DOWNLOAD Sony CCD-TR820E / CCD-TR825E / CCD-TR920E / CCD-TR930 Service Manual ↓ Size: 2.71 MB | Pages: 127 in PDF or view online for FREE

•

Oscilloscope

•

Adjusting driver

Refer to page 2 as Table for distinction

functions of models and classification

•

Color monitor

•

Regulated power supply

•

Vectorscope

•

Digital voltmeter

J-1

J-2

J-3

J-4

J-5

J-6

J-7

J-8

J-9

J-10

J-11

J-12

Filter for color temperature correction

(C14)

ND filter 1.0

ND filter 0.3

Pattern box PTB-450

Color chart for pattern box

Adjusting remote commander

(RM-95-remodeled partly)Note 1

Siemens star

CPC-7 jig

Power code

AFM DEV jig

Clear chart

Extension cable (16P, 0.5 mm)

IR receiver jig

J-6080-058-A

J-6080-808-A

J-6080-818-A

J-6082-200-A

J-6020-250-A

J-6082-053-B

J-6080-875-A

J-6082-382-A

J-6082-223-A

J-6082-312-A

J-6080-621-A

J-6082-357-A

J-6082-383-A

Auto white balance adjustment/check

White balance adjustment/check

White balance check

White balance check

For checking the flange back

For the color viewfinder adjustment

For adjusting the video section

For connecting the battery terminal and DC power supply

For adjusting the deviation

For extension between the CD-166 board (CN401) and

VC-190 board (CN112)

For adjusting the IR transmitter

Note 1: If the micro processor IC in the adjusting remote

c om man der  i s  not  t he  new  mi c ro pr oc e s s or
(UPD7503G-C56-12), the pages cannot be switched.
In this case, replace with the new micro processor
(8-759-148-35).

J-1

J-2

J-3

J-4

J-5

J-11

J-12

J-7

J-6

J-8

J-9

J-10

Note 1: Refer to “Section 2 DISASSEMBLY” for details of

how to remove the cabinet and boards.

Note 2: If performing only adjustments, the lens block and

VC-190 board need not be adjusted.

1)

Connect the adjusting equipment according to Fig. 5-1-3.

2)

T he  f ro n t  p a n e l  blo ck  (MI-29  b oa rd ) need n ot  b e
connected.
To remove, disconnect the following connector.

1.

CN303 (26P, 0.5 mm) of MI-29 board

3)

The accessory shoe need not be connected.
To remove, disconnect the following connector.

1.

CN205 of VC-190 board (10P, 0.5 mm)
(CCD-TR930/TR825E/TR930E)

4.

The viewfinders (VF-111, 112 boards (COLOR EVF
model), VF-99 board (B/W EVF model) need not be
co n n ec ted .  To   re m ove ,  di sco nn ec t  t he  fol l owi ng
connector.

1.

CN111 of VC-190 board (20P, 0.5 mm)

5)

By setting the “forced power supply ON mode”, the camera
power supply can be turned ON even if the cabinet (R)
(power switch, Control switch block) has been removed.
When removing the cabinet (R), disconnect the following
connector. However, as removing CN1953 means removing
the lithium 3V power supply, data such as date, time, user-set
menus will be lost. After adjustments, reset these data. If
CN1953 has been removed, the self-diagnosis data, data on
history of use (total drum rotation time, date of when the user
first turned the power ON, and the date of when
condensation occurred the last time) will be lost. Before
removing, note down the self-diagnosis data and data of
page:3, address:E0 to E9. (Refer to the “Service Mode”  of
“VIDEO SECTION ADJUSTMENT” for the data on the
history of use.)

1.

CN1953 of VC-190 board (28P, 0.5 mm)

After the adjustments, be sure to exit the “forced camera
power supply ON mode”.

Note 3: Setting the “forced camera power supply ON mode”

1) Set data: 01 to page: 0, address: 01.
2) Set data: 21 to page: D, address: 10, and press

th e   PAUSE  bu tt o n  of  t he  a dj usti ng  rem ot e
commander.

The camera power supply can be turned ON even if the cabinet
(R) has been removed using the above steps. After completing
adjustments, be sure to exit the “forced Camera power supply
ON mode”.
Note 4: Exiting the “forced camera power supply ON mode”

1) Set data: 01 to page: 0, address: 01.
2) Set data: 00 to page: D, address: 10, and press

th e   PAUSE  bu tt o n  of  t he  a dj usti ng  rem ot e
commander.

3) Set data: 00 to page: 0, address: 01.

Front of lens

1.5m

Pattern box

Color monitor

Vector scope

Must be connected when performing the video
or color viewfinder system adjustments

Control switch block
(CF) CN001

Regulated power supply

(8.4

±

0.1 Vdc)

DD-95 board
CN501

VF-111 board CN851
(COLOR EVF MODEL)
VF-99 board CN901
(B/W EVF MODEL)

Terminal at 75

Ω

Lens block

Zoom motor

Focus motor

CD-166 board
CN401

Adjusting

remote commander

LANC terminal

MM-35
board

Battery
terminal

PJ-80 board
CN102

CPC-7 jig
(J-6082-382-A)

VIDEO terminal

Iris meter

Extension

Cable (16P)

(J-6082-357-A)

CN205 CN113

CN1951

CN200

CN104

CN101

CN1953

VC-190 board

CN1350

CN207

(Refer to Page 4 for
Power Supply During Repairs)