Sony DCR-DVD201 / DCR-DVD201E (serv.man11) Service Manual ▷ View online
Sony EMCS Co.
2005D1600-1
©2005.04
Published by DI Technical Support Section
9-876-715-92
SERVICE MANUAL
Ver 1.1 2005. 04
ADJ
DCR-DVD201/DVD201E
• Correction of adjustments
CORRECTION-1
Correct your service manual as shown below.
SECTION 6 ADJUSTMENTS
6-3. SERVICE MODE
3-3. SERVICE MODE
: Deleted portion
Page
CORRECT
6-44
DCR-DVD201/DVD201E
RMT-835
2. Emergence Memory Address (Camera section)
Page 19
Address 87 to 8A
Note:
When reading or writing the 19 page data, select page: 0, address:
10, and set data: 01, then select 9 page. The 19 page can be chosen
by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.
10, and set data: 01, then select 9 page. The 19 page can be chosen
by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
“00”.
2-1. EMG Code (Emergency Code)
Codes corresponding to the errors which occur are written in 19
page, addresses 87 to 8A. The type of error indicated by the code
are shown in the following table.
page, addresses 87 to 8A. The type of error indicated by the code
are shown in the following table.
Contents
EMG code when first error occurs
EMG code when second error occurs
EMG code when third error occurs
EMG code when last error occurs
Address
87
88
89
8A
Note:
After completing adjustments, be sure to initialize the data of
addresses 87 to 8A to “00”.
addresses 87 to 8A to “00”.
Initializing method:
1)
1)
Select page: 0, address: 01, and set data: 01.
2)
Select page: 0, address: 10, and set data: 00.
3)
Select page: 6, address: 01, set data: FD and press the PAUSE
button.
button.
4)
Check that the data of page: 6, address: 02 is “01”.
5)
Select page: 6, address: 01, set data: 00 and press the PAUSE
button.
button.
6)
Select page: 0, address: 01, and set data: 00.
Emergency Type
No error
Code
00
Display
