505/DVD505E/DVD905/DVD905E_ADJ

11) If the [OK] button is clicked, the adjustment items “12. Color

Reproduction Check (Outdoor)” is executed. The following
messages are displayed in order, and then operate the
vectorscope to make a check with the color reproduction frame
in accordance with the message.

R-Y

B-Y

R

B

G

M

G

Y

E

C

Y

Burst position

R-Y

B-Y

R

B

G

M

G

Y

E

C

Y

Burst position

6-52

DCR-DVD505/DVD505E/DVD905/DVD905E_ADJ

12) Upon successful completion of the “12. Color Reproduction

Check (Outdoor)”, the following message is displayed. Then,
change the chart in accordance with the message.

13) After the setting, if the [OK] button is clicked, the adjustment

items “13. AWB Check” is executed. During the execution,
the following messages are displayed in the order given be-
low. Place or remove the filters on the lens in accordance with
the messages, and check that the luminance point settles in the
circle.

14) Upon completion of “13. AWB Check”, the following mes-

sage is displayed during the execution of “14. Picture Frame
Setting (Center Frame)”. Set the subject in accordance with
the message, and then check the size of clear chart shot on the
monitor screen.

15) After the checking, if the [OK] button in the message window

is clicked, “15. MAX GAIN Adj.” is executed.

16) Upon successful completion of the “15. MAX GAIN Adj.”,

“16. Release of Data Setting during Camera Adj.” is executed.

17) Upon successful completion of all items of the CAMERA

Adjustment 4, the following message is displayed. Click the
[OK] button.

6-53

DCR-DVD505/DVD505E/DVD905/DVD905E_ADJ

Before perform the adjustment, turn off the power and turn
on again.

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Black Defect Adj.
3. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 6.
2) The Automatic Adjustment Program executes “1. Data Setting

during Camera Adj.”.

3) If “1. Data Setting during Camera Adj.” completed success-

fully, the following message is displayed. Set the subject in
accordance with the message.

4) Click the [OK] button, and the “2. Black Defect Adj.” will be

executed.

5) Upon completion of “2. Black Defect Adj.”, “3. Release of

Data Setting during Camera Adj.” is executed.

6) Upon successful completion of all items of the CAMERA Ad-

justment 6, the following message is displayed. Click the [OK]
button.

Perform readjustment after the power is supplied for sev-
eral minutes, if “White Defect Adjustment” failed.

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. HS White Defect Adj.
3. White Defect Adj.
4. White Defect Adj. (FD white point)
5. White Defect Check
6. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the 

[Start]

 button of the CAMERA Adjustment 5.

2) The Automatic Adjustment Program executes “1. Data Setting

during Camera Adj.”.

3) If “1. Data Setting during Camera Adj.” completed success-

fully, and the items from “2. HS White Defect Adj.” to “6.
Release of Data Setting during Camera Adj.” will be executed.

4) Upon successful completion of all items of the CAMERA

Adjustment 5, the following message is displayed. Click the

[OK]

 button.