Sony DCR-DVD105 (serv.man3) Service Manual ▷ View online
6-10
DCR-DVD105
•
Optical Power Meter and Driver Installation Procedure
Install method:
1) “ADCUSBDrvr120e.EXE” is double-clicked, and the self-ex-
1) “ADCUSBDrvr120e.EXE” is double-clicked, and the self-ex-
tractor is started.
2) Click OK.
3) “Setup.exe” is double-clicked, and the installer is started.
4) Click Next.
5) Click Agree.
6) Click Next.
7) Click Next.
8) Click Next.
6-11
DCR-DVD105
9) Click Next.
10) Click Close.
11) Select Start / All Programs / ADC Instruments USB Driver
1.2.0 / Installing WinDriver.
12) The following screen is opened, then it terminates by itself.
6-12
DCR-DVD105
6-1. CAMERA SECTION ADJUSTMENTS
1-1.
PREPARATIONS BEFORE ADJUSTMENTS (CAMERA SECTION)
1-1-1.
Preparations
Note:
Before perform the adjustment, check that the data of page:
0, address: 10 is “00”.
If not, select page: 0, address: 10, and set data “00”.
0, address: 10 is “00”.
If not, select page: 0, address: 10, and set data “00”.
1) Connect the equipment for adjustments according to Fig. 6-1-3.
Pattern box
Front of the lens
L = 1 m (PTB-450)
L = 40 cm (PTB-1450)
L = 40 cm (PTB-1450)
L
Camera
Fig. 6-1-2
Fig. 6-1-3
PC
(The SeusCam must be installed in the PC.)
OS: Windows 98/98SE/Me/2000/XP
RAM: 256MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
Three connectors are required.
RAM: 256MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
Three connectors are required.
HASP Key
USB cable
(1-829-579-61)
(1-829-579-61)
FP-339 flexible board
(1-867-583-21)
(1-867-583-21)
To DC IN jack
AC IN
AC adaptor
AC-L25A/L25B
(1-479-288-11)
AC-L25A/L25B
(1-479-288-11)
Audio R
Video
S-Video or
Video
Video
Color monitor
Vectorscope
Terminated
75
Ω
Video system Adjustment
Camera system Adjustment
Osilloscope
Terminated
75
75
Ω
Audio L
To A/V jack
Adjustment remote
commander
commander
RM-95
(J-6082-053-B)
(J-6082-053-B)
Multi cable
for service
(J-6082-535-A)
for service
(J-6082-535-A)
NEW LANC JIG
(J-6082-565-A)
LANC cable
(J-6082-442-A)
(J-6082-565-A)
LANC cable
(J-6082-442-A)
LANC
Note:
Before connecting the USB cable, set the following data by using the adjustment remote commander.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 14, set data: 01, and press the PAUSE (Write) button.
2) Select page: A, address: 14, set data: 01, and press the PAUSE (Write) button.
6-13
DCR-DVD105
H
A=B
C=D
A B
B
C
D
A
Enlargement
V
Electronic beam scanning frame
CRT picture frame
B
A
Difference in level
Y
ello
w
Cy
an
Green
White
Magenta
Red
Blue
Y
ello
w
Cy
an
Green
White
Magenta
Red
Blue
Color bar chart (Color reproduction adjustment frame)
Fig. a
(VIDEO terminal of A/V jack
output waveform)
(VIDEO terminal of A/V jack
output waveform)
Fig. b (monitor TV picture)
Adjust the camera zoom and direction to
obtain the output waveform shown in Fig. a and
the monitor TV display shown in Fig. b.
obtain the output waveform shown in Fig. a and
the monitor TV display shown in Fig. b.
1-1-2.
Precaution
1.
Setting the Switch
Unless otherwise specified, set the switches as follows and perform adjustments without inserting disc.
1.
POWER switch ............................................................ Movie
2.
BACK LIGHT ................................................................ OFF
3.
PROGRAM AE (MENU setting) ................................ AUTO
4.
EXPOSE (MENU setting) ........................................... AUTO
5.
WHITE BAL. (MENU setting) ................................... AUTO
6.
FOCUS (MENU setting) ............................................. AUTO
7.
COLOR SLOW S (MENU setting) ................................ OFF
8.
DIGITAL ZOOM (MENU setting) ................................ OFF
10. STEADY SHOT (MENU setting) .................................. OFF
11. DIGITAL EFFECT (MENU setting) ............................. OFF
12. PICTURE EFFECT (MENU setting) ............................ OFF
13. DEMO MODE (MENU setting) .................................... OFF
11. DIGITAL EFFECT (MENU setting) ............................. OFF
12. PICTURE EFFECT (MENU setting) ............................ OFF
13. DEMO MODE (MENU setting) .................................... OFF
Fig. 6-1-4
3.
Subjects
1) Color bar chart (Color reproduction adjustment frame)
When performing adjustments using the color bar chart, adjust
the picture frame as shown in Fig. 6-1-4. (Color reproduction
adjustment frame)
the picture frame as shown in Fig. 6-1-4. (Color reproduction
adjustment frame)
2) Clear chart (All whire frame)
Remove the color bar chart from pattern box and insert a clear
chart in its place. (Then adjust the zoom to TELE side from
WIDE side, and stop it when the black frame of the chart
disappears.)
chart in its place. (Then adjust the zoom to TELE side from
WIDE side, and stop it when the black frame of the chart
disappears.)
3) Chart for flange back adjustment
Join together a piece of white A0 size paper (1189mm
×
841
mm) and a piece of black paper to make the chart shown in
Fig. 6-1-5.
Fig. 6-1-5.
Note:
Use a non-reflecting and non-glazing vellum paper. The
size must be A0 or larger and the joint between the white
and black paper must not have any undulations.
size must be A0 or larger and the joint between the white
and black paper must not have any undulations.
Fig. 6-1-5
Black
White
841 mm
1189 mm
2.
Order of Adjustments
Basically carry out adjustments in the order given.
Click on the first or last page to see other DCR-DVD105 (serv.man3) service manuals if exist.