Sony DVP-NS900V Service Manual ▷ View online
1-7
30
∗
When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear speakers and a
subwoofer.
subwoofer.
D-2
D-1
SACD/DVD player
or
Front
(R)
Front
(L)
Rear
(R)
Subwoofer
l
: Signal flow
Rear
(L)
Amplifier (receiver) with Dolby Surround decoder
Center
Rear
*
(mono)
Stereo
audio cord
(not supplied)
audio cord
(not supplied)
[Speakers]
Coaxial digital
cord (not supplied)
cord (not supplied)
(white)
(red)
to coaxial or optical digital input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
[Speakers]
or
to audio input
(white)
(red)
Hookups
31
Step 3: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet.
Do not connect the power cord of your player to the “switched” power socket of an amplifier
(receiver). When you turn off the power of your amplifier (receiver), the menu setting for the
player such as Playback Memory may be lost.
(receiver). When you turn off the power of your amplifier (receiver), the menu setting for the
player such as Playback Memory may be lost.
Step 4: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press
To skip an adjustment, press
>. To return to the previous adjustment, press ..
1
Turn on the TV.
2
Switch the input selector on the TV to the player.
3
Press POWER on the player and press
[/1 on the remote.
“
Press [ENTER] to run QUICK SETUP” appears at the bottom of the screen. If this message does
not appear, select “QUICK” under “SETUP” in the Control Menu to run Quick Setup (page 80).
4
Press ENTER without inserting a disc.
The Setup Display for selecting the language used in the on-screen display appears.
.
/
> X
/
x
POWER
.
/
>
X
/
x
ENTER
ENTER
[
/
1
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
MENU:
AUDIO:
SUBTITLE:
FRENCH
ENGLISH
ENGLISH
ENGLISH
SPANISH
PORTUGUESE
continued
32
5
Press X/x to select a language.
The player uses the language selected here to display the menu and subtitles as well.
6
Press ENTER.
The Setup Display for selecting the aspect ratio of the TV to be connected appears.
7
Press X/x to select the item.
8
Press ENTER.
The Setup Display for selecting the type of video signal appears.
9
Press X/x to select the item.
Select PROGRESSIVE only if you have made video connection
C (page 20) and wish to
view progressive video signals.
q;
Press ENTER.
The Setup Display for selecting the type of jack used to connect your amplifier (receiver)
appears.
appears.
TV Type
You select
Page
4:3 standard TV
4:3 LETTER BOX or 4:3 PAN
SCAN
SCAN
82
A wide-screen TV or a 4:3 standard TV
with a wide-screen mode
with a wide-screen mode
16:9
82
TV Type
You select
Page
Interlace format TV (standard TV)
INTERLACE
84
Progressive format TV
PROGRESSIVE
84
SCREEN SETUP
TV TYPE:
STARTUP SCREEN:
SCREEN SAVER:
4:3 LETTER BOX
BACKGROUND:
4:3 PAN SCAN
COMPONENT OUT:
INTERLACE
MODE:
AUTO
16:9
4:3 LETTER BOX
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
SCREEN SAVER:
BACKGROUND:
4:3 LETTER BOX
ON
JACKET PICTURE
STARTUP SCREEN:
INTERLACE
STANDARD
RGB
COMPONENT OUT:
MODE:
PROGRESSIVE
INTERLACE
Is this player connected to an amplifier
(receiver)? Select the type of jack you
are using.
(receiver)? Select the type of jack you
are using.
AUDIO OUTPUT L/R
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
YES
NO
Hookups
33
qa
Press X/x to select the item, then press ENTER.
•
When “NO” or “AUDIO OUTPUT L/R” is selected, Quick Setup is finished and
connections are complete.
connections are complete.
•
When “DIGITAL OUTPUT” or “DIGITAL & 5.1CH OUTPUT” is selected, the Setup
Display for “DOLBY DIGITAL” appears.
Display for “DOLBY DIGITAL” appears.
qs
Press X/x to select the item.
Choose the item that matches the audio connection you selected in pages 25 to 29 (
through ).
qd
Press ENTER.
“
DTS” is selected.
Audio Cord Connecting Type
You select
AUDIO OUTPUT L/R
DIGITAL OUTPUT
or both
and
DIGITAL & 5.1CH OUTPUT
NO
Audio Cord Connection Type
You select
Page
D-PCM
89
DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby
Digital decoder)
amplifier (receiver) has a Dolby
Digital decoder)
89
C-1
D-1
B-2
C-2
D-2
B-1
B-1
B-2
A
B
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
OFF
STANDARD
AUDIO FILTER:
SHARP
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
D-PCM
D-PCM
48kHz/96kHz PCM:
DTS:
DOLBY DIGITAL
C-2
D-2
B-2
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
OFF
STANDARD
AUDIO FILTER:
SHARP
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
D-PCM
D-PCM
48kHz/96kHz PCM:
DTS
DTS:
D-PCM
continued
1-8
34
qf
Press X/x to select the item.
Choose the item that matches the audio connection you selected in pages 25 to 29 (
through ).
qg
Press ENTER.
•
When “DIGITAL OUTPUT” is selected in Step qa, Quick Setup is finished. All
connections and setup operations are complete.
connections and setup operations are complete.
•
When “DIGITAL & 5.1CH OUTPUT” is selected in Step qa, the Setup Display for
“
“
SPEAKER SETUP” appears.
qh
Press X/x to select the size of the center speaker.
If no center speaker is connected, select “NONE.” Refer to page 91 for each selection item.
qj
Press ENTER.
The Setup Display for selecting the size of the rear speaker appears.
qk
Press X/x to select the size.
If no rear speaker is connected, select “NONE.”
“
“
SIDE” and “REAR” refer to the speakers’ position relative to your listening position.
Refer to page 91 for each selection item.
Audio Cord Connection Type
You select
Page
D-PCM
89
DTS (only if the amplifier
(receiver) has a DTS decoder)
(receiver) has a DTS decoder)
89
B
D
C-2
D-2
B-2
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
DISTANCE:
BALANCE:
LEVEL:
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
SMALL
LARGE
NONE
LARGE
REAR:
SUBWOOFER:
SUBWOOFER:
To set press
then
ENTER
NONE
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
DISTANCE:
BALANCE:
LEVEL:
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
LARGE
REAR:
SUBWOOFER:
SUBWOOFER:
NONE
LARGE(REAR)
NONE
LARGE
Hookups
35
ql
Press ENTER.
The Setup Display for selecting whether or not you have connected a subwoofer appears.
w;
Press X/x to select the item.
wa
Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
Note
You can directly start Quick Setup only when you run it for the first time.
To run Quick Setup a second time, select “QUICK” under “SETUP” in the Control Menu (page 80).
To run Quick Setup a second time, select “QUICK” under “SETUP” in the Control Menu (page 80).
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in pages 25 to 29
(
items must be set as described below for the audio connection you selected in pages 25 to 29
(
through
). Each of these are the default settings and do not need to be adjusted when
you first connect the player. Refer to page 80 for using the Setup Display.
Audio Connection (pages 25 to 29)
No additional settings are needed.
•
If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 88).
•
Set “48kHz/96kHz PCM” to “96kHz/24bit,” only if you connect an amplifier (receiver) that
conforms to 96 kHz digital audio input (page 89).
conforms to 96 kHz digital audio input (page 89).
Enjoying the surround sound effects
Item
You select
Page
DISTANCE
BALANCE
LEVEL
BALANCE
LEVEL
Set according to the connected
speakers
speakers
91
Item
You select
Page
DOWNMIX
DOLBY SURROUND
88
DIGITAL OUT
ON
88
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
DISTANCE:
BALANCE:
LEVEL:
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
LARGE
LARGE
REAR:
SUBWOOFER:
SUBWOOFER:
To set, press , then .
To quit press
To quit press
ENTER
ENTER
SETUP
DISPLAY
DISPLAY
NONE
NONE
YES
LARGE(REAR)
B
D
A
B-1
B-2
C-2
D-2
continued
36
•
If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 88).
Item
You select
Page
DOWNMIX
DOLBY SURROUND
88
C-1
D-1
P
lay
ing Disc
ing Disc
s
37
Playing Discs
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
1
Turn on your TV.
2
Switch the input selector on the TV
to the player.
to the player.
When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel.
select the appropriate channel.
3
Press POWER on the player.
The player enters standby mode and the
power indicator lights up in red.
power indicator lights up in red.
4
Press
A on the player, and place a
disc on the disc tray.
The player automatically turns on and
the power indicator lights up in green.
the power indicator lights up in green.
5
Press
H.
The disc tray closes, and the player
starts playback (continuous play).
Adjust the volume on the TV or the
amplifier (receiver).
starts playback (continuous play).
Adjust the volume on the TV or the
amplifier (receiver).
After following Step 5
Depending on the disc, a menu may appear
on the TV screen. You can play the disc
interactively by following the instructions on
the menu. DVD VIDEO (page 40), VIDEO
CD (page 42).
on the TV screen. You can play the disc
interactively by following the instructions on
the menu. DVD VIDEO (page 40), VIDEO
CD (page 42).
To turn on the player
Press POWER on the player. The player
enters standby mode and the power indicator
lights up in red. Press
enters standby mode and the power indicator
lights up in red. Press
[/1 on the remote. The
player turns on and the power indicator lights
up in green. In standby mode, the player also
turns on by pressing
up in green. In standby mode, the player also
turns on by pressing
A on the player or by
pressing
H.
To turn off the player
Press
[/1 on the remote. The player enters
standby mode and the power indicator lights
up in red. To turn off the player completely,
press POWER on the player. While playing a
disc, do not turn off the player by pressing
POWER. Doing so may cancel the menu
settings. When you turn off the player, first
press
up in red. To turn off the player completely,
press POWER on the player. While playing a
disc, do not turn off the player by pressing
POWER. Doing so may cancel the menu
settings. When you turn off the player, first
press
x to stop playback and then press [/1
on the remote.
VIDEO
ON/OFF
ON/OFF
POWER
A
H
Power indicator
[
/
1
H
x
x
VIDEO OFF
PHONES LEVEL control
PHONES jack
With the playback side facing down
continued
1-9
38
To use headphones
Connect headphones to the PHONES jack
and adjust the headphones’ volume by
turning PHONES LEVEL.
and adjust the headphones’ volume by
turning PHONES LEVEL.
To use the VIDEO ON/OFF button
You can switch the video output on or off.
Press VIDEO ON/OFF (or VIDEO OFF on
the player) to switch the video output off.
When no video signal output from the player,
the VIDEO OFF indicator lights up on the
player.
Press VIDEO ON/OFF (or VIDEO OFF on
the player) to switch the video output off.
When no video signal output from the player,
the VIDEO OFF indicator lights up on the
player.
Note
SACD audio signals are not output from the digital
jack.
jack.
z
The Replay function is useful when you want to
review a scene or dialog that you missed.
Note
You may not be able to use the Replay function with
some scenes.
some scenes.
Additional operations
To
Operation
Stop
Press
x
Pause
Press
X
Resume play after
pause
pause
Press
X or H
Go to the next chapter,
track or scene in
continuous play mode
track or scene in
continuous play mode
Press
>
Go back to the
preceding chapter,
track or scene in
continuous play mode
preceding chapter,
track or scene in
continuous play mode
Press
.
Stop play and remove
the disc
the disc
Press
Z
Replay the previous
scene (DVD VIDEO
only)
scene (DVD VIDEO
only)
Press REPLAY
H
./>
Z
X
x
REPLAY
P
lay
ing Disc
ing Disc
s
39
Resuming Playback from
the Point Where You
Stopped the Disc
the Point Where You
Stopped the Disc
(Resume Play)
When you stop the disc, the player
remembers the point where you pressed
remembers the point where you pressed
x
and “RESUME” appears on the front panel
display. As long as you do not open the disc
tray, Resume Play works even if the player
enters standby mode by pressing
display. As long as you do not open the disc
tray, Resume Play works even if the player
enters standby mode by pressing
[/1.
1
While playing a disc, press
x to
stop playback.
“
RESUME” appears on the front panel
display and you can restart the disc
from the point where you stopped the
disc.
If “RESUME” does not appear,
Resume Play is not available.
from the point where you stopped the
disc.
If “RESUME” does not appear,
Resume Play is not available.
2
Press
H.
The player starts playback from the
point where you stopped the disc in
Step 1.
point where you stopped the disc in
Step 1.
z
To play from the beginning of the disc, press
x
twice, then press
H.
Notes
•
Depending on where you stopped the disc, the player
may not resume playback from exactly the same
point.
may not resume playback from exactly the same
point.
•
The point where you stopped playing is cleared
when:
—
when:
—
you turn the power off by pressing POWER on
the player.
the player.
—
you change the play mode.
—
you change the settings on the Setup Display.
x
H
40
Using the DVD’s Menu
A DVD is divided into long sections of a
picture or a music feature called “titles.”
When you play a DVD which contains
several titles, you can select the title you want
using the TOP MENU button.
When you play DVDs that allow you to select
items such as the language for the subtitles
and the language for the sound, select these
items using the MENU button.
picture or a music feature called “titles.”
When you play a DVD which contains
several titles, you can select the title you want
using the TOP MENU button.
When you play DVDs that allow you to select
items such as the language for the subtitles
and the language for the sound, select these
items using the MENU button.
1
Press TOP MENU or MENU.
The disc’s menu appears on the TV
screen.
The contents of the menu vary from
disc to disc.
screen.
The contents of the menu vary from
disc to disc.
2
Press C/X/x/c or the number
buttons to select the item you want
to play or change.
buttons to select the item you want
to play or change.
3
Press ENTER.
z
You can also display the disc’s menu by pressing
TOP MENU or MENU on the player.
Selecting “ORIGINAL” or
“PLAY LIST” on a DVD-RW
Disc
“PLAY LIST” on a DVD-RW
Disc
Some DVD-RW discs in VR (Video
Recording) mode have two types of titles for
playback: originally recorded titles
(ORIGINAL) and titles that can be created on
recordable DVD players for editing (PLAY
LIST). You can select the type of titles to be
played.
Recording) mode have two types of titles for
playback: originally recorded titles
(ORIGINAL) and titles that can be created on
recordable DVD players for editing (PLAY
LIST). You can select the type of titles to be
played.
1
Press DISPLAY in stop mode.
The Control Menu appears.
2
Press X/x to select
(ORIGINAL/PLAY LIST), then press
ENTER.
ENTER.
The options for “ORIGINAL/PLAY
LIST” appear.
LIST” appear.
TOP MENU
ENTER
C
/
X
/
x
/
c
Number
buttons
buttons
MENU
DISPLAY
X
/
x
ENTER
1 8 ( 3 4 )
1 2 ( 2 7 )
DVD-RW
PLAY LIST
PLAY LIST
ORIGINAL
STOP
P
lay
ing Disc
ing Disc
s
41
3
Press X/x to select the setting.
•
PLAY LIST: plays the titles created
from “ORIGINAL” for editing.
from “ORIGINAL” for editing.
•
ORIGINAL: plays the titles originally
recorded.
recorded.
4
Press ENTER.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
Menu is turned off.
Note
Repeat Play and A-B Repeat Play work only within
the titles of the selected type.
the titles of the selected type.
Selecting a Playback Area
for an SACD Disc
for an SACD Disc
Some SACDs consist of a 2 channel playback
area and a multi-channel playback area. You
can select the playback area you want to
listen to.
area and a multi-channel playback area. You
can select the playback area you want to
listen to.
1
Toggle the scroll key up or down so that
“MULTI/2CH” appears in the LCD
screen.
“MULTI/2CH” appears in the LCD
screen.
2
Press down on the scroll key repeatedly
to select “MULTI” for a multi-channel
playback area or “2CH” for a 2 channel
playback area.
to select “MULTI” for a multi-channel
playback area or “2CH” for a 2 channel
playback area.
“
MULTI” appears in the front panel display
when playing a Multi-channel playback area.
Selecting a playback area on a
2 channel + multi-channel SACD
2 channel + multi-channel SACD
DISPLAY
X
/
x
ENTER
Scroll key
continued
1-10
42
To select a playback area using the
Control Menu
1
Press DISPLAY.
The Control Menu appears.
The Control Menu appears.
2
Press X/x to select
(MULTI/
2CH), then press ENTER.
3
Press X/x to select the playback area,
“
“
MULTI” or “2CH,” then press ENTER.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
Menu is turned off.
Some SACDs consist of an HD layer and a
CD layer. You can select the playback layer
you want to listen to.
CD layer. You can select the playback layer
you want to listen to.
1
While the disc is stopped, toggle the
scroll key up or down so that “SACD/CD”
appears in the LCD screen.
scroll key up or down so that “SACD/CD”
appears in the LCD screen.
2
Press down on the scroll key repeatedly
to select “SACD” for an HD layer or “CD”
for a CD layer.
When playing the CD layer, “CD”
appears in the front panel display.
to select “SACD” for an HD layer or “CD”
for a CD layer.
When playing the CD layer, “CD”
appears in the front panel display.
Notes
•
For details about SACD discs, see page 97 (Super
Audio CD).
Audio CD).
•
Each play mode function works only within the
selected layer or playback area.
selected layer or playback area.
Playing VIDEO CDs with
PBC Functions
PBC Functions
(PBC Playback)
With PBC (Playback Control) functions, you
can enjoy simple interactive operations,
search functions, and other such operations.
PBC playback allows you to play VIDEO
CDs interactively by following the menu on
the TV screen.
can enjoy simple interactive operations,
search functions, and other such operations.
PBC playback allows you to play VIDEO
CDs interactively by following the menu on
the TV screen.
1
Start playing a VIDEO CD with PBC
functions.
functions.
The menu for your selection appears.
2
Select the item number you want
by pressing X/x or the number
buttons.
by pressing X/x or the number
buttons.
3
Press ENTER.
4
Follow the instructions in the menu
for interactive operations.
for interactive operations.
Refer to the instructions supplied with
the disc, as the operating procedure may
differ depending on the VIDEO CD.
the disc, as the operating procedure may
differ depending on the VIDEO CD.
Selecting a playback layer when
playing a hybrid SACD
playing a hybrid SACD
./>
H
X
/
x
x
ENTER
Number
buttons
buttons
O
RETURN
P
lay
ing Disc
ing Disc
s
43
To go back to the menu
Press
O RETURN.
z
To play without using PBC, press
./> or the
number buttons while the player is stopped to select a
track, then press
track, then press
H or ENTER.
“
Play without PBC” appears on the TV screen and the
player starts continuous play. You cannot play still
pictures such as a menu.
To return to PBC playback, press
pictures such as a menu.
To return to PBC playback, press
x twice then press
H.
Note
Depending on the VIDEO CD, “Press ENTER” in
Step 3 may appear as “Press SELECT” in the
instructions supplied with the disc. In this case, press
H.
Step 3 may appear as “Press SELECT” in the
instructions supplied with the disc. In this case, press
H.
Various Play Mode
Functions
Functions
(Program Play, Shuffle
Play, Repeat Play, A-B Repeat Play)
You can set the following play modes:
•
Program Play (page 43)
•
Shuffle Play (page 45)
•
Repeat Play (page 46)
•
A-B Repeat Play (page 47)
Note
The play mode is canceled when:
—
you open the disc tray.
—
the player enters standby mode by pressing
[/1
on the remote.
—
you turn the power off by pressing POWER on the
player.
player.
You can play the contents of a disc in the
order you want by arranging the order of the
titles, chapters, or tracks on the disc to create
your own program. You can program up to 99
titles, chapters, and tracks.
order you want by arranging the order of the
titles, chapters, or tracks on the disc to create
your own program. You can program up to 99
titles, chapters, and tracks.
Creating your own program (Program
Play)
Play)
H
CLEAR
ENTER
DISPLAY
Number
buttons
buttons
Scroll key
X
/
x
/
c
PROGRAM
continued
44
1
Press DISPLAY twice (when playing an
SACD/CD, press once).
The Control Menu appears.
SACD/CD, press once).
The Control Menu appears.
2
Press X/x to select
(PROGRAM), then press ENTER.
The options for “PROGRAM” appear.
The options for “PROGRAM” appear.
3
Press X/x to select “SET t,” then
press ENTER.
The display for programming appears.
press ENTER.
The display for programming appears.
4
Press c.
The cursor moves to the title or track (in
this case, “01”).
The cursor moves to the title or track (in
this case, “01”).
5
Select the title, chapter, or track you
want to program.
want to program.
xWhen playing a DVD VIDEO
For example, select chapter “03” of title
“
For example, select chapter “03” of title
“
02.”
Press X/x or the number buttons to select
“
“
02” under “T,” then press ENTER.
Next, press X/x or the number buttons to
select “03” under “C,” then press
ENTER.
select “03” under “C,” then press
ENTER.
xWhen playing a VIDEO CD,
SACD, or CD
For example, select track “02.”
Press X/x or the number buttons to select
“
SACD, or CD
For example, select track “02.”
Press X/x or the number buttons to select
“
02” under “T,” then press ENTER.
A track number may be displayed in 3
digits for an SACD.
digits for an SACD.
OFF
OFF
SET
ON
OFF
SET
ON
1 8 ( 3 4 )
1 2 ( 2 7 )
T 1 : 3 2 : 5 5
DVD VIDEO
PLAY
PROGRAM
1. TITLE
ALL CLEAR
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
T
– –
01
02
03
04
05
02
03
04
05
“TRACK” is displayed when you play a
VIDEO CD, SACD, or CD.
VIDEO CD, SACD, or CD.
Titles or tracks
recorded on a disc
recorded on a disc
PROGRAM
1. TITLE – –
ALL CLEAR
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
T
C
ALL
01
02
03
04
05
06
02
03
04
05
06
– –
01
02
03
04
05
02
03
04
05
Chapters recorded on a disc
PROGRAM
1. TITLE – –
ALL CLEAR
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
C
ALL
03
04
05
06
04
05
06
T
– –
01
02
03
04
05
02
03
04
05
02
01
T
– –
01
02
03
04
05
02
03
04
05
PROGRAM
1. TITLE 0 2 – 0 3
ALL CLEAR
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
Selected title and chapter
PROGRAM
1. TRACK 0 2
ALL CLEAR
2. TRACK – –
3. TRACK – –
4. TRACK – –
5. TRACK – –
6. TRACK – –
3. TRACK – –
4. TRACK – –
5. TRACK – –
6. TRACK – –
7. TRACK – –
0:15:30
– –
01
02
03
04
05
02
03
04
05
T
Selected track
Total time of the programmed tracks
P
lay
ing Disc
ing Disc
s
45
6
To program other titles, chapters, or
tracks, repeat Steps 4 to 5.
The programmed titles, chapters, and
tracks are displayed in the selected order.
tracks, repeat Steps 4 to 5.
The programmed titles, chapters, and
tracks are displayed in the selected order.
7
Press
H to start Program Play.
Program Play begins.
When the program ends, you can restart
the same program again by pressing
When the program ends, you can restart
the same program again by pressing
H.
To return to normal play
Press CLEAR, or select “OFF” in Step 3.
To play the same program again, select “ON”
in Step 3 and press
To play the same program again, select “ON”
in Step 3 and press
H.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
Menu is turned off.
To change or cancel a program
1
Follow Steps 1 through 3 of “Creating
your own program (Program Play).”
your own program (Program Play).”
2
Select the program number of the title,
chapter, or track you want to change or
cancel using X/x or the number buttons,
and press c.
chapter, or track you want to change or
cancel using X/x or the number buttons,
and press c.
3
Follow Step 5 for new programming. To
cancel a program, select “--” under “T,”
then press ENTER.
cancel a program, select “--” under “T,”
then press ENTER.
To cancel all the titles, chapters, or
tracks in the programmed order
1
Follow Steps 1 through 3 of “Creating
your own program (Program Play).”
your own program (Program Play).”
2
Press X and select “ALL CLEAR.”
3
Press ENTER.
z
You can do Repeat Play or Shuffle Play of the
programmed titles, chapters, or tracks. During the
Program Play, toggle the scroll key up or down to
select “REPEAT” or “SHUFFLE” and press down on
the scroll key. Or set “REPEAT” or “SHUFFLE” to
“
Program Play, toggle the scroll key up or down to
select “REPEAT” or “SHUFFLE” and press down on
the scroll key. Or set “REPEAT” or “SHUFFLE” to
“
ON” using the Control Menu display.
z
You can select “PROGRAM” directly by pressing
PROGRAM.
Note
The number of titles, chapters, or tracks displayed are
the same as the number of titles, chapters, or tracks
recorded on a disc.
the same as the number of titles, chapters, or tracks
recorded on a disc.
You can have the player “shuffle” titles,
chapters, or tracks and play them in random
order. Subsequent “shuffling” may produce a
different playing order.
chapters, or tracks and play them in random
order. Subsequent “shuffling” may produce a
different playing order.
1
Press DISPLAY twice during playback
(When playing an SACD/CD, press
once).
The Control Menu appears.
(When playing an SACD/CD, press
once).
The Control Menu appears.
2
Press X/x to select
(SHUFFLE), then press ENTER.
The options for “SHUFFLE” appear.
The options for “SHUFFLE” appear.
Playing in random order (Shuffle
Play)
Play)
DISPLAY
H
X
/
x
ENTER
CLEAR
Scroll key
1 8 ( 3 4 )
1 2 ( 2 7 )
T 1 : 3 2 : 5 5
OFF
CHAPTER
TITLE
OFF
DVD VIDEO
PLAY
continued
Click on the first or last page to see other DVP-NS900V service manuals if exist.