Sony DCR-DVD202E / DCR-DVD203 / DCR-DVD203E / DCR-DVD703 / DCR-DVD703E (serv.man4) Service Manual ▷ View online
6-9
DCR-DVD202E/DVD203/DVD203E/DVD703/DVD703E
4.
A Page table
Note 1:
Check that the data of page: 0, address: 10 is“00”.
Note 2:
Fixed data-1: Initialized data. (Refer to“1. Initializing the
9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to“2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to“2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
10
00
00
Test mode
11 to 4A
Fixed data-1 (Initialized data)
4B
Fixed data-2
4C
Fixed data-1 (Initialized data)
4D
Fixed data-2
4E, 4F
Fixed data-1 (Initialized data)
50
Fixed data-2
51 to 5F
Fixed data-1 (Initialized data)
60
61
62
63
Fixed data-2
64
65
66 to 8F
Fixed data-1 (Initialized data)
90
E7
EA
91
13
10
92
CD
C3
Touch panel adj. 1
93
25
1D
94 to 9F
Fixed data-1 (Initialized data)
A0
A1
A2
A3
A4
A5
A6
Fixed data-2
A7
A8
A9
AA
AB
AC
AD to B6
Fixed data-1 (Initialized data)
B7
Fixed data-2
B8
Fixed data-1 (Initialized data)
B9
Fixed data-2
BA to D1
Fixed data-1 (Initialized data)
D2
Fixed data-2
D3 to DF
Fixed data-1 (Initialized data)
E0
E1
Fixed data-2
E2
Address
Initial value
Remark
NTSC PAL
E3
E4
Fixed data-2
E5
E6
Fixed data-1 (Initialized data)
E7
E8
Fixed data-2
E9 to FF
Fixed data-1 (Initialized data)
6-10
DCR-DVD202E/DVD203/DVD203E/DVD703/DVD703E
9.
17 Page table
Note 1:
If reading/writing data on pages 17, set data: 01 to page:
0, address: 10, and then select pages: 7. By this data set-
ting, the pages 17 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 7. By this data set-
ting, the pages 17 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
7.
13 Page table
Note 1:
If reading/writing data on pages 13, set data: 01 to page:
0, address: 10, and then select pages: 3. By this data set-
ting, the pages 13 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 3. By this data set-
ting, the pages 13 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to 1D
Fixed data-1 (Initialized data)
1E
Fixed data-2
1F to FF
Fixed data-1 (Initialized data)
6.
D Page table
Note 1:
Check that the data of page: 0, address: 10 is “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
10 to 13
Fixed data-1 (Initialized data)
14
Fixed data-2
15
Fixed data-1 (Initialized data)
16
17
Fixed data-2
18 to 27
Fixed data-1 (Initialized data)
28
29
2A
2B
2C
Fixed data-2
2D
2E
2F
30
31, 32
Fixed data-1 (Initialized data)
33
Fixed data-2
34 to 56
Fixed data-1 (Initialized data)
57
Fixed data-2
58 to 70
Fixed data-1 (Initialized data)
5.
B Page table
Note 1:
Check that the data of page: 0, address: 10 is “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
8.
15 Page table
Note 1:
If reading/writing data on pages 15, set data: 01 to page:
0, address: 10, and then select pages: 5. By this data set-
ting, the pages 15 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 5. By this data set-
ting, the pages 15 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
6-11
DCR-DVD202E/DVD203/DVD203E/DVD703/DVD703E
10. 1A Page table
Note 1:
Note 1:
If reading/writing data on pages 1A, set data: 01 to page:
0, address: 10, and then select pages: A. By this data set-
ting, the pages 1A can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: A. By this data set-
ting, the pages 1A can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to 0F
Fixed data-1 (Initialized data)
10
6A
69
11
97
97
12
80
80
13
80
80
14
6A
69
15
97
97
16
80
80
17
80
80
18
6A
69
19
97
97
1A
80
80
1B
80
80
1C
80
80
1D
80
80
1E
80
80
1F
80
80
20
80
80
21
80
80
22
80
80
23
80
80
Touch panel adj. 2
24
80
80
25
80
80
26
80
80
27
80
80
28
6A
69
29
97
97
2A
70
80
2B
8C
6F
2C
6A
69
2D
97
97
2E
70
80
2F
8C
6F
30
6A
69
31
97
97
32
70
80
33
8C
6F
34
80
80
35
80
80
36
70
80
11. 1B Page table
Note 1:
Note 1:
If reading/writing data on pages 1B, set data: 01 to page:
0, address: 10, and then select pages: B. By this data set-
ting, the pages 1B can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: B. By this data set-
ting, the pages 1B can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
the 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
Address
Initial value
Remark
NTSC PAL
37
8C
6F
38
80
80
39
80
80
3A
70
80
3B
8C
6F
Touch panel adj. 2
3C
80
80
3D
80
80
3E
70
80
3F
8C
6F
40 to FF
Fixed data-1 (Initialized data)
6-12
DCR-DVD202E/DVD203/DVD203E/DVD703/DVD703E
2.
Modification of E, F, 14, 19, 1E, 1F Page Data
If the E, F, 14, 19, 1E, 1F page data has been initialized, change
the data of the “Fixed data-2” address shown in the following table
by manual input.
the data of the “Fixed data-2” address shown in the following table
by manual input.
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) If modification of data on pages E, F, set data: 00 to page: 0,
address: 10, and then select pages E, F.
3) If modification of data on pages 14, 19, 1E, 1F, set data: 01 to
page: 0, address: 10, and then select pages 4, 9, E, F.
After the modification of data finished, return the data on page:
0, address: 10 to “00”.
After the modification of data finished, return the data on page:
0, address: 10 to “00”.
4) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
the data built in the same model.
Note 1:
If copy the data built in the different model, the
camcorder may not operate.
camcorder may not operate.
5) When changing the data, press the PAUSE button of the ad-
justment remote commander each time when setting new data
to write the data in the non-volatile memory.
to write the data in the non-volatile memory.
6) Check that the data at the addresses for adjustment are initial
values (adjustment initial values) listed in the table.
If different, change them to the adjustment initial values.
If different, change them to the adjustment initial values.
Processing after Completing Modification E, F, 14, 19, 1E,
1F page data:
1F page data:
Order Page Address Data
Procedure
1
0
10
00
2
2
00
29
3
2
01
29
Press PAUSE button.
Note 2:
This operation should be done with the adjustment re-
mote commander. The operation of page: 02 cannot be
performed with the SeusCam.
mote commander. The operation of page: 02 cannot be
performed with the SeusCam.
1-2-2.
Initialization of E, F, 14, 19, 1E, 1F Page Data
1.
Initializing of E, F, 14, 19, 1E, 1F Page Data
Note 1:
If “Initialization of Pages E, F, 14, 19, 1E, 1F” is ex-
ecuted, all data on pages E, F, 14, 19, 1E, 1F are initial-
ized. (Only an individual page cannot be initialized)
ecuted, all data on pages E, F, 14, 19, 1E, 1F are initial-
ized. (Only an individual page cannot be initialized)
Note 2:
If the E, F, 14, 19, 1E, 1F page data has been initialized,
the following adjustments need to be performed again.
1) Modification of E, F, 14, 19, 1E, 1F page data
2) Camera system adjustment
the following adjustments need to be performed again.
1) Modification of E, F, 14, 19, 1E, 1F page data
2) Camera system adjustment
Adjustment Page
E
Adjustment Address
00 to FF
Adjustment Page
F
Adjustment Address
10 to FF
Adjustment Page
14
Adjustment Address
00 to FF
Adjustment Page
19
Adjustment Address
00 to FF
Adjustment Page
1E
Adjustment Address
00 to FF
Adjustment Page
1F
Adjustment Address
00 to FF
Initializing method:
Order Page Address Data Procedure
1
0
01
01
2
0
10
00
Set the following data, and
press PAUSE button.
press PAUSE button.
3
6
01
2D: NTSC model
2F: PAL model
2F: PAL model
4
6
03
01
Press PAUSE button.
5
Wait for 6 seconds
6
6
02
Check the data changes to
“01”.
“01”.
7
Perform “Modification of E,
F, 14, 19, 1E, 1F Page Data”
F, 14, 19, 1E, 1F Page Data”
Note 3:
NTSC model: DCR-DVD203/DVD703
PAL model: DCR-DVD202E/DVD203E/DVD703E
PAL model: DCR-DVD202E/DVD203E/DVD703E
Click on the first or last page to see other DCR-DVD202E / DCR-DVD203 / DCR-DVD203E / DCR-DVD703 / DCR-DVD703E (serv.man4) service manuals if exist.