DOWNLOAD Sony DVP-NC875V Service Manual ↓ Size: 10.66 MB | Pages: 98 in PDF or view online for FREE

Model
DVP-NC875V
Pages
98
Size
10.66 MB
Type
PDF
Document
Service Manual
Brand
Device
DVD
File
dvp-nc875v.pdf
Date

Sony DVP-NC875V Service Manual ▷ View online

— 5 —
DVP-NC875V
1.
NOTE ON REMOVING THE UPPER
CASE
1)
Remove the two tapping screws and three screws. (See Fig. 1)
2)
Open the sides of case. (See Fig. 1)
3)
Remove the upper case in the direction of the arrow A.
(See Fig. 1)
2.
DISC REMOVAL PROCEDURE
1)
Insert a flat-head (-) screwdriver into a hole at the bottom, and
rotate the cam gear in the direction of the arrow A. (See Fig.2)
Three screws +BV3 (3CR)
Two tapping screws
Two tapping screws
3.
NOTE ON REMOVING THE TABLE
ASS’Y
1)
Remove the two screws. (See Fig. 3)
A
Cam gear
Table
Hole
Screw
(M2.68)
Screw
(M2.68)
2)
Remove the two Plates (guide) in the direction of the arrows
A
 and B. (See Fig. 4)
3)
Remove the Table ass’y in the direction of the arrow C.
(See Fig. 4)
4)
Remove the Flexible flat cable (See Fig. 4).
B
A
C
FMS-005 flexible flat cable
(CN002, 6P)
Table ass'y
Plate (guide)
Plate (guide)
Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
SERVICE NOTE
— 6 —
DVP-NC875V
4.
NOTE ON MOUNTING THE GEARS
1)
Mount the gear (chuck). (See Fig. 5)
2)
Rotate the gear (chuck) in the direction of the arrow. (down
position) (See Fig. 5)
3)
Connect the boss of the gear (swing) with the groove of the
rotary encoder and mount the gear (swing). (See Fig. 6)
4)
Align triangle mark of the chassis with the groove of the gear
(swing). (See Fig. 6)
Gear (chuck)
 
Align triangle mark of the chassis
with the groove of the gear (swing).
Gear (swing)
Gear (swing)
Boss
Groove
5)
Mount the while aligning the engagement of the gear (swing)
and the gear (chuck). (See Fig. 7)
Engagement the gear (swing) and the gear (chuck).
Gear (swing)
Gear (chuck)
Fig. 5.
Fig. 6.
Fig. 7.
— 6E —
CAUTION
When handling IF-114 PWB avoid contact with the sharp metal
edge on the top side of Vacuum Fluorescent Display (ND401).
5.
Caution Point on the PWB IF-114
1-1
DVP-NC875V
5
Precautions
On safety
• To prevent fire or shock hazard, do not 
place objects filled with liquids, such as 
vases, on the apparatus.
• Should any solid object or liquid fall into 
the cabinet, unplug the player and have it 
checked by qualified personnel before 
operating it any further.
On power sources
• The player is not disconnected from the AC 
power source as long as it is connected to 
the wall outlet, even if the player itself has 
been turned off.
• If you are not going to use the player for a 
long time, be sure to disconnect the player 
from the wall outlet. To disconnect the AC 
power cord, grasp the plug itself; never pull 
the cord.
On placement
• Place the player in a location with adequate 
ventilation to prevent heat build-up in the 
player.
• Do not place the player on a soft surface 
such as a rug.
• Do not place the player in a location near 
heat sources, or in a place subject to direct 
sunlight, excessive dust, or mechanical 
shock.
• Do not install the player in an inclined 
position. It is designed to be operated in a 
horizontal position only.
• Keep the player and the discs away from 
equipment with strong magnets, such as 
microwave ovens, or large loudspeakers.
• Do not place heavy objects on the player.
On operation
• If the player is brought directly from a cold 
to a warm location, or is placed in a very 
damp room, moisture may condense on the 
lenses inside the player. Should this occur, 
the player may not operate properly. In this 
case, remove the disc and leave the player 
turned on for about half an hour until the 
moisture evaporates.
• When you move the player, take out any 
discs. If you don’t, the disc may be 
damaged.
On adjusting volume
Do not turn up the volume while listening to 
a section with very low level inputs or no 
audio signals. If you do, the speakers may be 
damaged when a peak level section is played.
On cleaning
Clean the cabinet, panel, and controls with a 
soft cloth slightly moistened with a mild 
detergent solution. Do not use any type of 
abrasive pad, scouring powder or solvent 
such as alcohol or benzine.
On cleaning discs
Do not use a commercially available cleaning 
disc. It may cause a malfunction.
On transporting the player
Before transporting the player, follow the 
procedure below to return the internal 
mechanisms to their original positions.
1
Remove all the discs from the disc tray.
2
Press A to close the disc tray.
Make sure that “NO DISC” appears on 
the front panel display.
3
Press ?/1 to turn off the player.
The player enters standby mode.
4
Disconnect the AC power cord.
If you have any questions or problems 
concerning your player, please consult your 
nearest Sony dealer.
IMPORTANT NOTICE
Caution: This player is capable of holding a 
still video image or on-screen display image 
on your television screen indefinitely. If 
you leave the still video image or on-screen 
display image displayed on your TV for an 
extended period of time you risk permanent 
damage to your television screen. Plasma 
display panel televisions and projection 
televisions are susceptible to this.
9
Example of discs that the player 
cannot play
The player cannot play the following discs:
• CD-ROMs/CD-Rs/CD-RWs other than 
those recorded in the formats listed on the 
previous page.
• CD-ROMs recorded in PHOTO CD format.
• Data part of CD-Extras.
• DVD-ROMs.
• DVD Audios.
Also, the player cannot play the following 
discs:
• A DVD VIDEO with a different region 
code.
• A disc recorded in a color system other than 
NTSC, such as PAL or SECAM (this player 
conforms to the NTSC color system).
• A disc that has a non-standard shape (e.g., 
card, heart).
• A disc with paper or stickers on it.
• A disc that has the adhesive of cellophane 
tape or a sticker still left on it.
Region code
Your player has a region code printed on the 
back of the unit and only will play DVD 
VIDEOs (playback only) labeled with 
identical region codes. This system is used to 
protect copyrights.
DVD VIDEOs labeled 
 will also play on 
this player.
If you try to play any other DVD VIDEO, the 
message “Playback prohibited by area 
limitations.” will appear on the TV screen. 
Depending on the DVD VIDEO, there may 
be no region code indication, even though 
playing the DVD VIDEO is prohibited by 
area restrictions.
Notes
• Notes about DVD+RWs/DVD+Rs, DVD-RWs/
DVD-Rs or CD-Rs/CD-RWs
Some DVD+RWs/DVD+Rs, DVD-RWs/DVD-
Rs, or CD-Rs/CD-RWs cannot be played on this 
player due to the recording quality or physical 
condition of the disc, or the characteristics of the 
recording device and authoring software.
The disc will not play if it has not been correctly 
finalized. For more information, refer to the 
operating instructions for the recording device. 
Note that some playback functions may not work 
with some DVD+RWs/DVD+Rs, even if they 
have been correctly finalized. In this case, view 
the disc by normal playback. Also some DATA 
CDs created in Packet Write format cannot be 
played.
• Music discs encoded with copyright protection 
technologies
This product is designed to playback discs that 
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with 
copyright protection technologies are marketed 
by some record companies. Please be aware that 
among those discs, there are some that do not 
conform to the CD standard and may not be 
playable by this product.
Note on playback operations of 
DVDs and VIDEO CDs
Some playback operations of DVDs and 
VIDEO CDs may be intentionally set by 
software producers. Since this player plays 
DVDs and VIDEO CDs according to the disc 
contents the software producers designed, 
some playback features may not be available. 
Also, refer to the instructions supplied with 
the DVDs or VIDEO CDs.
ALL
DVP–XXXX 
00V 00Hz
00W
NO. 
0-000-000-00
X
Region code
,continued
10
Copyrights
This product incorporates copyright 
protection technology that is protected by 
U.S. patents and other intellectual property 
rights. Use of this copyright protection 
technology must be authorized by 
Macrovision, and is intended for home and 
other limited viewing uses only unless 
otherwise authorized by Macrovision. 
Reverse engineering or disassembly is 
prohibited.
Notes About the Discs
• To keep the disc clean, handle the disc by its 
edge. Do not touch the surface.
• Do not expose the disc to direct sunlight or 
heat sources such as hot air ducts, or leave it 
in a car parked in direct sunlight as the 
temperature may rise considerably inside 
the car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth.
Wipe the disc from the center out.
• Do not use solvents such as benzine, 
thinner, commercially available cleaners, or 
anti-static spray intended for vinyl LPs.
• If you have printed the disc's label, dry the 
label before playing.
8
About This Manual
• Instructions in this manual describe the 
controls on the remote. You can also use the 
controls on the player if they have the same 
or similar names as those on the remote.
• “DVD” may be used as a general term for 
DVD VIDEOs, DVD+RWs/DVD+Rs and 
DVD-RWs/DVD-Rs.
• The meaning of the icons used in this 
manual is described below:
* MP3 (MPEG1 Audio Layer 3) is a standard 
format defined by ISO (International 
Organization for Standardization)/MPEG which 
compresses audio data.
This Player Can Play the 
Following Discs
“DVD VIDEO” and “DVD-RW” are 
trademarks.
Note about CDs
The player can play CD-ROMs/CD-Rs/CD-
RWs recorded in the following formats:
– music CD format
– video CD format
– MP3 audio tracks and JPEG image files of 
format conforming to ISO 9660* Level 1/
Level 2, or its extended format, Joliet
– KODAK Picture CD format
* A logical format of files and folders on CD-
ROMs, defined by ISO (International 
Organization for Standardization).
Icons
Meanings
Functions available for DVD 
VIDEOs and DVD+RWs/
DVD+Rs or DVD-RWs/DVD-
Rs in video mode
Functions available for DVD-
RWs in VR (Video Recording) 
mode
Functions available for VIDEO 
CDs (including Super VCDs or 
CD-Rs/CD-RWs in video CD 
format or Super VCD format)
Functions available for Super 
Audio CDs
Functions available for music 
CDs or CD-Rs/CD-RWs in 
music CD format
Functions available for DATA 
CDs (CD-ROMs/CD-Rs/CD-
RWs containing MP3* audio 
tracks and JPEG image files)
Format of discs
DVD VIDEO 
(page 89)
DVD-RW 
(page 89)
Super Audio 
CD (page 89)
VIDEO CD
Music CD
SECTION 1
GENERAL
This section is extracted from  instruction
manual. 2-059-564-11
1-2
DVP-NC875V
11
Index to Parts and Controls
For more information, see the pages indicated in parentheses.
Front panel
A [/1 (on/standby) button (34)
B SUPER AUDIO CD indicator (39, 91) 
Lights up when: 
– playing an HD (High Density) layer of 
Super Audio CDs.
– no disc is inserted.
C MULTI CHANNEL indicator (39, 91) 
Lights up when:
– playing a disc that contains multiple 
audio signal channels.
– no disc is inserted.
D DISC 1 – 5 buttons (35)
E H (play) button (34)
F X (pause) button (35)
G x (stop) button (35)
H ./> (previous/next) buttons (46)
I
 (remote sensor) (18)
J A (open/close) button (34)
K DISC SKIP button (34)
L PROGRESSIVE button/indicator (21) 
Lights up when the player outputs 
progressive signals.
M EXCHANGE button (36)
N Disc tray (34)
O Front panel display (12)
,continued
12
Front panel display
When playing back a DVD VIDEO/DVD-RW
When playing back a VIDEO CD with Playback Control (PBC) (40)
When playing back a Super Audio CD, CD, DATA CD (MP3 audio), or VIDEO CD (without 
PBC)
* When playing the HD layer of Super Audio CDs, the disc type is not displayed.
z
Hint
You can adjust the lighting of the front panel 
display by setting “DIMMER” in “CUSTOM 
SETUP.” (page 80)
Disc type
Current audio signal (53)
Lights up when you can 
change the angle (58)
Playing
status
Playing time of the 
current title (51)
Current disc
All Discs 
Repeat mode 
(44)
Disc numbers (35)
Lights up during Repeat Play (44)
Disc type
Playing 
status
Lights up during A-B Repeat Play (44)
Current disc
Current playing time (51)
Disc numbers (35)
All Discs 
Repeat mode 
(44)
Current playing time (51)
Disc type*
Current track (51)
Lights up during Repeat Play (44)
Playing 
status
Current 
disc
Disc numbers (35)
Lights up when playing 
MP3 audio tracks (64)
All Discs Repeat 
mode (44)
13
Rear panel
A DIGITAL OUT (OPTICAL) jack (26) 
(27) (28)
B DIGITAL OUT (COAXIAL) jack (26) 
(27) (28)
C 5.1CH OUTPUT jacks (28)
D LINE OUT L/R (AUDIO) jacks (25) 
(26) (27)
E LINE OUT (VIDEO) jack (19)
F S VIDEO OUT jack (19)
G COMPONENT VIDEO OUT (Y, P
B
P
R
) jacks (19)
OPTICAL
FRONT
COAXIAL
PCM/DTS/
DOLBY
DIGITAL
DIGITAL
OUT
5.1CH OUTPUT
REAR
CENTER
WOOFER
L
R
AUDIO
R
LINE OUT
S VIDEO
OUT
L
VIDEO
Y
COMPONENT
VIDEO OUT
P
R
P
B
,continued
14
Remote
A TV/DVD switch (74)
B
Z
 OPEN/CLOSE button (35)
C Number buttons (38)
The number 5 button has a tactile dot.*
D CLEAR button (41)
E SUBTITLE button (58)
F AUDIO button (53)
G REPEAT button (44)
H SHUFFLE button (43)
I SA-CD MULTI/2CH button (39)
J SA-CD/CD button (39)
K ./> PREV/NEXT buttons (35)
L
 m/M  
SCAN/SLOW 
buttons (47)
M H PLAY button (34)
The H button has a tactile dot.*
N X PAUSE button (35)
O C/X/x/c buttons (38)
P DISPLAY button (15)
Q TOP MENU button (38)
R [/1 (on/standby) button (34)
S VOL +/– buttons (74)
The + button has a tactile dot.*
T TV/VIDEO/TIME/TEXT button (50)
U DISC SKIP button (34)
V ENTER button (30, 74)
W ANGLE button (58)
X SUR button (54)
Y PICTURE MODE button (59)
Z SEARCH MODE button (47)
wj ALBUM +/– button (35, 64)
wk PICTURE NAVI button (49, 65)
wl ZOOM button (35, 65)
e;
 INSTANT ADVANCE/STEP 
button (35, 47)
ea
 INSTANT REPLAY/STEP 
button (35, 47)
es x STOP button (35)
ed ENTER button (30)
ef O RETURN button (36)
eg MENU button (38) (63)
* Use the tactile dot as a reference when operating 
the player.
Page of 98
Display

Click on the first or last page to see other DVP-NC875V service manuals if exist.