DOWNLOAD Sony DCR-DVD505 / DCR-DVD505E / DCR-DVD905 / DCR-DVD905E (serv.man4) Service Manual ↓ Size: 1.52 MB | Pages: 102 in PDF or view online for FREE

6-42

DCR-DVD505/DVD505E/DVD905/DVD905E_ADJ

 6) After that, the following screen is displayed during the execu-

tion of “5. S VIDEO OUT Chroma Level Adj.”. Using the [Up]/
[Down] button on the screen, adjust so that the Cr signal level
and the Cb signal level satisfies the specified value. After the
adjustment, check that the burst level of the chroma signals
satisfies the specified value, and click the [End] button in the
screen.

7) If the [End]  button is clicked, “6. IC3401 Adj.” will be ex-

ecuted.

8) Upon successful completion of the “6. IC3401 Adj.”, “7.

VIDEO OUT Level Check” will be executed. The following
message and screen are displayed. Check that the sync signal
level and burst level of the video signals satisfies the specified
value, and click the [OK] button in the message.

9) If the [End] button is clicked, “8. Release of Data Setting dur-

ing Video Adj.” will be executed.

10) Upon successful completion of all item the VIDEO Adjust-

ment, the following message is displayed. Click the [OK] but-
ton.

6-43

DCR-DVD505/DVD505E/DVD905/DVD905E_ADJ

Click the [CAMERA SYSTEM ADJUSTMENT] button on the Main
Menu screen, and the “CAMERA SYSTEM ADJUSTMENT”
screen in Fig. 6-1-13 will appear.

1

[To Menu] button
The Main Menu screen comes back.

2

[Preparation] button
Notes for adjustment or jigs used are displayed.

3

[Start] button
Each adjustment from “Camera Adjustment 1” to “Camera
Adjustment 8” starts.

4

Model Select radio button
Selects the model to be adjusted.

NTSC model: DCR-DVD505/DVD905
PAL model: DCR-DVD505E/DVD905E

5

[Release Data Setting] button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the camera adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)

5

4

3

3

2

1

2

3

3

6-44

DCR-DVD505/DVD505E/DVD905/DVD905E_ADJ

The adjustment items of camera system adjustment are as listed in
Table 6-1-3. The Automatic Adjustment Program divides the ad-
justment items into eight, camera adjustment 1-8. Clicking either
CAMERA Adjustment Start button allows the adjustment item
which corresponds to that button to be executed.
The adjustment conditions of the subject and filter vary depend-
ing on which item is adjusted. The Adjustment Program displays
an instruction for the subject and filter as a message during the
adjustment.

HALL Adj.

69

D0 to D8

MR Adj.

6F

30, 40 to 4B

Differential Gain Adj.

Clear chart (All White)
(Shoot the clear chart with the zoom
TELE end.)

6E

00 to B3

Siemens star chart with ND filter for
minipattern box (Note) or
Flange back adjustment jig

Flange back adjustment chart and
subject more than 500 m away

CAMERA
Adjustment 3

Flange Back Check

Siemens star chart

F No. & ND Light Quality Standard
Data Input

69

E0 to EF

Mechanical Shutter Adj.

69

A0 to B5

Linear Matrix Adj.

6F

C8 to EB

AWB Standard Data Input

6F

88 to 97, F0 to F7

LV Standard Data Input

69

DC, DD

AWB Adj.

Clear chart (All White frame)
Filter C14 for color temperature
correction

6F

84 to 87, 98 to A7,
F8 to FF

Color Reproduction Adj.

6F

A8 to AF

Color Reproduction Check (Indoor)

Color Reproduction Check (Outdoor)

Color bar chart
(Color reproduction adjustment frame)
Filter C14 for color temperature
correction

AWB Check

Clear chart (All White frame)
ND filter 1.0, 0.4 and 0.1

MAX GAIN Adj.

Clear chart (Center frame)

69

DE

HS White Defect Adj.

White Defect Adj.

White Defect Adj. (FD white point)

White Defect Check

CAMERA
Adjustment 6

Black Defect Adj.

Clear chart (All White)
(Shoot the clear chart with the zoom
TELE end.)

Strobe Light Level Adj.

69

B8 to BD

Strobe White Balance Adj.

6F

80, 81

CAMERA
Adjustment 8

Steady Shot Check

Not required

11, 20 to 3F

Not required

CAMERA
Adjustment 5

CAMERA
Adjustment 7

Flash adjustment box

CAMERA
Adjustment 1

Not required

CAMERA
Adjustment 4

Not required

Clear chart (All White frame)

Color bar chart
(Color reproduction adjustment frame)

CAMERA
Adjustment 2

Flange Back Adj.

6F

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

Dark Siemens star chart.

6-45

DCR-DVD505/DVD505E/DVD905/DVD905E_ADJ

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. HALL Adj.
3. MR Adj.
4. Differential Gain Adj.
5. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 1.
2) The Automatic Adjustment Program executes “1. Data Setting

during Camera Adj.”.

3) If “1. Data Setting during Camera Adj.” completed success-

fully, and the items from “2. HALL Adj.” to “3. MR Adj.” will
be executed.

4) Upon successful completion of the “3. MR Adj.”, the follow-

ing message is displayed. Set the subject in accordance with
the message.

5) Click the [OK] button, and the “4. Differential Gain Adj.” will

be executed.

6) Upon completion of “4. Differential Gain Adj.”, “5. Release

of Data Setting during Camera Adj.” is executed.

7) Upon successful completion of all items of the CAMERA Ad-

justment 1, the following message is displayed. Click the [OK]
button.