Sony DCR-DVD103 / DCR-DVD602 / DCR-DVD602E / DCR-DVD653 / DCR-DVD653E / DCR-DVD92 / DCR-DVD92E (serv.man4) Service Manual ▷ View online
6-1
DCR-DVD92/DVD92E/DVD103/DVD602/DVD602E/DVD653/DVD653E
SECTION 6
ADJUSTMENTS
1.
Before starting adjustments
EVR Data Re-writing Procedure When Replacing Board
The data that is stored in the repair board, is not necessarily correct.
Perform either procedure 1 or procedure 2 or procedure 3 when replacing board.
Procedure 1
Save the EVR data of the machine in which a board is going to be replaced. Download the saved data after a
board is replaced.
board is replaced.
Remove the EEPROM and install it.
(Former board)
(New board)
Procedure 2
Remove the EEPROM from the board of the machine that is going to be repaired. Install the removed
EEPROM to the replaced board.
EEPROM to the replaced board.
Procedure 3
When the data cannot be saved due to defective EEPROM, or when the EEPROM cannot be removed or
installed, save the data from the same model of the same destination, and download it.
installed, save the data from the same model of the same destination, and download it.
After the EVR data is saved and downloaded, check the
respective items of the EVR data.
(Refer to page 6-3 for the items to be checked)
respective items of the EVR data.
(Refer to page 6-3 for the items to be checked)
(Machine before starting repair)
(Machine after a board is replaced)
PC
PC
Save the EVR data
to a personal computer.
to a personal computer.
Download the saved
data to a machine.
data to a machine.
(Machine to be repaired)
(Machine to be repaired)
(The same model of the same destination)
Save the data.
Download the data.
PC
6-2
DCR-DVD92/DVD92E/DVD103/DVD602/DVD602E/DVD653/DVD653E
Table 6-1-1 (1)
1-1. Adjusting items when replacing main parts and boards
•
Adjusting items when replacing main parts
When replacing main parts, adjust the items indicated by z in the following table.
Note 1:
The Automatic Adjustment Program does not support.
Note 2:
DCR-DVD103/DVD653/DVD653E only
Lens device
Drive block
LCD block LCD901 (LCD panel)
LCD block LED901 (Back light)
EVF block LCD902 (LCD panel)
EVF block LED902 (Back light)
CD-563 board IC5002 (CCD imager )
CD-563 board IC5401, X5401 (Timing generator)
CD-563 board SE7103, 7104 (YAW, PITCH sensor)
PD-251 board IC6101 (LCD driver)
VC-395 board IC1201 (A/D conv.)
VC-395 board IC2101 (Video/Audio signal processor)
VC-395 board IC2201 (Video & Audio I/O, AGC, ACC)
VC-395 board IC3001 (EVR)
VF-166 board IC7001 (EVF driver)
Initialization of 9, A, B, D, 13,
15, 17, 1A, 1B, page data
Initialization of E, F, 19, 1E, 1F page data
Initialization of C, 1C page data
Input of board type data
15, 17, 1A, 1B, page data
Initialization of E, F, 19, 1E, 1F page data
Initialization of C, 1C page data
Input of board type data
(Note 1)
36MHz origin oscillation adj.
z
z
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
S VIDEO OUT chroma level adj.
CAMERA
adjustment 2
adjustment 2
Flange back adj.
z
z
CAMERA
adjustment 3
adjustment 3
Flange back check
z
z
(Note 1)
Optical axis adj.
z
z
F No. standard data input
Mechanical shutter adj
Color reproduction adj.
AWB standard data input
LV standard data input
Auto white balance adj.
MAX GAIN adj.
Mechanical shutter adj
Color reproduction adj.
AWB standard data input
LV standard data input
Auto white balance adj.
MAX GAIN adj.
CAMERA
adjustment 5
adjustment 5
Steady shot check
z
LCD/EVF automatic adj.
White balance adj. (EVF) (Note 2)
V-COM adj. (LCD)
Transmissive moed
white balance adj. (LCD)
Reflective mode
white balance adj. (LCD)
Touch panel adj. 1
Touch panel adj. 2
POWER adj.
White balance adj. (EVF) (Note 2)
V-COM adj. (LCD)
Transmissive moed
white balance adj. (LCD)
Reflective mode
white balance adj. (LCD)
Touch panel adj. 1
Touch panel adj. 2
POWER adj.
z
DVD-R adj.
z
DVD-RW adj.
z
DVD+RW adj.
z
z
z
z
AUDIT
Adjusting item
Adjustment
(Note 1)
VIDEO
adjustment
adjustment
CAMERA
adjustment 1
adjustment 1
HALL adj.
CAMERA
adjustment 4
adjustment 4
EVF/LCD
adjustment
adjustment
z
z
z
z
z
z
z
z
z
z
Parts replacement
Block replacement
Replaced parts
6-3
DCR-DVD92/DVD92E/DVD103/DVD602/DVD602E/DVD653/DVD653E
•
Adjusting items when replacing a board or EEPROM
When replacing a board or EEPROM, adjust the items indicated by z in the following table.
Table 6-1-1 (2)
Note 3:
IC2401 (Flash memory) on
the VC-395 board and
IC4403 (Flash memory) on
the MD-114/120 board can-
not be replaced.
the VC-395 board and
IC4403 (Flash memory) on
the MD-114/120 board can-
not be replaced.
CD-563 board (COMPLETE)
MD-114/120 board (COMPLETE)
PD-251 board (COMPLETE)
VC-395 board (COMPLETE)
VF-166 board (COMPLETE)
VC-395 board IC2002 (EEPROM)
VC-395 board IC2303 (EEPROM)
Initialization of 9, A, B, D, 13,
15, 17, 1A, 1B, page data
15, 17, 1A, 1B, page data
z
z
Initialization of E, F, 19, 1E, 1F page data
z
z
Initialization of C, 1C page data
z
z
Input of board type data
z
z
z
(Note 1)
36MHz origin oscillation adj.
z
z
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
S VIDEO OUT chroma level adj.
CAMERA
adjustment 2
adjustment 2
Flange back adj.
z
z
z
CAMERA
adjustment 3
adjustment 3
Flange back check
z
z
z
(Note 1)
Optical axis adj.
z
z
z
F No. standard data input
Mechanical shutter adj
Color reproduction adj.
AWB standard data input
LV standard data input
Auto white balance adj.
MAX GAIN adj.
Mechanical shutter adj
Color reproduction adj.
AWB standard data input
LV standard data input
Auto white balance adj.
MAX GAIN adj.
CAMERA
adjustment 5
adjustment 5
Steady shot check
z
z
LCD/EVF automatic adj.
White balance adj. (EVF) (Note 2)
V-COM adj. (LCD)
Transmissive moed
white balance adj. (LCD)
Reflective mode
white balance adj. (LCD)
Touch panel adj. 1
Touch panel adj. 2
POWER adj.
White balance adj. (EVF) (Note 2)
V-COM adj. (LCD)
Transmissive moed
white balance adj. (LCD)
Reflective mode
white balance adj. (LCD)
Touch panel adj. 1
Touch panel adj. 2
POWER adj.
z
DVD-R adj.
z
DVD-RW adj.
z
DVD+RW adj.
z
z
z
z
z
z
z
z
z
z
z
CAMERA
adjustment 4
adjustment 4
EVF/LCD
adjustment
adjustment
AUDIT
CAMERA
adjustment 1
adjustment 1
(Note 1)
Adjusting item
Adjustment
VIDEO
adjustment
adjustment
EEPROM
replacement
Board
replacement
HALL adj.
z
z
6-4
DCR-DVD92/DVD92E/DVD103/DVD602/DVD602E/DVD653/DVD653E
6-1. CAMERA SECTION ADJUSTMENTS
1-1.
PREPARATIONS BEFORE ADJUSTMENTS (CAMERA SECTION)
1-1-1.
List of Service Tools
•
Oscilloscope
•
Color monitor
•
Vectorscope
•
AC power adapter
•
Frequency counter
Personal computer
(Note)
(Note)
J-1
HASP key and application
for adjustment (SeusCam)
for adjustment (SeusCam)
Contact our service headquater of each area
how to get the application for adjustment
(SeusCam) and HASP key.
how to get the application for adjustment
(SeusCam) and HASP key.
J-2
USB cable
1-829-868-41
1-829-868-41
J-3
J-4
Adjustment remote
commander
J-6082-053-B
commander
J-6082-053-B
J-11
J-7
J-5
Pattern box PTB-450
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-8
Color bar chart
For PTB-450:
J-6020-250-A
J-6020-250-A
For PTB-1450:
J-6082-559-A
J-6082-559-A
J-9
Clear chart
For PTB-450:
J-6080-621-A
J-6080-621-A
For PTB-1450:
J-6082-560-A
J-6082-560-A
J-10
Minipattern box
J-6082-353-B
J-6082-353-B
Siemens star chart
J-6080-875-A
J-6080-875-A
Filter for color
temperature correction
(C14)
J-6080-058-A
temperature correction
(C14)
J-6080-058-A
J-12
ND filter 1.0
J-6080-808-A
J-6080-808-A
ND filter 0.4
J-6080-806-A
J-6080-806-A
ND filter 0.1
J-6080-807-A
J-6080-807-A
J-6
Flange back
adjustment jig
J-6082-563-A
adjustment jig
J-6082-563-A
J-13
Camera table
J-6082-384-A
J-6082-384-A
CPC-8 jig
J-6082-388-A
J-6082-388-A
J-14
Extension cable
(10P)
J-6082-572-A
(10P)
J-6082-572-A
J-15
Extension cable
(100P)
J-6082-352-A
(100P)
J-6082-352-A
J-16
Fig. 6-1-1
Note:
Personal computer
OS:
OS:
Windows98/98SE/Me/2000/XP Home/XP Pro
RAM: 256MB or more recommended
USB:
USB:
2.0 recommended (also compatible with 1.1)
Two connectors are required.
Two connectors are required.
Click on the first or last page to see other DCR-DVD103 / DCR-DVD602 / DCR-DVD602E / DCR-DVD653 / DCR-DVD653E / DCR-DVD92 / DCR-DVD92E (serv.man4) service manuals if exist.