Sony DVP-S320 Service Manual ▷ View online
– 5 –
4.
HOW TO SERVICE MB-82 BOARD
1) Remove the case from the set. (Refer to 2-1)
2) Remove the MB-82 board. (Refer to 2-2)
3) Set the MB-82 board as shown in Fig. 3.
2) Remove the MB-82 board. (Refer to 2-2)
3) Set the MB-82 board as shown in Fig. 3.
Note:
Do not disconnect wiring, except FMA-7.
Fig. 3
2.
NOTE ON REMOVE THE CASE
1) Remove seven screws. (See Fig. 1)
2) Open the side of case. (See Fig. 1)
3) Remove the case as lift straight. (See Fig. 1)
2) Open the side of case. (See Fig. 1)
3) Remove the case as lift straight. (See Fig. 1)
Fig. 1
3.
DISC REMOVAL PROCEDURE
(at POWER OFF)
(at POWER OFF)
1) Insert a tapering driver into the aperture of the unit bottom,
and move the lever of chuck cam in the direction of the arrow
A. (See Fig. 2)
A. (See Fig. 2)
2) Draw out the tray in the direction of the arrow B, and remove
a disc. (See Fig. 2)
Fig. 2
Two screws
Three screws
Case
Two screws
Lever of chuck cam
Aperture
Tray
A
B
MB-82 board
grooves
1-1
SECTION 1
GENERAL
This section is extracted from instruction
manual (3-867-036-11).
manual (3-867-036-11).
DVP-S320
1-2
1-3
Click on the first or last page to see other DVP-S320 service manuals if exist.