Sony DCR-DVD406E / DCR-DVD408 / DCR-DVD408E / DCR-DVD506E / DCR-DVD508 / DCR-DVD508E / DCR-DVD808 / DCR-DVD808E / DCR-DVD908 / DCR-DVD908E (serv.man4) Service Manual ▷ View online
— 5 —
DCR-DVD406E/DVD408/DVD408E/DVD506E/DVD508/
DVD508E/DVD808/DVD808E/DVD908/DVD908E_L1
DVD508E/DVD808/DVD808E/DVD908/DVD908E_L1
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270°C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
CAUTION
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION:
The use of optical instrument with this product will increase eye
hazard.
hazard.
— 6 —
DCR-DVD406E/DVD408/DVD408E/DVD506E/DVD508/
DVD508E/DVD808/DVD808E/DVD908/DVD908E_L1
DVD508E/DVD808/DVD808E/DVD908/DVD908E_L1
3.
Self-diagnosis Code Table
C
C
C
C
Block
Function
0
4
1
3
1
3
3
2
Detailed
Code
0
0
0
1
0
2
6
0
Symptom/State
Non-standard battery is used.
“Memory Stick Duo” is unformatted.
“Memory Stick Duo” is broken.
“Memory Stick Duo” is broken.
Disc access error
Difficult to adjust focus
(Cannot initialize focus.)
(Cannot initialize focus.)
Self-diagnosis Code
Repaired by:
Correction
Use the InfoLITHIUM battery.
Format the “Memory Stick Duo”.
Insert a new “Memory Stick Duo”.
Insert a new “Memory Stick Duo”.
Clean the disc with the supplied cleaning cloth.
Use a compatible disc with the camcorder.
Use a compatible disc with the camcorder.
Retry turn the power on by the power switch.
1.
Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder or LCD
screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
function starts working, and displays on the viewfinder or LCD
screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
2. Self-diagnosis Display
When problems occur while the unit is operating, the counter of the
viewfinder or LCD screen shows a 4-digit display consisting of an
alphabet and numbers, which blinks at 3.2 Hz. This 5-character
display indicates the “repaired by:”, “block” in which the problem
occurred, and “detailed code” of the problem.
viewfinder or LCD screen shows a 4-digit display consisting of an
alphabet and numbers, which blinks at 3.2 Hz. This 5-character
display indicates the “repaired by:”, “block” in which the problem
occurred, and “detailed code” of the problem.
SELF-DIAGNOSIS FUNCTION
1 1
3 1
C
Repaired by:
Refer to “3. Self-diagnosis Code Table”.
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2Hz
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
H : Corrected by dealer
E : Corrected by service
engineer
Viewfinder or LCD screen
C : 3 1 : 1 1
— 7 —
DCR-DVD406E/DVD408/DVD408E/DVD506E/DVD508/
DVD508E/DVD808/DVD808E/DVD908/DVD908E_L1
DVD508E/DVD808/DVD808E/DVD908/DVD908E_L1
• Refer to the cover for mark
0
.
Checking supplied accessories.
AC Adaptor
(AC-L200/L200B)
(AC-L200/L200B)
0
1-479-285-21
Power Cord
0
1-555-074-91 (AUS)
0
1-782-476-71 (CH)
0
1-828-050-31 (JE)
0
1-823-945-41 (US, CND)
0
1-823-947-71 (KR)
0
1-827-269-31 (UK, HK)
0
1-827-826-41 (AEP, NE, E: PAL)
0
1-830-518-41 (E: NTSC)
Conversion (2P) Adaptor
0
1-569-007-12 (E: NTSC, JE)
Conversion (2P) Adaptor
0
1-569-008-12 (E: PAL)
CD-ROM
“Handycam Application Software”
“Handycam Application Software”
3-093-590-04
Wireless Remote Commander
RMT-835
RMT-835
1-479-275-41
A/V connecting Cable
1-823-156-51
USB cable
1-829-868-31
Rechargeable Battery Pack
NP-FH60
NP-FH60
0
A-1201-666-A (US, CND)
0
A-1201-667-A
(EXCEPT US, CND, CH)
(EXCEPT US, CND, CH)
0
A-1201-668-A (CH)
DVD-ROM
“ENJOY HANDYCAM”
“ENJOY HANDYCAM”
3-093-691-01 (KR)
ENGLISH / KOREAN / JAPANESE
3-093-691-11 (US, CND, E)
ENGLISH / FRENCH / SPANISH / PORTUGUESE
3-093-691-21 (UK, NE, EE)
ENGLISH / RUSSIAN / GERMAN
3-093-691-31 (AEP)
ENGLISH / SPANISH / PORTUGUESE / ITALIAN
3-093-691-41 (AEP)
ENGLISH / FRENCH / PORTUGUESE / DUTCH
3-093-691-61 (E, AUS, HK, CH)
ENGLISH / FRENCH / SIMPLIFIED CHINESE for CHINA /
TRADITIONAL CHINESE for HONG KONG
TRADITIONAL CHINESE for HONG KONG
3-093-691-71 (E)
ENGLISH / TRADITIONAL CHINESE for TAIWAN / SPANISH /
PORTUGUESE
PORTUGUESE
Other accessories
2-319-640-11 MANUAL, INSTRUCTION (ENGLISH)
(DVD408/DVD508) (US, CND, JE)
2-319-640-21 MANUAL, INSTRUCTION (FRENCH)
(DVD408/DVD508) (CND)
2-319-640-31 MANUAL, INSTRUCTION (SPANISH)
(DVD408/DVD508) (E, JE)
2-319-640-51 MANUAL, INSTRUCTION (TRADITIONAL CHINESE)
(DVD808/DVD908) (E)
2-319-640-61 MANUAL, INSTRUCTION (KOREAN)
(DVD408/DVD508/DVD808/DVD908) (KR, JE)
2-319-641-11 MANUAL, INSTRUCTION (ENGLISH)
(DVD406E/DVD408E/DVD506E/DVD508E/DVD808E/DVD908E)
(AEP, UK, E, HK, AUS, JE)
2-319-641-21 MANUAL, INSTRUCTION (FRENCH)
(DVD406E/DVD506E/DVD808E/DVD908E) (AEP)
2-319-641-31 MANUAL, INSTRUCTION (GERMAN)
(DVD406E/DVD506E) (AEP)
2-319-641-41 MANUAL, INSTRUCTION (DUTCH)
(DVD406E/DVD506E) (AEP)
2-319-641-51 MANUAL, INSTRUCTION (SPANISH)
(DVD406E/DVD506E) (AEP)
2-319-641-71 MANUAL, INSTRUCTION (ITALIAN)
(DVD406E/DVD506E) (AEP)
2-319-641-81 MANUAL, INSTRUCTION (GREEK)
(DVD406E/DVD506E) (AEP)
2-319-641-91 MANUAL, INSTRUCTION (RUSSIAN)
(DVD408E/DVD508E) (NE, JE)
2-319-642-11 MANUAL, INSTRUCTION (SWEDISH)
(DVD408E/DVD508E) (NE)
2-319-642-21 MANUAL, INSTRUCTION (DANISH)
(DVD408E/DVD508E) (NE)
2-319-642-31 MANUAL, INSTRUCTION (FINNISH)
(DVD408E/DVD508E) (NE)
2-319-642-41 MANUAL, INSTRUCTION (POLISH)
(DVD406E/DVD506E) (EE)
2-319-642-51 MANUAL, INSTRUCTION (CZECH)
(DVD406E/DVD506E) (EE)
2-319-642-61 MANUAL, INSTRUCTION (HUNGARIAN)
(DVD406E/DVD506E) (EE)
2-319-642-71 MANUAL, INSTRUCTION (SLOVAK)
(DVD406E/DVD506E) (EE)
2-319-642-91 MANUAL, INSTRUCTION (SIMPLIFIED CHINENES)
(DVD408E/DVD508E/DVD808E/DVD908E) (E, CH, JE)
3-098-557-41 MANUAL, INSTRUCTION (TRADITIONAL CHINESE)
(DVD808E/DVD908E) (HK)
3-098-557-51 MANUAL, INSTRUCTION (ARABIC)
(DVD808E/DVD908E) (E)
3-098-557-61 MANUAL, INSTRUCTION (PERSIAN)
(DVD808E/DVD908E) (E)
Ver 1.3 2007.07
Revision History
Reverse
Ver.
1.0
1.1
1.2
1.3
Date
2007.01
2007.04
2007.05
2007.07
History
Official Release
Revised-1
Correction-1
(C1)
(C1)
Revised-2
Contents
—
Correction of errors
Correction of ACCESSORIES
S.M Correction:
S.M Correction:
page 7
Change of ACCESSORIES
S.M Correction:
S.M Correction:
page 7
S.M. Rev.
issued
—
Yes
Yes
Yes
DCR-DVD406E/DVD408/DVD408E/DVD506E/DVD508/
DVD508E/DVD808/DVD808E/DVD908/DVD908E_L1
DVD508E/DVD808/DVD808E/DVD908/DVD908E_L1
985217944.pdf
Display