DOWNLOAD Sony DCR-DVD406E / DCR-DVD408 / DCR-DVD408E / DCR-DVD506E / DCR-DVD508 / DCR-DVD508E / DCR-DVD808 / DCR-DVD808E / DCR-DVD908 / DCR-DVD908E (serv.man6) Service Manual ↓ Size: 153.7 KB | Pages: 4 in PDF or view online for FREE

DCR-DVD406E/DVD408/DVD408E/DVD506E/DVD508/DVD508E/DVD808/DVD808E/DVD908/DVD908E_ADJ

2007C0500-1

© 2007.3

(DI06-185)

Double-click the application file (DCR-DVD408 Series Auto-Adj
Ver_1.2r02.exe), and the Automatic Adjustment Program will start.

When the Automatic Adjustment Program started, the Main Menu
screen in Fig. 6-1-9 will appear. On this screen, select each adjust-
ment section.

qs

This part indicates the version of Automatic Adjustment Pro-
gram.

3

5

4

7

8

6

2

1

q;

qa

qs

9

— 2 —

DCR-DVD406E/DVD408/DVD408E/DVD506E/DVD508/DVD508E/DVD808/DVD808E/DVD908/DVD908E_ADJ

Note 3: If the DVD-R Disc for Self Jitter, DVD-RW Reference + DOW Disc and DVD+RDL Self Disc exceeds the use limit, the

following message will be displayed. Replace it with a new disc and click the [OK] button in the message window.
The disc use counts are saved in the PC. Accordingly, the disc and PC used for diagnosis and adjustment must always be
controlled in the same combination.
If the disc is used with another PC, it will be recognized as a new disc, causing the use limit to be unknown.

Note 3: If the use counts of the DVD-R Disc for Self Jitter, DVD-RW Reference + DOW Disc, or DVD+RDL Disc for Self Jitter

exceed respective limits, the following message will be displayed. Replace it with a new disc and click the [OK] button in the
message window.
The disc use counts are saved in the PC. Accordingly, the disc used for diagnosis and adjustment, PC and drive adjustment
program (AUDIT for 2007) must always be controlled in the same combination.
If the disc is used with another PC or other versions (AUDIT for Service, AUDIT for UX1, etc.), the diagnosis and adjust-
ment will fail and that disc will no longer be able to use.

注3：DVD-R セルフジッターディスク，DVD-RWリファレンス+ DOWディスクとDVD+RDLセルフジッターディスクは，

使用限度を超えると次のメッセージが表示されます。新しいディスクと交換して，メッセージの[OK]ボタンをクリッ

クしてください。 

ディスクの使用回数は，PC内部に保存されます。このため，診断・調整で使用するディスクとPCおよびドライブ

調整プログラム（AUDIT for 2007）は，常に同一の組み合わせになるように管理してください。 

別のPCや他のバージョン（AUDIT for Service，AUDIT for UX1等）でディスクを使用すると，診断・調整が正常に

行われずNGとなってしまい，そのディスクが使用不可能になってしまう場合があります。 

— 3 —

DCR-DVD406E/DVD408/DVD408E/DVD506E/DVD508/DVD508E/DVD808/DVD808E/DVD908/DVD908E_ADJ

&

(Service manual page 6-53)
Click the [SERVICE MODE] button on the Main Menu screen, and
the “SERVICE MODE” screen in Fig. 6-3-2 will appear.

1

[To Menu] button
The Main Menu screen comes back.

2

[Switch Check] button
“SWITCH CHECK” screen appears.

3

[LED Check] button
“LED CHECK” screen appears.

4

[Jack Check] button
“JACK CHECK” screen appears.

5

[Lens Barrier Check] button
“LENS BARRIER CHECK” screen appears.

6

[Record Data] button
“RECORD DATA” screen appears.

7

[Shift Lens Check] button
“SHIFT LENS CHECK” screen appears.

*

&

(Service manual page 6-55)
Click the [Record Data] button on the SERVICE MODE screen,
and the “RECORD DATA” screen will appear.

The record data such as use record and self-diagnostic record are
displayed.

Initializing method (Self-Diagnosis Data Only):
Click the [Clear Self-Diagnosis Data Only] button on the screen, and
the Self-Diagnosis Data will be initialized.

Note: If a flash error (self-diagnosis code E:91:**) occurred, all

recorded data must be initialized to reset the error. The
error cannot be reset by initializing the self-diagnosis data
only.

Initializing method (All Record-Data):
Click the [Clear All Recorded-Data] button on the screen, and the
All Recorded-Data will be initialized.
Note: Performing the initialization causes all the user settings in-

cluding time setting to be initialized, too.

(

1

5

2

3

4

6

7

— 4 —

DCR-DVD406E/DVD408/DVD408E/DVD506E/DVD508/DVD508E/DVD808/DVD808E/DVD908/DVD908E_ADJ

&

[Check 2 using method]
Use this menu when E:62:11 (Shift Lens Overheating (Pitch))
occurred.
Click the [Check 2 Start] button, and the shift lens will move in
up and down directions. If the shift lens does not move, replace
the lens block.

[Check 3 using method]
Use this menu when E:62:12 (Shift Lens Overheating (Yaw))
occurred.
Click the [Check 3 Start] button, and the shift lens will move in
left and right directions. If the shift lens does not move, replace
the lens block.

Use the “Shift Lens Check” when the following self diagnostic
codes are displayed.

•

E:62:10 [Shift Lens Initializing Failure]

•

E:62:11 [Shift Lens Overheating (Pitch)]

•

E:62:12 [Shift Lens Overheating (Yaw)]

Click the [Shift Lens Check] button on the Service Mode screen,
and the “SHIFT LENS CHECK” screen will appear.

[Check 1 using method]
Use this menu when E:62:10 (Shift Lens Initializing Failure) oc-
curred.
Click the [Check 1 Start] button, and the “EEPROM Check” and
“Steady Hall Adjustment” will be executed.

•

When “Steady Hall Adjustment” is executed, the shift lens will
move in up, down, left, and right directions. If the shift lens
does not move at all and a message “Shift Lens Check 1 Com-
plete” is displayed, or if an error message of Steady Hall Ad-
justment is displayed, replace the lens block.

•

Check the peripheral circuits (particularly EEPROM (IC1804))
of the IC1803 on the VC-478 board, when the following mes-
sage is displayed.

+