Sony CCD-TR317E / CCD-TR417E / CCD-TR427E / CCD-TR617E / CCD-TR717E / CCD-TR918E / CCD-TRV37E / CCD-TRV47E / CCD-TRV48E / CCD-TRV57E / CCD-TRV67E / CCD-TRV87E Service Manual ▷ View online
5-2
Lens de
vice
Mechanism deck
LCD block (*1)
LCD901 (LCD panel)
LCD block (*1)
ND901 (Fluorescent tube)
B/W EVF block
V901 (Picture tube)
Mechanism deck
M901 (Drum assy)
Mechanism deck
M902 (Capstan motor)
CD-239/240 board
IC201 (CCD imager)
PD-117 board (*1)
IC5501 (RGB decoder (LCD))
PD-117 board (*1)
IC5502 (T
iming g
enera
tor (LCD))
SE-100/101 board (*3)
SE451,452 (PITCH,Y
A
W
sensor)
VC-234 board
IC501, X501 (T
iming g
ener
ator )
VC-234 board
IC502 (S/H,
A
GC,
A/D con
v
.)
VC-234 board
IC201 (Y
, C pr
ocess)
VC-234 board
IC205 (VCO)
VC-234 board
IC641 (Y
, C IN/OUT)
VC-234 board
IC101 (REC/PB
AMP)
VC-234 board (*4)
IC751 (IR transmitter)
VC-234 board
IC701 (AFM
Audio pr
ocess)
VF-129 board
IC901 (CR
T dri
v
er)
VF-129 board
T901 (FBT)
Replaced parts
Block replacement
Parts replacement
z
z
z
z
z
z
z
z
z
z
z
z z
z
z z
z
z z
z
z z
z
z z
z
z z
z
z
z
z
z
z
z z
z
z
z
z
z
z
z z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z z
Adjustment
Section
Initialization of D,
E, F, 7 page data
E, F, 7 page data
Camera
B/W EVF
LCD
(*1)
Servo
Video
IR (*4)
Audio
Mechanism
Adjustment
Initialization of D, E, F, 7 page data
Hall adj.
Flange back adj.
Color reproduction adj.
AWB & LV standard data input
Auto white balance adj.
Steady shot check (*3)
Centering adj.
Focus adj.
Aberration adj.
Horizontal amplitude adj.
Vertical amplitude adj.
Brightness adj.
LCD Initial data input
VCO adj.
RGB AMP adj.
Contrast adj.
COM AMP adj.
V-COM adj.
White balance adj.
CAP FG offset adj.
Switching position adj.
28MHz origin oscillation adj.
AFC f
0
adj.
Filter f
0
adj.
Y OUT level adj.
C OUT level adj.
REC Y current adj.
REC C/AFM current adj.
IR video carrier frequency adj.
IR video deviation adj.
IR audio deviation adj.
1.5MHz deviation adj.
1.7MHz deviation adj. (*2)
BPF f
0
adj.
Tape path adj.
1-1.
Adjusting items when replacing main parts and boards.
• Adjusting items when replacing main parts
When replacing main parts, adjust the items indicated by
z
in the following table.
Table. 5-1-1(1).
5-3
SE-100/101 board (*3)
(COMPLETE)
VC-234 board
(COMPLETE )
PD-117 board (*1)
(COMPLETE)
VF-129 board
(COMPLETE)
VC-234 board
IC901 (EEPR
OM )
Replaced parts
Board
replacement
z
z
z
z
z
z
z
z
z
z
z
z z
z
z
z
z
z
z
z
z
z
z z
z
z z
z
z z
z
z z
z
z z
z
z z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
• Adjusting items when replacing a board or EEPROM
When replacing a board or EEPROM, adjust the items indicated by
z
in the following table.
Table. 5-1-1(2).
*1: TRV model (CCD-TRV37E/TRV47E/TRV48E/TRV57E/
TRV67E/TRV87E) only.
*2: STEREO model (CCD-TR918E/TRV87E) only.
*3: STEADY SHOT model (CCD-TR617E/TR717E/TR918E/
*3: STEADY SHOT model (CCD-TR617E/TR717E/TR918E/
TRV57E/TRV67E/TRV87E) only.
*4: LASER LINK model (CCD-TR918E/TRV87E) only.
Adjustment
Section
Initialization of D,
E, F, 7 page data
E, F, 7 page data
Camera
B/W EVF
LCD
(*1)
Servo
Video
IR (*4)
Audio
Mechanism
Adjustment
Initialization of D, E, F, 7 page data
Hall adj.
Flange back adj.
Color reproduction adj.
AWB & LV standard data input
Auto white balance adj.
Steady shot check (*3)
Centering adj.
Focus adj.
Aberration adj.
Horizontal amplitude adj.
Vertical amplitude adj.
Brightness adj.
LCD Initial data input
VCO adj.
RGB AMP adj.
Contrast adj.
COM AMP adj.
V-COM adj.
White balance adj.
CAP FG offset adj.
Switching position adj.
28MHz origin oscillation adj.
AFC f
0
adj.
Filter f
0
adj.
Y OUT level adj.
C OUT level adj.
REC Y current adj.
REC C/AFM current adj.
IR video carrier frequency adj.
IR video deviation adj.
IR audio deviation adj.
1.5MHz deviation adj.
1.7MHz deviation adj. (*2)
BPF f
0
adj.
Tape path adj.
5-4
5-1. CAMERA SECTION ADJUSTMENT
1-1.
PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)
1-1-1.
List of Service Tools
• Oscilloscope
• Color monitor
• Vectorscope
• Regulated power supply
• Digital voltmeter
Note1:
If the micro processor IC in the adjustment remote commander is
not the new micro processor (UPD7503G-C56-12), the pages
cannot be switched. In this case, replace with the new micro
processor (8-759-148-35).
not the new micro processor (UPD7503G-C56-12), the pages
cannot be switched. In this case, replace with the new micro
processor (8-759-148-35).
Note2:
Connect the adjustment remote commander to the LANC jack,
and set to HOLD switch to the “ADJ” side.
and set to HOLD switch to the “ADJ” side.
Ref. No.
J-1
J-2
J-3
J-4
J-5
J-6
J-7
J-8
J-9
J-10
J-11
J-12
J-13
J-14
Name
Filter for color temperature correction (C14)
ND filter 1.0
ND filter 0.4
ND filter 0.1
Pattern box PTB-450
Color chart for pattern box
Adjustment remote commander (RM-95 upgraded)
(Note1)
(Note1)
Siemens star chart
Clear chart for pattern box
Multi CPC jig
CPC-7 jig
Power code (Note2)
AFM DEV jig
IR receiver jig
Mini pattern box
Camera table
Parts Code
J-6080-058-A
J-6080-808-A
J-6080-806-A
J-6080-807-A
J-6082-200-A
J-6020-250-A
J-6082-053-B
J-6080-875-A
J-6080-621-A
J-6082-311-A
J-6082-382-A
J-6082-223-A
J-6082-312-A
J-6082-383-A
J-6082-353-B
J-6082-384-A
Usage
Auto white balance adjustment/check
White balance adjustment/check
White balance adjustment/check
White balance check
White balance check
White balance check
For checking the flange back
For adjusting the LCD block
For adjusting the video section
For connecting the battery terminal and DC power supply
For adjusting the deviation
For adjusting the IR transmitter
For adjusting the flange back
For adjusting the flange back
J-1
J-2
J-6
J-3
J-7
J-8
J-4
J-5
Fig. 5-1-1.
J-9
J-10
J-11
J-12
J-13
J-14
5-5
1-1-2.
Preparations
Note1:
For details of how remove the cabinet and boards, refer to “2.
DISASSEMBLY”.
DISASSEMBLY”.
Note2:
When performing only the adjustments, the lens block and boards
need not be disassembled.
need not be disassembled.
Note3:
TR model / TRV model
TR model: CCD-TR317E/TR417E/TR427E/TR617E/TR717E/
TR model: CCD-TR317E/TR417E/TR427E/TR617E/TR717E/
TR918E
TRV model: CCD- TRV37E/TRV47E/TRV48E/TRV57E/
TRV67E/TRV87E
1)
Connect the equipment for adjustments according to Fig. 5-1-3,
5-1-4.
5-1-4.
2)
By setting the “Forced Camera Power ON mode”, the camera
power can be turned ON even if the front panel block (MA-
374/375 board, power switch, microphone unit) has been
removed. When removing the front panel block, disconnect
the following connector.
power can be turned ON even if the front panel block (MA-
374/375 board, power switch, microphone unit) has been
removed. When removing the front panel block, disconnect
the following connector.
1. VC-234 board CN972 (20P 0.5mm)
Note4:
As removing the cabinet (R) (removing the VC-234 board CN975)
means removing the lithium 3V power supply (CF-66/67 board
BH001), data such as date, time, user-set menus will be lost. After
completing adjustments, reset these data. If the cabinet (R) has
been removed, the self-diagnosis data, data on history of use (total
drum rotation time etc. ) will be lost. Before removing, note down
the self-diagnosis data and data on history use (data of page: 2,
address: A2 to AA). (Refer to “SELF-DIAGNOSIS FUNCTION”
for the self-diagnosis data, and refer to “5-4. Service Mode” for
the data on the history use.)
means removing the lithium 3V power supply (CF-66/67 board
BH001), data such as date, time, user-set menus will be lost. After
completing adjustments, reset these data. If the cabinet (R) has
been removed, the self-diagnosis data, data on history of use (total
drum rotation time etc. ) will be lost. Before removing, note down
the self-diagnosis data and data on history use (data of page: 2,
address: A2 to AA). (Refer to “SELF-DIAGNOSIS FUNCTION”
for the self-diagnosis data, and refer to “5-4. Service Mode” for
the data on the history use.)
Note5:
Setting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the PAUSE
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the PAUSE
button of the adjustment remote commander.
The above procedure will enable the camera power to be turned
on with the front panel block removed. After completing
adjustments, be sure to exit the “Forced Camera Power ON
Mode”.
The above procedure will enable the camera power to be turned
on with the front panel block removed. After completing
adjustments, be sure to exit the “Forced Camera Power ON
Mode”.
Note6:
Exiting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the PAUSE
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the PAUSE
button of the adjustment remote commander.
3) Select page: 0, address: 01, and set data: 00.
Front of the lens
1.5 m
Pattern box
Fig. 5-1-2.
Click on the first or last page to see other CCD-TR317E / CCD-TR417E / CCD-TR427E / CCD-TR617E / CCD-TR717E / CCD-TR918E / CCD-TRV37E / CCD-TRV47E / CCD-TRV48E / CCD-TRV57E / CCD-TRV67E / CCD-TRV87E service manuals if exist.