Sony DCR-DVD105 (serv.man3) Service Manual ▷ View online
6-2
DCR-DVD105
Precaution on Replacing the VC-421 board
• Perform “Exif Model Data Check” mentioned below, and also the adjustment items necessary after VC Board re-
placement.
Exif Model Data Check
When you replace to the repairing board, the written data of repairing board also might be changed to original setting.
When the data has changed because of board replaceing etc, check the data setting (Exif Model Data) is right. If not,
rewrite to the right value.
When the data has changed because of board replaceing etc, check the data setting (Exif Model Data) is right. If not,
rewrite to the right value.
Exif Model Data
Writing Method:
1) Select page: 0, address: 01 and set data: 01.
2) Select page: A, address: B7 to BA, and set the Exif Model Data.
1) Select page: 0, address: 01 and set data: 01.
2) Select page: A, address: B7 to BA, and set the Exif Model Data.
Note:
To write in the non-volatile memory (EEPROM), press the PAUSE (Write) button each time to set the data.
3) Select page: 0, address: 01, and set data: 00.
Page
A
A
A
A
Data
DCR-DVD105
31
30
35
00
DCR-DVD605
36
30
35
00
DCR-DVD105E
31
30
35
45
DCR-DVD605E
36
30
35
45
Address
B7
B8
B9
BA
6-3
DCR-DVD105
1-1. Adjusting items when replacing main parts and boards
•
Adjusting items when replacing main parts
When replacing main parts, adjust the items indicated by z in the following table.
Note 1:
The Automatic Adjustment Program does not support
Lens device
Drive block
LCD block LCD9001 (LCD panel)
EVF block LCD9002 (LCD panel)
CD-600 board IC6001 (CCD imager )
LB-116 board D302 (EVF backlight)
MA-440 board SE6301, 6302 (YAW, PITCH sensor)
PD-267 board D6503 - 6505 (LCD backlight)
VC-421 board IC1101 (S/H, AGC, A/D converter)
VC-421 board IC1201, X1201 (Timing generator)
VC-421 board IC2701 (Video/Audio DSP)
VC-421 board IC2901 (Video, Audio I/O)
VC-421 board IC3701 (EVR)
VC-421 board IC4001 (RF process)
VC-421 board IC4101 (DVD DSP)
VC-421 board IC4302 (DVD mecha drive)
VC-421 board IC5101 (LCD/EVF driver)
Initialization of 9, A, B, D,
15, 17, 1A, 1B, page data
Initialization of E, F, 19, 1E, 1F page data
Initialization of C, 1C page data
15, 17, 1A, 1B, page data
Initialization of E, F, 19, 1E, 1F page data
Initialization of C, 1C page data
(Note 1)
36MHz origin oscillation adj.
z
z
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
S VIDEO OUT chroma level adj.
CAMERA
adjustment 2
adjustment 2
Flange back adj.
z
z
CAMERA
adjustment 3
adjustment 3
Flange back check
z
z
F No. standard data input
Color reproduction adj.
AWB standard data input
LV standard data input
Auto white balance adj.
MAX GAIN adj.
Color reproduction adj.
AWB standard data input
LV standard data input
Auto white balance adj.
MAX GAIN adj.
CAMERA
adjustment 5
adjustment 5
Steady shot check
z
LCD automatic adj.
V-COM adj. (LCD)
V-COM adj. (LCD)
Transmissive moed
white balance adj. (LCD)
Reflective mode
white balance adj. (LCD)
EVF automatic adj.
White balance adj. (EVF)
white balance adj. (LCD)
Reflective mode
white balance adj. (LCD)
EVF automatic adj.
White balance adj. (EVF)
POWER adj.
z
z
z
z
DVD-R adj.
z
z
z
z
DVD-RW adj.
z
z
z
z
DVD+RW adj.
z
z
z
z
z
z
z
z
z
Parts replacement
Replaceed parts
Block replacement
z
z
z
Adjustment
CAMERA
adjustment 1
adjustment 1
Adjusting item
(Note 1)
HALL adj.
VIDEO
adjustment
adjustment
AUDIT
LCD
adjustment
adjustment
EVF
adjustment
adjustment
CAMERA
adjustment 4
adjustment 4
z
z
z
z
Touch panel
adjustment
adjustment
z
Touch panel adj.
z
z
Table 6-1-1 (1)
6-4
DCR-DVD105
•
Adjusting items when replacing a board or EEPROM
When replacing a board or EEPROM, adjust the items indicated by z in the following table.
Note 2:
IC3101 (Flash memory) on
the VC-421 board and
IC4202 (Flash memory) on
the VC-421 board cannot be
replaced.
the VC-421 board and
IC4202 (Flash memory) on
the VC-421 board cannot be
replaced.
Note 3:
When replacing the VC-421
board, perform “Exif Model
Data Check” after replace-
ment.
board, perform “Exif Model
Data Check” after replace-
ment.
CD-600 board (COMPLETE)
LB-116 board (COMPLETE)
MA-440 board (COMPLETE)
PD-267 board (COMPLETE)
VC-421 board (COMPLETE) (Note 3)
VC-421 board IC2602 (EEPR
OM)
VC-421 board IC3003 (EEPR
OM)
Initialization of 9, A, B, D,
15, 17, 1A, 1B, page data
15, 17, 1A, 1B, page data
z
z
Initialization of E, F, 19, 1E, 1F page data
z
z
Initialization of C, 1C page data
z
z
(Note 1)
36MHz origin oscillation adj.
z
z
S VIDEO OUT Y level adj.
z
z
S VIDEO OUT chroma level adj.
CAMERA
adjustment 2
adjustment 2
Flange back adj.
z
z
z
CAMERA
adjustment 3
adjustment 3
Flange back check
z
z
z
F No. standard data input
Color reproduction adj.
AWB standard data input
LV standard data input
Auto white balance adj.
MAX GAIN adj.
Color reproduction adj.
AWB standard data input
LV standard data input
Auto white balance adj.
MAX GAIN adj.
CAMERA
adjustment 5
adjustment 5
Steady shot check
z
z
LCD automatic adj.
V-COM adj. (LCD)
V-COM adj. (LCD)
Transmissive moed
white balance adj. (LCD)
Reflective mode
white balance adj. (LCD)
EVF automatic adj.
White balance adj. (EVF)
white balance adj. (LCD)
Reflective mode
white balance adj. (LCD)
EVF automatic adj.
White balance adj. (EVF)
POWER adj.
z
DVD-R adj.
z
DVD-RW adj.
z
DVD+RW adj.
z
z
z
z
EVF
adjustment
adjustment
AUDIT
CAMERA
adjustment 4
adjustment 4
LCD
adjustment
adjustment
Touch panel
adjustment
adjustment
z
z
Adjusting item
Adjustment
CAMERA
adjustment 1
adjustment 1
HALL adj.
VIDEO
adjustment
adjustment
EEPROM
replacement
Board
replacement
(Note 1)
z
z
z
z
z
z
z
Touch panel adj.
z
Table 6-1-1 (2)
6-5
DCR-DVD105
Fig. 6-1-1 (1)
Personal computer
(Note 1, 2)
(Note 1, 2)
J-1
HASP key and application
for adjustment (SeusCam)
for adjustment (SeusCam)
Contact our service headquater of each area
how to get the application for adjustment
(SeusCam) and HASP key.
how to get the application for adjustment
(SeusCam) and HASP key.
J-2
USB cable
1-829-579-61
1-829-579-61
J-3
J-4
Adjustment remote
commander
(RM-95)
J-6082-053-B
commander
(RM-95)
J-6082-053-B
J-13
J-9
J-7
Pattern box PTB-450
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-10
Color bar chart
For PTB-450:
J-6020-250-A
J-6020-250-A
For PTB-1450:
J-6082-559-A
J-6082-559-A
J-11
Clear chart
For PTB-450:
J-6080-621-A
J-6080-621-A
For PTB-1450:
J-6082-560-A
J-6082-560-A
J-12
Minipattern box
J-6082-353-B
J-6082-353-B
Siemens star chart
J-6080-875-A
J-6080-875-A
Filter for color
temperature correction
(C14)
J-6080-058-A
temperature correction
(C14)
J-6080-058-A
J-14
ND filter 1.0
J-6080-808-A
J-6080-808-A
ND filter 0.4
J-6080-806-A
J-6080-806-A
ND filter 0.1
J-6080-807-A
J-6080-807-A
J-8
Flange back
adjustment jig
J-6082-563-A
adjustment jig
J-6082-563-A
J-15
Camera table
J-6082-384-A
J-6082-384-A
J-6
LANC cable
J-6082-442-A
J-6082-442-A
J-5
Adjustment remote
commander
(NEW LANC JIG)
J-6082-565-A
commander
(NEW LANC JIG)
J-6082-565-A
Note 1:
Personal computer
OS:
OS:
Windows 98/98SE/Me/2000/XP Home/XP Pro (Camera Section)
Windows 2000/XP Home/XP Pro (Drive Section)
Windows 2000/XP Home/XP Pro (Drive Section)
RAM: 256MB or more recommended
USB:
USB:
2.0 recommended (also compatible with 1.1)
Three connectors are required.
Three connectors are required.
Note 2:
The following programs and driver must already be installed in the personal computer. (Contact our service headquater of each
area how to get the programs and driver)
area how to get the programs and driver)
•
SeusCam
•
Optical power meter driver
•
AUDIT
1-2. List of service tools
•
Oscilloscope
•
Color monitor
•
Vectorscope
•
Frequency counter
•
Audio level meter
•
Audio generator
•
Audio attenuator
•
Audio distortion meter
Click on the first or last page to see other DCR-DVD105 (serv.man3) service manuals if exist.