Sony CPD-210EST / CPD-210GS Service Manual ▷ View online
1-1
SECTION 1
GENERAL
The operating instructions mentioned here are partial abstracts
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remein as in the manual.
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remein as in the manual.
4
Precautions
Warning on power connections
• Use the supplied power cord. If you use a different power cord,
be sure that it is compatible with your local power supply.
For the customers in the U.S.A.
If you do not use the appropriate cord, this monitor will not
conform to mandatory FCC standards.
conform to mandatory FCC standards.
• Before disconnecting the power cord, wait at least 30 seconds
after turning off the power to allow the static electricity on the
screen’s surface to discharge.
screen’s surface to discharge.
• After the power is turned on, the screen is demagnetized
(degaussed) for about 5 seconds. This generates a strong
magnetic field around the screen which may affect data stored
on magnetic tapes and disks placed near the monitor. Be sure to
keep magnetic recording equipment, tapes, and disks away
from the monitor.
magnetic field around the screen which may affect data stored
on magnetic tapes and disks placed near the monitor. Be sure to
keep magnetic recording equipment, tapes, and disks away
from the monitor.
Installation
Do not install the monitor in the following places:
• on surfaces (rugs, blankets, etc.) or near materials (curtains,
• on surfaces (rugs, blankets, etc.) or near materials (curtains,
draperies, etc.) that may block the ventilation holes
• near heat sources such as radiators or air ducts, or in a place
subject to direct sunlight
• in a place subject to severe temperature changes
• in a place subject to mechanical vibration or shock
• on an unstable surface
• near equipment which generates magnetism, such as a
• in a place subject to mechanical vibration or shock
• on an unstable surface
• near equipment which generates magnetism, such as a
transformer or high voltage power lines
• near or on an electrically charged metal surface
Maintenance
• Clean the screen with a soft cloth. If you use a glass cleaning
liquid, do not use any type of cleaner containing an anti-static
solution or similar additive as this may scratch the screen’s
coating.
solution or similar additive as this may scratch the screen’s
coating.
• Do not rub, touch, or tap the surface of the screen with sharp or
abrasive items such as a ballpoint pen or screwdriver. This type
of contact may result in a scratched picture tube.
of contact may result in a scratched picture tube.
• Clean the cabinet, panel and controls with a soft cloth lightly
moistened with a mild detergent solution. Do not use any type
of abrasive pad, scouring powder or solvent, such as alcohol or
benzene.
of abrasive pad, scouring powder or solvent, such as alcohol or
benzene.
Transportation
When you transport this monitor for repair or shipment, use the
original carton and packing materials.
original carton and packing materials.
Use of the tilt-swivel
This monitor can be adjusted within the angles shown below. To
turn the monitor vertically or horizontally, hold it at the bottom
with both hands.
turn the monitor vertically or horizontally, hold it at the bottom
with both hands.
The equipment should be installed near an easily accessible
outlet.
outlet.
Example of plug types
for 100 to 120 V AC
for 200 to 240 V AC
90˚
5˚
90˚
15˚
5
US
Identifying parts and controls
See the pages in parentheses for further details.
1
MENU button (page 9)
This button displays the MENU OSD.
2
ENTER button (page 9)
This button selects the menu and adjustment items.
3
6
(contrast)
+/−
buttons (page 9)
These buttons display the CONTRAST/BRIGHTNESS menu
and function as the
and function as the
+
/
−
buttons when adjusting other items.
4
1
(power) switch and indicator (pages 6, 13, 16)
This button turns the monitor on and off. The power indicator
lights up in green when the monitor is turned on, and either
flashes in green and orange, or lights up in orange when the
monitor is in power saving mode.
lights up in green when the monitor is turned on, and either
flashes in green and orange, or lights up in orange when the
monitor is in power saving mode.
5
AC IN connector (page 6)
This connector provides AC power to the monitor.
6
Video input connector (HD15) (page 6)
This connector inputs RGB video signals (0.700 Vp-p,
positive) and sync signals.
positive) and sync signals.
* DDC (Display Data Channel) is a standard of VESA.
MENU
ENTER
Rear
Front
Pin No.
Signal
1
Red
2
Green
3
Blue
4
ID (Ground)
5
DDC Ground*
6
Red Ground
7
Green Ground
8
Blue Ground
9
–
10
Ground
11
ID (Ground)
12
Bi-Directional Data (SDA)*
13
H. Sync
14
V. Sync
15
Data Clock (SCL)*
1 2
3 4 5
8
7
6
11 12 13 14 15
10
9
1-2
6
Setup
Before using your monitor, check that the following accessories
are included in your carton:
• Power cord (1)
• Windows Monitor Information Disk (1)
• Warranty card (1)
• Notes on cleaning the screen’s surface (1)
• This instruction manual (1)
are included in your carton:
• Power cord (1)
• Windows Monitor Information Disk (1)
• Warranty card (1)
• Notes on cleaning the screen’s surface (1)
• This instruction manual (1)
Step 1: Connect your monitor to
your computer
Turn off the monitor and computer before connecting.
x
Connecting to an IBM PC/AT or compatible
computer
computer
x
Connecting to a Macintosh or compatible
computer
computer
Step 2: Connect the power cord
With the monitor and computer switched off, first connect the
power cord to the monitor, then connect it to a power outlet.
power cord to the monitor, then connect it to a power outlet.
Step 3: Turn on the monitor and
computer
First turn on the monitor, then turn on the computer.
The installation of your monitor is complete.
If necessary, use the monitor’s controls to adjust the picture.
If necessary, use the monitor’s controls to adjust the picture.
to video output
IBM PC/AT or
compatible computer
compatible computer
You will need a Macintosh adapter (not supplied).
Macintosh or
compatible computer
compatible computer
to video
output
output
Macintosh adapter
(not supplied)
(not supplied)
to AC IN
to a power outlet
power cord (supplied)
7
US
If no picture appears on your screen
• Check that the monitor is correctly connected to the computer.
• If NO INPUT SIGNAL appears on the screen, confirm that
• If NO INPUT SIGNAL appears on the screen, confirm that
your computer’s graphic board is completely seated in the
correct bus slot.
correct bus slot.
• If you are replacing an old monitor with this model and OUT
OF SCAN RANGE appears on the screen, reconnect the old
monitor. Then adjust the computer’s graphic board so that the
horizontal frequency is between 30 – 70 kHz, and the vertical
frequency is between 48 – 120 Hz.
monitor. Then adjust the computer’s graphic board so that the
horizontal frequency is between 30 – 70 kHz, and the vertical
frequency is between 48 – 120 Hz.
For more information about the on-screen messages, see “Trouble
symptoms and remedies” on page 14.
symptoms and remedies” on page 14.
For customers using Windows 95/98
To maximize the potential of your monitor, install the new model
information file from the supplied Windows Monitor Information Disk
onto your PC.
This monitor complies with the “VESA DDC” Plug & Play standard. If
your PC/graphics board complies with DDC, select “Plug & Play Monitor
(VESA DDC)” or this monitor’s model name as the monitor type in the
“Control Panel” of Windows 95/98. If your PC/graphics board has
difficulty communicating with this monitor, load the Windows Monitor
Information Disk and select this monitor’s model name as the monitor
type.
information file from the supplied Windows Monitor Information Disk
onto your PC.
This monitor complies with the “VESA DDC” Plug & Play standard. If
your PC/graphics board complies with DDC, select “Plug & Play Monitor
(VESA DDC)” or this monitor’s model name as the monitor type in the
“Control Panel” of Windows 95/98. If your PC/graphics board has
difficulty communicating with this monitor, load the Windows Monitor
Information Disk and select this monitor’s model name as the monitor
type.
For customers using Windows NT4.0
Monitor setup in Windows NT4.0 is different from Windows 95/98 and
does not involve the selection of monitor type. Refer to the Windows
NT4.0 instruction manual for further details on adjusting the resolution,
refresh rate, and number of colors.
does not involve the selection of monitor type. Refer to the Windows
NT4.0 instruction manual for further details on adjusting the resolution,
refresh rate, and number of colors.
Adjusting the monitor’s resolution and color number
Adjust the monitor’s resolution and color number by referring to your
computer’s instruction manual. The color number may vary according to
your computer or video board. The color palette setting and the actual
number of colors are as follows:
• High Color (16 bit)
computer’s instruction manual. The color number may vary according to
your computer or video board. The color palette setting and the actual
number of colors are as follows:
• High Color (16 bit)
t
65,536 colors
• True Color (24 bit)
t
about 16.77 million colors
In true color mode (24 bit), speed may be slower.
Selecting the on-screen menu
language (LANGUAGE/
INFORMATION)
language (LANGUAGE/
INFORMATION)
English, French, German, Spanish, and Italian versions of the on-
screen menus are available. The default setting is English.
screen menus are available. The default setting is English.
1
Press the MENU button.
See page 9 for more information on using the MENU button.
2
Press the
+
/
−
buttons to highlight
LANGUAGE/
INFORMATION and press the ENTER button.
See page 9 for more information on using the
+
/
−
and ENTER
buttons.
3
Press the ENTER button to select
(LANGUAGE)
and press
+
/
−
buttons to select a language.
• ENGLISH
• FRANÇAIS: French
• DEUTSCH: German
• ESPAÑOL: Spanish
• ITALIANO: Italian
• FRANÇAIS: French
• DEUTSCH: German
• ESPAÑOL: Spanish
• ITALIANO: Italian
To close the menu
Press the MENU button once to return to the main menu, and twice to
return to normal viewing. If no buttons are pressed, the menu closes
automatically after about 30 seconds.
return to normal viewing. If no buttons are pressed, the menu closes
automatically after about 30 seconds.
To reset to English
See “Resetting the adjustments (RESET)” on page 12.
MENU
ENTER
CONTRAS T / BR I GHTNE S
S
H - S I Z E / CENT ER
V - S I Z E / CENT ER
P I N / P I N BA L ANCE
KEY / KEY BA L ANCE
ROT A T I ON
ZOOM
COLOR
RESE T
V - S I Z E / CENT ER
P I N / P I N BA L ANCE
KEY / KEY BA L ANCE
ROT A T I ON
ZOOM
COLOR
RESE T
L ANGUAGE / I NFORMA T
N
O
I
DEGAUSS / CANCE L MO
E
R
I
MENU
EX I T
b
MENU
ENTER
ENGL I SH
FRA
NÇA I S
DEUT
SCH
I T A L I ANO
ESPAÑOL
SE L ECT
EX I T
LANGUAGE / I NFORMAT I ON
b
1-3
9
US
x
Using the MENU, ENTER, and
+
/
−
buttons
1
Select the menu you want to adjust.
Press the
+
/
−
buttons to highlight the desired menu. Press the
ENTER button to select the menu and adjustment items.
2
Adjust the menu.
Press the
+
/
−
buttons to make the adjustment.
3
Close the menu.
Press the MENU button once to return to the main menu, and
twice to return to normal viewing. If no buttons are pressed,
the menu closes automatically after about 30 seconds.
twice to return to normal viewing. If no buttons are pressed,
the menu closes automatically after about 30 seconds.
x
Resetting the adjustments
You can reset the adjustments using the RESET menu. See
page 12 for more information on resetting the adjustments.
page 12 for more information on resetting the adjustments.
Adjusting the contrast and
brightness (CONTRAST/
BRIGHTNESS)
brightness (CONTRAST/
BRIGHTNESS)
These settings are stored in memory for all input signals.
1
Press either one of the
6
(CONTRAST)
+
/
−
buttons.
The CONTRAST/BRIGHTNESS menu appears on the
screen.
screen.
2
Press the ENTER button to select
6
(CONTRAST) or
(BRIGHTNESS).
3
Press the
+
/
−
buttons to adjust either the contrast
(
6
) or brightness (
).
The menu automatically disappears after about 30 seconds.
MENU
ENTER
MENU
ENTER
b
MENU
ENTER
MENU
ENTER
CON T R A S T
2 6
6 0 . 0 k H z / 7 0 . 0 H z
1 0 2 4 X 7 6 8
SE L ECT
EX I T
CONTRAST / BR I GHTNESS
8
Customizing Your Monitor
You can make numerous adjustments to your monitor using the
on-screen menu.
on-screen menu.
Navigating the menu
Press the MENU button to display the main MENU on your
screen. See page 9 for more information on using the MENU
button.
screen. See page 9 for more information on using the MENU
button.
Use the
+
/
−
and ENTER buttons to select one of the following
menus. See page 9 for more information on using the
+
/
−
and
ENTER buttons.
x
Displaying the current input signal
The horizontal and vertical frequencies of the current input signal
are displayed in the CONTRAST/BRIGHTNESS menu. If the
signal matches one of this monitor’s factory preset modes, the
resolution is also displayed.
are displayed in the CONTRAST/BRIGHTNESS menu. If the
signal matches one of this monitor’s factory preset modes, the
resolution is also displayed.
1
CONTRAST/BRIGHTNESS
(page 9)
(page 9)
Select the CONTRAST/
BRIGHTNESS menu to adjust
the picture’s contrast and
brightness.
BRIGHTNESS menu to adjust
the picture’s contrast and
brightness.
2
H-SIZE/CENTER (page 10)
Select the H-SIZE/CENTER
menu to adjust the picture’s
horizontal size and centering.
menu to adjust the picture’s
horizontal size and centering.
3
V-SIZE/CENTER (page 10)
Select the V-SIZE/CENTER
menu to adjust the picture’s
vertical size and centering.
menu to adjust the picture’s
vertical size and centering.
4
PIN/PIN BALANCE (page 10)
Select the PIN/PIN BALANCE
menu to adjust the curvature
picture’s sides.
menu to adjust the curvature
picture’s sides.
5
KEY/KEY BALANCE
(page 10)
(page 10)
Select the KEY/KEY BALANCE
menu to adjust the angle of the
picture’s sides.
menu to adjust the angle of the
picture’s sides.
6
ROTATION (page 11)
Select the ROTATION menu to
adjust the picture’s rotation.
adjust the picture’s rotation.
CONTRAS T / BR I GHTNE S
S
H - S I Z E / CENT ER
V - S I Z E / CENT ER
P I N / P I N BA L ANCE
KEY / KEY BA L ANCE
ROT A T I ON
ZOOM
COLOR
RESE T
V - S I Z E / CENT ER
P I N / P I N BA L ANCE
KEY / KEY BA L ANCE
ROT A T I ON
ZOOM
COLOR
RESE T
L ANGUAGE / I NFORMA T
N
O
I
DEGAUSS / CANCE L MO
E
R
I
MENU
EX I T
CON T R A S T
2 6
6 0 . 0 k H z / 7 0 . 0 H z
1 0 2 4 X 7 6 8
SE L ECT
EX I T
CONTRAST / BR I GHTNESS
H - S I Z E
2 6
SE L ECT
EX I T
H - S I ZE / CENTER
V - S I Z E
2 6
SE L ECT
EX I T
V - S I ZE / CENTER
P I N
2 6
SE L ECT
EX I T
P I N / P I N BALANCE
K E Y
2 6
SE L ECT
EX I T
KEY / KEY BALANCE
RO T A T I ON
2 6
SE L ECT
EX I T
ROTAT I ON
7
ZOOM (page 11)
Select the ZOOM menu to enlarge
or reduce the picture.
or reduce the picture.
8
COLOR (page 11)
Select the COLOR menu to adjust
the picture’s color temperature.
You can use this to match the
monitor’s colors to a printed
picture’s colors.
the picture’s color temperature.
You can use this to match the
monitor’s colors to a printed
picture’s colors.
9
RESET (page 12)
Select the RESET menu to reset
the adjustments.
the adjustments.
0
LANGUAGE/INFORMATION
(page 7, 15)
(page 7, 15)
Select the LANGUAGE/
INFORMATION menu to choose
the on-screen menu’s language
and display this monitor’s
information box.
INFORMATION menu to choose
the on-screen menu’s language
and display this monitor’s
information box.
qa
DEGAUSS/CANCEL MOIRE
(page 12)
(page 12)
Select the DEGAUSS/CANCEL
MOIRE menu to degauss the
screen and cancel the moire.
MOIRE menu to degauss the
screen and cancel the moire.
Z OOM
2 6
SE L ECT
EX I T
ZOOM
K
K
K
R
5 0
G
5 0
B
5 0
SE L ECT
EX I T
COLOR
5000
6500
9300
USER
R E S E T
MOD E
A L L
EX I T
RESET
ENGL I SH
FRA
NÇA I S
DEUT
SCH
I T A L I ANO
ESPAÑOL
SE L ECT
EX I T
LANGUAGE / I NFORMAT I ON
D EGA U S S
ON
SE L ECT
EX I T
DEGAUSS / CANCEL MO I RE
CON T R A S T
2 6
6 0 . 0 k H z / 7 0 . 0 H z
1 0 2 4 X 7 6 8
SE L ECT
EX I T
CONTRAST / BR I GHTNESS
the resolution
of the current
input signal
of the current
input signal
the horizontal
and vertical
frequencies of
the current
input signal
and vertical
frequencies of
the current
input signal
1-4
10
Adjusting the horizontal size or
centering of the picture (H-SIZE/
CENTER)
centering of the picture (H-SIZE/
CENTER)
These settings are stored in memory for the current input signal.
1
Press the MENU button.
The main MENU appears on the screen.
2
Press the
+
/
−
buttons to highlight
H-SIZE/
CENTER, and press the ENTER button.
The H-SIZE/CENTER menu appears on the screen.
3
First press the ENTER button to select the desired
adjustment item. Then press the
adjustment item. Then press the
+
/
−
buttons to make
the adjustment.
Adjusting the vertical size or
centering of the picture (V-SIZE/
CENTER)
centering of the picture (V-SIZE/
CENTER)
These settings are stored in memory for the current input signal.
1
Press the MENU button.
The main MENU appears on the screen.
2
Press the
+
/
−
buttons to highlight
V-SIZE/
CENTER, and press the ENTER button.
The V-SIZE/CENTER menu appears on the screen.
3
First press the ENTER button to select the desired
adjustment item. Then press the
adjustment item. Then press the
+
/
−
buttons to make
the adjustment.
Adjusting the curvature of the
picture’s sides (PIN/PIN BALANCE)
picture’s sides (PIN/PIN BALANCE)
These settings are stored in memory for the current input signal.
1
Press the MENU button.
The main MENU appears on the screen.
2
Press the
+
/
−
buttons to highlight
PIN/PIN
BALANCE, and press the ENTER button.
The PIN/PIN BALANCE menu appears on the screen.
3
First press the ENTER button to select the desired
adjustment item. Then press the
adjustment item. Then press the
+
/
−
buttons to make
the adjustment.
Adjusting the angle of the picture’s
sides (KEY/KEY BALANCE)
sides (KEY/KEY BALANCE)
These settings are stored in memory for the current input signal.
1
Press the MENU button.
The main MENU appears on the screen.
2
Press the
+
/
−
buttons to highlight
KEY/KEY
BALANCE, and press the ENTER button.
The KEY/KEY BALANCE menu appears on the screen.
3
First press the ENTER button to select the desired
adjustment item. Then press the
adjustment item. Then press the
+
/
−
buttons to make
the adjustment.
Select
To
H-SIZE
adjust the horizontal size
H-CENTER
adjust the horizontal centering
Select
To
V-SIZE
adjust the vertical size
V-CENTER
adjust the vertical centering
Select
To
PIN
expand or contract the picture sides
PIN BALANCE
shift the picture sides to the left or right
Select
To
KEY
adjust the picture width at the top of
the screen
the screen
KEY BALANCE
shift the picture to the left or right at
the top of the screen
the top of the screen
11
US
Adjusting the picture’s rotation
(ROTATION)
(ROTATION)
This setting is stored in memory for all input signals.
1
Press the MENU button.
The main MENU appears on the screen.
2
Press the
+
/
−
buttons to highlight
ROTATION,
and press the ENTER button.
The ROTATION menu appears on the screen.
3
Press the
+
/
−
buttons to rotate the picture.
Enlarging or reducing the picture
(ZOOM)
(ZOOM)
This setting is stored in memory for the current input signal.
1
Press the MENU button.
The main MENU appears on the screen.
2
Press the
+
/
−
buttons to highlight
ZOOM and
press the ENTER button.
The ZOOM menu appears on the screen.
3
Press the
+
/
−
buttons to enlarge or reduce the
picture.
Note
Adjustment stops when either the horizontal or vertical size reaches its
maximum or minimum value.
maximum or minimum value.
Adjusting the color of the picture
(COLOR)
(COLOR)
The COLOR settings allow you to adjust the picture’s color
temperature by changing the color level of the white color field.
Colors appear reddish if the temperature is low, and bluish if the
temperature is high. This adjustment is useful for matching the
monitor’s colors to a printed picture’s colors.
This setting is stored in memory for all input signals.
temperature by changing the color level of the white color field.
Colors appear reddish if the temperature is low, and bluish if the
temperature is high. This adjustment is useful for matching the
monitor’s colors to a printed picture’s colors.
This setting is stored in memory for all input signals.
1
Press the MENU button.
The main MENU appears on the screen.
2
Press the
+
/
−
buttons to highlight
COLOR and
press the ENTER button.
The COLOR menu appears on the screen.
3
Press the
+
/
−
buttons to select a color temperature.
The preset color temperatures are 5000K, 6500K, and 9300K.
Since the default setting is 9300K, the whites will change
from a bluish hue to a reddish hue as the temperature is
lowered to 6500K and 5000K.
Since the default setting is 9300K, the whites will change
from a bluish hue to a reddish hue as the temperature is
lowered to 6500K and 5000K.
4
If necessary, fine tune the color temperature.
First press the
+
/
−
buttons to select USER. Then press the
ENTER button to select R (red), G (green), or B (blue) and
press the
press the
+
/
−
buttons to make the adjustment.
If you fine tune the color temperature, the new color settings
are stored in memory and recalled whenever you select
USER.
are stored in memory and recalled whenever you select
USER.
K
K
K
R
5 0
G
5 0
B
5 0
USER - G
EX I T
COLOR
5000
6500
9300
USER
Click on the first or last page to see other CPD-210EST / CPD-210GS service manuals if exist.