Sony DCR-DVD103 / DCR-DVD602 / DCR-DVD602E / DCR-DVD653 / DCR-DVD653E / DCR-DVD92 / DCR-DVD92E (serv.man4) Service Manual ▷ View online
6-17
DCR-DVD92/DVD92E/DVD103/DVD602/DVD602E/DVD653/DVD653E
1-3.
ADJUSTMENT PROGRAM
The DCR-DVD92/DVD92E/DVD103/DVD602/DVD602E/
DVD653/DVD653E are adjusted by the Automatic Adjustment Pro-
gram. The Automatic Adjustment Program enters automatically
via the SeusCam the adjustment operations that were formerly
entered manually by the adjustment remote commander (some
items may be adjusted by manual operation on the operation screen
of the SeusCam).
DVD653/DVD653E are adjusted by the Automatic Adjustment Pro-
gram. The Automatic Adjustment Program enters automatically
via the SeusCam the adjustment operations that were formerly
entered manually by the adjustment remote commander (some
items may be adjusted by manual operation on the operation screen
of the SeusCam).
1.
Precautions When Using Automatic Adjustment
Program
Program
1) The Automatic Adjustment Program writes the adjustment re-
sults such as EVR data to the set through two-way communi-
cation with the camera via the SeusCam. Accordingly, the Au-
tomatic Adjustment Program must be used in the environment
where the SeusCam operates.
cation with the camera via the SeusCam. Accordingly, the Au-
tomatic Adjustment Program must be used in the environment
where the SeusCam operates.
2) The Automatic Adjustment Program cannot be used when the
SEUS (digital camera adjustment software) is running. Exit
the SEUS before using the Automatic Adjustment Program.
the SEUS before using the Automatic Adjustment Program.
3) The SeusCam must be already started on the PC when using
the Automatic Adjustment Program. With the SeusCam not
started, some adjustment items will take time in adjustment.
started, some adjustment items will take time in adjustment.
4) The program run time may vary depending on the environ-
ment of the personal computer used.
Note:
Before using the Automatic Adjustment Program, set the
following data using the adjustment remote commander.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 14, set data: 01, and press the
following data using the adjustment remote commander.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 14, set data: 01, and press the
PAUSE button.
These settings are released if the
[END]
button is clicked
on the Main Menu screen of the Automatic Adjustment Pro-
gram.
gram.
2.
Start of Automatic Adjustment Program
Double-click the application file (DCR-DVD92 Series Auto-Adj
Ver_1.
Ver_1.
[]
r
[][]
.exe), and the Automatic Adjustment Program will start.
Note:
[]
(numeric value) of the file name varies depending on the
version of Automatic Adjustment Program.
3.
Function of Each Button on Main Menu Screen
When the Automatic Adjustment Program started, the Main Menu
screen in Fig. 6-1-6 will appear. On this screen, select each adjust-
ment section.
screen in Fig. 6-1-6 will appear. On this screen, select each adjust-
ment section.
6
4
3
2
1
5
7
Fig. 6-1-6
1
[Connecting the Equipment]
button
A connection diagram of the equipment is displayed.
2
[VIDEO SYSTEM ADJUSTMENT]
button
The “VIDEO SYSTEM ADJUSTMENT” screen appears.
3
[CAMERA SYSTEM ADJUSTMENT]
button
The “CAMERA SYSTEM ADJUSTMENT” screen appears.
4
[LCD SYSTEM ADJUSTMENT]
button
The “LCD SYSTEM ADJUSTMENT” screen appears.
5
[Initializing of Flash Back Up]
button
The “Initializing of Flash Back Up” screen appears.
6
[END]
button
The Automatic Adjustment Program finishes.
At this time, the data set by the adjustment remote commander
are released.
If the data are not released with the
At this time, the data set by the adjustment remote commander
are released.
If the data are not released with the
[END]
button, release them
through the following procedure using the adjustment remote
commander.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 14, set data: 00, and press the
commander.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 14, set data: 00, and press the
PAUSE button.
3) Select page: 0, address: 01, and set data: 00.
7
This part indicates the version of Automatic Adjustment Pro-
gram.
gram.
6-18
DCR-DVD92/DVD92E/DVD103/DVD602/DVD602E/DVD653/DVD653E
4.
Initializing of Flash Back Up
Click the
[Initializing of Flash Back Up]
button on the Main Menu
screen, and the “Initializing of Flash Back Up” screen in Fig. 6-1-
7 will appear.
7 will appear.
Fig. 6-1-7
[Initializing method]
1) Click the
1) Click the
[Initializing Start]
button.
2) The initialization finishes when the following message is dis-
played.
6-19
DCR-DVD92/DVD92E/DVD103/DVD602/DVD602E/DVD653/DVD653E
1-4.
VIDEO SYSTEM ADJUSTMENTS
1.
Function of Each Button on Video System
Adjustment Screen
Adjustment Screen
Click the
[VIDEO SYSTEM ADJUSTMENT]
button on the Main
Menu screen, and the “VIDEO SYSTEM ADJUSTMENT” screen
in Fig. 6-1-8 will appear.
in Fig. 6-1-8 will appear.
Fig. 6-1-8
1
[To Menu]
button
The Main Menu screen comes back.
2
[Preparation]
button
Notes for adjustment or jigs used are displayed.
3
[Start]
button
“Video Adjustment” starts.
4
[Release Data Setting]
button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the video adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the video adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
2.
Adjustment Items of VIDEO System Adjustment
The adjustment items of video system adjustment are as listed in
Table 6-1-2. The Automatic Adjustment Program executes the ad-
justment items if the VIDEO Adjustment Start button is clicked.
Table 6-1-2. The Automatic Adjustment Program executes the ad-
justment items if the VIDEO Adjustment Start button is clicked.
4
3
2
1
Button
Name
Adjustment
Measurement Point
Measuring
Instrument
Adjustment
Page
Adjustment
Address
(Note)
36 MHz Origin
Oscillation Adj.
Oscillation Adj.
Frequency
counter
counter
0F
10
S VIDEO OUT Y
Level Adj.
Level Adj.
Y signal terminal of S VIDEO plug of
A/V jack (75 ohm terminated)
A/V jack (75 ohm terminated)
R2150 (Pin <zc. of IC2101 (SPCK)) on
VC-395 board
VC-395 board
Oscilloscope
0C
25
S VIDEO OUT
Chroma Level Adj.
Chroma Level Adj.
Chroma signal terminal of S VIDEO
plug of A/V jack (75 ohm terminated)
plug of A/V jack (75 ohm terminated)
Oscilloscope
0C
26, 27
–
–
VIDEO OUT Level
Check
Check
VIDEO terminal of A/V jack (75 ohm
terminated)
terminated)
Oscilloscope
VIDEO
Adjustment
Adjustment
Note:
The Automatic Adjustment Program does not support.
Table 6-1-2
6-20
DCR-DVD92/DVD92E/DVD103/DVD602/DVD602E/DVD653/DVD653E
4.
VIDEO Adjustment
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Video Adj.
2. S VIDEO OUT Y Level Adj.
3. S VIDEO OUT Chroma Level Adj.
4. VIDEO OUT Level Check
5. Release of Data Setting during Video Adj.
sequence]
1. Data Setting during Video Adj.
2. S VIDEO OUT Y Level Adj.
3. S VIDEO OUT Chroma Level Adj.
4. VIDEO OUT Level Check
5. Release of Data Setting during Video Adj.
[Adjusting method]
1) Click the
1) Click the
[Start]
button of the VIDEO Adjustment.
2) The Automatic Adjustment Program executes the “1. Data
Setting during Video Adj.”.
3) If “1. Data Setting during Video Adj.” completed successfully,
the following screen is displayed during the execution of “2. S
VIDEO OUT Y Level Adj.”. Using the
VIDEO OUT Y Level Adj.”. Using the
[Up]
/
[Down]
button
on the screen, adjust so that the Y signal level satisfies the
specified value.
specified value.
3.
36 MHz Origin Oscillation Adjustment
Set the frequency of the clock for synchronization.
If deviated, the synchronization will be disrupted and the color
will become inconsistent.
If deviated, the synchronization will be disrupted and the color
will become inconsistent.
Subject
Not required
Measurement Point
R2150 (Pin <zc. of IC2101 (SPCK))
on VC-395 board
on VC-395 board
Measuring Instrument
Frequency counter
Adjustment Page
F
Adjustment Address
10
Specified value
f = 13500000
±
68 Hz
Switch setting
1) POWER ............................................................. MOVIE mode
1) POWER ............................................................. MOVIE mode
Adjusting method:
Order Page Address Data
Procedure
1
0
01
01
2
F
10
Change the data and set the
frequency (f) to the specified
value.
frequency (f) to the specified
value.
3
F
10
Press PAUSE button.
4
0
01
00
Fig. 6-1-9
IC2101
IC2901
R2150
VC-395 board (SIDE A)
Click on the first or last page to see other DCR-DVD103 / DCR-DVD602 / DCR-DVD602E / DCR-DVD653 / DCR-DVD653E / DCR-DVD92 / DCR-DVD92E (serv.man4) service manuals if exist.