Sony DCR-DVD205 / DCR-DVD205E / DCR-DVD304E / DCR-DVD305 / DCR-DVD305E / DCR-DVD705 / DCR-DVD705E / DCR-DVD755 / DCR-DVD755E (serv.man4) Service Manual ▷ View online
6-62
DCR-DVD205/DVD205E/DVD304E/DVD305/
DVD305E/DVD705/DVD705E/DVD755/DVD755E_ADJ
DVD305E/DVD705/DVD705E/DVD755/DVD755E_ADJ
START button
Status lamp
Adjustment buttons
Fig. 6-2-13
2-5.
DVD-R ADJUSTMENT
2-5-1.
Menu in DVD-R Adjustment Section
START button:
All items of adjustment buttons are ex-
ecuted in the descending order.
ecuted in the descending order.
Adjustment button:
Only the adjustment item assigned to the
button name is executed.
button name is executed.
Status lamp:
Adjustment status is displayed with color.
White ················ Not adjusted
Red blinking ···· Adjustment in progress
Green ················ Adjustment OK
Red ··················· Adjustment NG
White ················ Not adjusted
Red blinking ···· Adjustment in progress
Green ················ Adjustment OK
Red ··················· Adjustment NG
6-63
DCR-DVD205/DVD205E/DVD304E/DVD305/
DVD305E/DVD705/DVD705E/DVD755/DVD755E_ADJ
DVD305E/DVD705/DVD705E/DVD755/DVD755E_ADJ
Order
1
2
3
4
5
6
7
8
9
10
Diagnostic item
OP Sensitivity
Offset Adjust
Wobble BPF
Center
FE Balance
Write FE Bal
Disc Distinction
Threshold
Servo Adjust
Jitter & BLER
Operation
Click the
[START]
button of “DVD-R Ad-
justment”.
Set the DVD-R Reference Disc, and then
close the disc cover and click the
close the disc cover and click the
[OK]
but-
ton in the message window.
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
Remove the DVD-R Reference Disc, and set
the DVD-R for Self Jitter Disc, and then close
the disc cover and click the
the DVD-R for Self Jitter Disc, and then close
the disc cover and click the
[OK]
button in
the message window.
Remove the DVD-R for Self Jitter Disc.
(On the AUDIT screen, if the status lamps of
respective adjustment buttons are all lit in
green, the adjustment is over.)
(On the AUDIT screen, if the status lamps of
respective adjustment buttons are all lit in
green, the adjustment is over.)
Message
Disc
No Disc
DVD-R
Reference Disc
Reference Disc
DVD-R
for Self Jitter Disc
for Self Jitter Disc
No Disc
2-5-2.
Adjusting Method
Note:
Before exiting the AUDIT, click the
[SET]
button of “After completing the TEST” to cancel the TEST mode.
6-64
DCR-DVD205/DVD205E/DVD304E/DVD305/
DVD305E/DVD705/DVD705E/DVD755/DVD755E_ADJ
DVD305E/DVD705/DVD705E/DVD755/DVD755E_ADJ
2-6.
DVD-RW ADJUSTMENT
2-6-1.
Menu in DVD-RW Adjustment Section
START button:
All items of adjustment buttons are ex-
ecuted in the descending order.
ecuted in the descending order.
Adjustment button:
Only the adjustment item assigned to the
button name is executed.
button name is executed.
Status lamp:
Adjustment status is displayed with color.
White ················ Not adjusted
Red blinking ···· Adjustment in progress
Green ················ Adjustment OK
Red ··················· Adjustment NG
White ················ Not adjusted
Red blinking ···· Adjustment in progress
Green ················ Adjustment OK
Red ··················· Adjustment NG
Fig. 6-2-14
START button
Status lamp
Adjustment buttons
2-6-2.
Adjusting Method
Note:
Before exiting the AUDIT, click the [SET] button of “After completing the TEST” to cancel the TEST mode.
Order
1
2
3
4
5
6
7
8
9
10
Diagnostic item
OP Sensitivity
Offset Adjust
FE Balance
Write FE Bal
Servo Adjust
Disc Distinction
Threshold
Write Offset
Jitter & BLER
Operation
Click the
[START]
button of “DVD-RW Ad-
justment”.
Set the DVD-RW Reference + DOW Disc,
and then close the disc cover and click the
and then close the disc cover and click the
[OK]
button in the message window.
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
Remove the DVD-RW Reference + DOW
Disc. (On the AUDIT screen, if the status
lamps of respective adjustment buttons are
all lit in green, the adjustment is over.)
Disc. (On the AUDIT screen, if the status
lamps of respective adjustment buttons are
all lit in green, the adjustment is over.)
Message
Disc
No Disc
DVD-RW
Reference + DOW
Disc
Reference + DOW
Disc
No Disc
6-65
DCR-DVD205/DVD205E/DVD304E/DVD305/
DVD305E/DVD705/DVD705E/DVD755/DVD755E_ADJ
DVD305E/DVD705/DVD705E/DVD755/DVD755E_ADJ
START button
Status lamp
Adjustment buttons
Fig. 6-2-15
Order
1
2
3
4
5
Diagnostic item
Wobble BPF
Center
Jiter & BLER
Data Dump
Operation
Click the
[START]
button of “DVD+RW Ad-
justment”.
Set the DVD+RW Reference Disc, and then
close the disc cover and click the
close the disc cover and click the
[OK]
but-
ton in the message window.
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
Remove the DVD+RW Reference Disc.
(On the AUDIT screen, if the status lamps of
respective adjustment buttons are all lit in
green, the adjustment is over.)
(On the AUDIT screen, if the status lamps of
respective adjustment buttons are all lit in
green, the adjustment is over.)
Message
Disc
No Disc
DVD+RW
Reference Disc
Reference Disc
No Disc
2-7.
DVD+RW ADJUSTMENT
2-7-1.
Menu in DVD+RW Adjustment Section
START button:
All items of adjustment buttons are ex-
ecuted in the descending order.
ecuted in the descending order.
Adjustment button:
Only the adjustment item assigned to the
button name is executed.
button name is executed.
Status lamp:
Adjustment status is displayed with color.
White ················ Not adjusted
Red blinking ···· Adjustment in progress
Green ················ Adjustment OK
Red ··················· Adjustment NG
White ················ Not adjusted
Red blinking ···· Adjustment in progress
Green ················ Adjustment OK
Red ··················· Adjustment NG
2-7-2.
Adjusting Method
Note:
Before exiting the AUDIT, click the [SET] button of “After completing the TEST” to cancel the TEST mode.
Click on the first or last page to see other DCR-DVD205 / DCR-DVD205E / DCR-DVD304E / DCR-DVD305 / DCR-DVD305E / DCR-DVD705 / DCR-DVD705E / DCR-DVD755 / DCR-DVD755E (serv.man4) service manuals if exist.