Sony DVP-NC875V Service Manual ▷ View online
1-7
DVP-NC875V
31
H
o
o
kups
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
aspect ratio of the TV to be connected
appears.
7
Press X/x to select the setting that
matches your TV type.
matches your TV type.
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 79)
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 79)
standard TV with a wide-screen mode
• 16:9 (page 79)
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
of jack used to connect your amplifier
(receiver) appears.
9
Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio
connection you selected on pages 25 to
28 (
connection you selected on pages 25 to
28 (
through
).
• If you connect just a TV and nothing
else, select “NO.” Quick Setup is
finished and connections are complete.
finished and connections are complete.
• Select “LINE OUTPUT L/R
(AUDIO).” Quick Setup is finished and
connections are complete.
connections are complete.
• Select “DIGITAL OUTPUT.” The
Setup Display for “DOLBY DIGITAL”
appears.
appears.
or both
and
• Select “DIGITAL & 5.1CH OUTPUT.”
The Setup Display for “DOLBY
DIGITAL” appears.
DIGITAL” appears.
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 26 to
28 (
connection you selected on pages 26 to
28 (
through
).
• D-PCM (page 82)
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 82)
decoder) (page 82)
SCREEN SETUP
TV TYPE:
4:3 LETTER BOX
16:9
4:3 PAN SCAN
OFF
FULL
SCREEN SAVER:
BLACK LEVEL:
BACKGROUND:
BLACK LEVEL
(COMPONENT OUT)
:
4:3 OUTPUT:
4:3 LETTER BOX
Is this player connected to an amplifier
(receiver)? Select the type of jack you
are using.
(receiver)? Select the type of jack you
are using.
LINE OUTPUT L/R(AUDIO)
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
YES
NO
A
D
A
B-1
C-1
B-2
C-2
D-2
D-1
D-1
D-2
B
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
OFF
STANDARD
AUDIO FILTER:
SHARP
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
D-PCM
D-PCM
48kHz/96kHz PCM:
DTS:
DOLBY DIGITAL
B-2
C-2
D-2
,continued
32
11
Press ENTER.
“DTS” is selected.
12
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 26 to
28 (
connection you selected on pages 26 to
28 (
through
).
• D-PCM (page 83)
• DTS (only if the amplifier (receiver)
has a DTS decoder) (page 83)
13
Press ENTER.
◆ When “DIGITAL OUTPUT” is selected
in step 9
• Quick Setup is finished and
in step 9
• Quick Setup is finished and
connections are complete.
◆ When “DIGITAL & 5.1CH OUTPUT” is
selected in step 9
• The Setup Display for “SPEAKER
selected in step 9
• The Setup Display for “SPEAKER
SETUP” appears.
14
Press X/x to select the size of the
center speaker.
If no center speaker is connected, select
“NONE” (page 83).
“NONE” (page 83).
15
Press ENTER.
“REAR” is selected.
16
Press X/x to select the size of the
rear speakers.
If no rear speaker is connected, select
“NONE.”
“NONE.”
17
Press ENTER.
“SUBWOOFER” is selected.
18
Press X/x to select whether or
not you have connected a
subwoofer.
subwoofer.
19
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
and setup operations are complete.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
OFF
STANDARD
AUDIO FILTER:
SHARP
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
D-PCM
D-PCM
48kHz/96kHz PCM:
DTS
DTS:
D-PCM
B
D
B-2
C-2
D-2
SPEAKER SETUP
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
LARGE
LARGE
REAR:
SUBWOOFER:
SUBWOOFER:
LARGE
YES
SMALL
NONE
LARGE
SPEAKER SETUP
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
LARGE
REAR:
SUBWOOFER:
SUBWOOFER:
LARGE(REAR)
YES
LARGE
LARGE(REAR)
LARGE(SIDE)
SPEAKER SETUP
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
LARGE
LARGE
REAR:
SUBWOOFER:
SUBWOOFER:
ENTER
DISPLAY
YES
LARGE(REAR)
NONE
YES
33
H
o
o
kups
Enjoying the surround sound
effects
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 26 to
28 (
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 26 to
28 (
through
). Each of these is the
default setting and does not need to be
adjusted when you first connect the player.
See page 77 for using the Setup Display.
adjusted when you first connect the player.
See page 77 for using the Setup Display.
Audio Connection (pages 26 to 28)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 82).
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 82).
• Set “DIGITAL OUT” to “ON” (page 82).
• Set “DISTANCE,” “LEVEL (FRONT),”
and “LEVEL (REAR)” according to the
connected speakers (page 84).
connected speakers (page 84).
z
Hints
• For connections
Set “48kHz/96kHz PCM” to “96kHz/24bit,” only
if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency
(page 83).
if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency
(page 83).
• For connections
If the sound distorts even when the volume is
turned down, set “AUDIO ATT” to “ON”
(page 81).
turned down, set “AUDIO ATT” to “ON”
(page 81).
B
D
A
B-1
C-1
B-2
C-2
D-2
D-1
B-2
C-2
D-2
B-1
C-1
D-1
34
Playing Discs
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
1
Turn on your TV.
2
Press [/1.
The player turns on.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
TV so that the signal from the
player appears on the TV screen.
◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
4
Press A on the player, and place a
disc on the disc tray.
To place other discs on the tray, press
DISC SKIP and place the discs in the
order you want to play them.
Each time you press DISC SKIP, the disc
tray turns so you can place the discs on
the empty compartments. The player
plays from the last disc placed on the tray.
DISC SKIP and place the discs in the
order you want to play them.
Each time you press DISC SKIP, the disc
tray turns so you can place the discs on
the empty compartments. The player
plays from the last disc placed on the tray.
5
Press H.
The disc tray closes and the player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 38. For VIDEO CDs,
see page 40.
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 38. For VIDEO CDs,
see page 40.
To turn off the player
Press [/1. The player enters standby mode.
z
Hint
You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn this function on or off, set
“AUTO POWER OFF” in “CUSTOM SETUP” to
“ON” or “OFF.”
whenever you leave it in stop mode for more than
30 minutes. To turn this function on or off, set
“AUTO POWER OFF” in “CUSTOM SETUP” to
“ON” or “OFF.”
Note
Super Audio CD audio signals are not output from
the DIGITAL OUT jacks.
the DIGITAL OUT jacks.
H
[/1
DISC SKIP
DISC SKIP
Z
[/1
H
A
With the playback
side facing down
side facing down
Disc
compartment
number
compartment
number
1-8
DVP-NC875V
35
Playing Discs
Additional operations
*1 DVD VIDEOs/DVD-RWs/DVD-Rs only
*2 DVD VIDEOs/DVD-RWs/DVD-Rs/
*2 DVD VIDEOs/DVD-RWs/DVD-Rs/
DVD+RWs only
*3 Video and JPEG pictures only (except
BACKGROUND pictures). You can move the
enlarged picture using
enlarged picture using
C/X/x/c. Depending
upon the contents of the disc, the zoom function
may be canceled automatically when the picture
is moved.
may be canceled automatically when the picture
is moved.
*4 DATA CDs only
z
Hints
• The Instant Replay function is useful when you
want to review a scene or dialogue that you
missed.
missed.
• The Instant Advance function is useful when you
want to pass over a scene that you don’t want to
watch.
watch.
Notes
• You may not be able to use the Instant Replay or
Instant Advance function with some scenes.
• Before loading the discs, a disc number indicator
of an empty compartment may be lit.
To
Operation
Select a disc
Press DISC 1–5 on the
player
player
Stop
Press x
Pause
Press X
Resume play after
pause
pause
Press X or H
Go to the next disc
Press DISC SKIP
Go to the next chapter,
track, or scene in
continuous play mode
track, or scene in
continuous play mode
Press > on the
remote, or briefly
press
remote, or briefly
press
>
on the
player.
Go back to the
previous chapter,
track, or scene in
continuous play mode
previous chapter,
track, or scene in
continuous play mode
Press
.
on the
remote, or briefly
press
press
.
on the
player.
Stop play and remove
the disc
the disc
Press Z
Replay the previous
scene*
scene*
1
Press
(instant replay) during
playback
(instant replay) during
playback
Briefly fast forward
the current scene*
the current scene*
2
Press
(instant advance)
during playback
(instant advance)
during playback
Z
CLEAR
.
/
>
X
H
x
(instant advance)
(instant replay)
ZOOM
ALBUM +/–
DISC SKIP
DISC 1–5
H X x
A
DISC SKIP
.
/
>
Magnify the image*
3
Press ZOOM
repeatedly. Press
CLEAR to cancel.
repeatedly. Press
CLEAR to cancel.
Go to the next or
previous album*
previous album*
4
Press ALBUM + or –
during playback.
during playback.
To
Operation
,continued
36
Replacing discs while playing a
disc (EXCHANGE)
disc (EXCHANGE)
You can open the disc tray while playing a
disc so that you can check which discs are to
be played next and replace discs without
interrupting playback of the current disc.
disc so that you can check which discs are to
be played next and replace discs without
interrupting playback of the current disc.
1
Press EXCHANGE.
The disc tray opens and two disc
compartments appear. Even if the player
is playing a disc, it doesn’t stop playing.
compartments appear. Even if the player
is playing a disc, it doesn’t stop playing.
2
Replace the discs in the
compartments with new ones.
compartments with new ones.
3
Press DISC SKIP.
The disc tray turns and another two disc
compartments appear.
compartments appear.
4
Replace the discs in the
compartments with new ones.
compartments with new ones.
5
Press EXCHANGE.
The disc tray closes.
z
Hint
While the disc tray is open,
– If the playback of the current disc end, the player
– If the playback of the current disc end, the player
stops playing. If the disc is played in One Disc
Repeat Play mode (page 44), the current disc
starts playing again.
Repeat Play mode (page 44), the current disc
starts playing again.
Note
Do not push the disc tray to close in step 5, as you
may damage the player.
may damage the player.
Locking the disc tray (Child
Lock)
Lock)
You can lock the disc tray to prevent children
from opening it.
from opening it.
When the player is in standby mode, press
O
O
RETURN, ENTER, and then [/1 on the
remote.
The player turns on and “LOCKED” appears
on the front panel display. The
on the front panel display. The
A
and
EXCHANGE buttons and Z button on the
player or the remote do not work while the
Child Lock is set.
player or the remote do not work while the
Child Lock is set.
To unlock the disc tray
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 again.
O RETURN, ENTER, and then [/1 again.
Note
Even if you select “RESET” under “SETUP” in the
Control Menu (page 77), the disc tray remains
locked.
Control Menu (page 77), the disc tray remains
locked.
EXCHANGE
DISC SKIP
DISC SKIP
ENTER
[/1
O RETURN
37
Playing Discs
Resuming Playback From
the Point Where You
Stopped the Disc
the Point Where You
Stopped the Disc
(Multi-disc
Resume)
The player stores the point where you stopped
the disc for up to 40 discs and resumes
playback the next time you insert the same
disc. If you store a resume playback point for
the 41st disc, the resume playback point for
the first disc is deleted.
the disc for up to 40 discs and resumes
playback the next time you insert the same
disc. If you store a resume playback point for
the 41st disc, the resume playback point for
the first disc is deleted.
1
While playing a disc, press x to
stop playback.
stop playback.
“RESUME” appears on the front panel
display.
display.
2
Press H.
The player starts playback from the point
where you stopped the disc in step 1.
where you stopped the disc in step 1.
z
Hint
To play from the beginning of the disc, press x
twice, then press H.
twice, then press H.
Notes
• “MULTI-DISC RESUME” in “CUSTOM
SETUP” must be set to “ON” (default) for this
function to work (page 81).
function to work (page 81).
• The point where you stopped playing is cleared
when:
– you change the play mode.
– you change the settings on the Setup Display.
• For DVD-RWs in VR mode, Super Audio CDs,
– you change the settings on the Setup Display.
• For DVD-RWs in VR mode, Super Audio CDs,
CDs, and DATA CDs, the player remembers the
resume playback point for the current disc.
The resume point is cleared when:
resume playback point for the current disc.
The resume point is cleared when:
– you press DISC SKIP or DISC
1–5
.
– you opened the disc tray.
– you disconnect the power cord.
– the player enters standby mode (DATA CD only).
• Resume Play does not work during Shuffle Play
– you disconnect the power cord.
– the player enters standby mode (DATA CD only).
• Resume Play does not work during Shuffle Play
and Program Play.
• This function may not work with some discs.
• If “MULTI-DISC RESUME” in “CUSTOM
• If “MULTI-DISC RESUME” in “CUSTOM
SETUP” is set to “ON” and you playback a
recorded disc such as DVD-RW, the player may
playback other recorded discs from the same
resume point. To play from the beginning, press
x twice and then press H.
recorded disc such as DVD-RW, the player may
playback other recorded discs from the same
resume point. To play from the beginning, press
x twice and then press H.
x
H
38
Using the DVD’s Menu
A DVD is divided into long sections of a
picture or a music feature called “titles.”
When you play a DVD which contains
several titles, you can select the title you want
using the TOP MENU button.
When you play DVDs that allow you to select
items such as language for the sound and
subtitles, select these items using the MENU
button.
picture or a music feature called “titles.”
When you play a DVD which contains
several titles, you can select the title you want
using the TOP MENU button.
When you play DVDs that allow you to select
items such as language for the sound and
subtitles, select these items using the MENU
button.
1
Press TOP MENU or MENU.
The disc’s menu appears on the TV
screen.
The contents of the menu vary from disc
to disc.
screen.
The contents of the menu vary from disc
to disc.
2
Press C/X/x/c or the number
buttons to select the item you want
to play or change.
buttons to select the item you want
to play or change.
If you press the number buttons, the
following display appears.
Press the number buttons to select the
item you want.
following display appears.
Press the number buttons to select the
item you want.
3
Press ENTER.
Selecting “ORIGINAL” or
“PLAY LIST” on a DVD-
RW
“PLAY LIST” on a DVD-
RW
Some DVD-RWs in VR (Video Recording)
mode have two types of titles for playback:
originally recorded titles (ORIGINAL) and
titles that can be created on recordable DVD
players for editing (PLAY LIST). You can
select the type of title to be played.
mode have two types of titles for playback:
originally recorded titles (ORIGINAL) and
titles that can be created on recordable DVD
players for editing (PLAY LIST). You can
select the type of title to be played.
1
Press DISPLAY when the player is
in stop mode.
in stop mode.
The Control Menu appears.
2
Press X/x to select
(ORIGINAL/PLAY LIST), then press
ENTER.
ENTER.
The options for “ORIGINAL/PLAY
LIST” appear.
LIST” appear.
Number
buttons
buttons
ENTER
TOP MENU
MENU
C/X/x/c
1
ENTER
DISPLAY
X/x
1 8 ( 3 4 )
1 2 ( 2 7 )
1
DVD-RW
PLAY LIST
PLAY LIST
ORIGINAL
T 1 : 3 0 : 5 0
1-9
DVP-NC875V
39
Playing Discs
3
Press X/x to select a setting.
• PLAY LIST: plays the titles created
from “ORIGINAL” for editing.
• ORIGINAL: plays the titles originally
recorded.
4
Press ENTER.
Selecting a Playback
Area for a Super Audio
CD
Area for a Super Audio
CD
Selecting a playback area on a 2
channel + Multi-channel Super
Audio CD
channel + Multi-channel Super
Audio CD
Some Super Audio CDs consist of a 2 channel
playback area and a multi-channel playback
area. You can select the playback area you
want to listen to.
playback area and a multi-channel playback
area. You can select the playback area you
want to listen to.
1
Press SA-CD MULTI/2CH when the
player is in stop mode.
player is in stop mode.
The following display appears.
2
Press SA-CD MULTI/2CH repeatedly to
select the item.
select the item.
• MULTI: plays a multi-channel
playback area.
• 2CH: plays a 2 channel playback area.
The “MULTI” indicator in the front
panel display lights up when playing a
multi-channel playback area.
panel display lights up when playing a
multi-channel playback area.
SA-CD
MULTI/2CH
MULTI/2CH
SA-CD/CD
2CH
,continued
40
Selecting a playback layer when
playing a hybrid Super Audio CD
playing a hybrid Super Audio CD
Some Super Audio CDs consist of an HD
layer and a CD layer. You can select the
playback layer you want to listen to.
layer and a CD layer. You can select the
playback layer you want to listen to.
Press SA-CD/CD when the player is in stop
mode.
mode.
Each time you press the button, an HD layer
or a CD layer is alternately selected. When
playing a CD layer, the “CD” indicator in the
front panel display lights up.
or a CD layer is alternately selected. When
playing a CD layer, the “CD” indicator in the
front panel display lights up.
Notes
• For details about Super Audio CD discs, see
page 91.
• Each play mode function works only within the
selected layer or playback area.
Playing VIDEO CDs With
PBC Functions
PBC Functions
(PBC Playback)
PBC (Playback Control) allows you to play
VIDEO CDs interactively by following the
menu on the TV screen.
VIDEO CDs interactively by following the
menu on the TV screen.
1
Start playing a VIDEO CD with PBC
functions.
The menu for your selection appears.
2
Press the number buttons to select
the item number you want.
the item number you want.
3
Press ENTER.
4
Follow the instructions in the
menu for interactive operations.
menu for interactive operations.
Refer to the instructions supplied with the
disc, as the operating procedure may
differ depending on the VIDEO CD.
disc, as the operating procedure may
differ depending on the VIDEO CD.
To return to the menu
Press O RETURN.
Number
buttons
buttons
./>
H
x
ENTER
O RETURN
41
Playing Discs
z
Hint
To play without using PBC, press ./> or the
number buttons while the player is stopped to select
a track, then press H or ENTER.
“Play without PBC” appears on the TV screen and
the player starts continuous play. You cannot play
still pictures such as a menu.
To return to PBC playback, press x twice then
press H.
number buttons while the player is stopped to select
a track, then press H or ENTER.
“Play without PBC” appears on the TV screen and
the player starts continuous play. You cannot play
still pictures such as a menu.
To return to PBC playback, press x twice then
press H.
Note
Depending on the VIDEO CD, “Press ENTER” in
step 3 may appear as “Press SELECT” in the
instructions supplied with the disc. In this case,
press H.
step 3 may appear as “Press SELECT” in the
instructions supplied with the disc. In this case,
press H.
Various Play Mode
Functions
Functions
(Program Play,
Shuffle Play, Repeat Play, A-B Repeat
Play)
You can set the following play modes:
• Program Play (page 41)
• Shuffle Play (page 43)
• Repeat Play (page 44)
• A-B Repeat Play (page 45)
• Program Play (page 41)
• Shuffle Play (page 43)
• Repeat Play (page 44)
• A-B Repeat Play (page 45)
Note
The play mode is canceled when:
– you open the disc tray.
– the player enters standby mode by pressing [/1.
– you open the disc tray.
– the player enters standby mode by pressing [/1.
Creating your own program
(Program Play)
(Program Play)
You can play the contents of a disc in the
order you want by arranging the order of the
titles, chapters, or tracks on the disc to create
your own program. You can program up to 99
titles, chapters, and tracks.
order you want by arranging the order of the
titles, chapters, or tracks on the disc to create
your own program. You can program up to 99
titles, chapters, and tracks.
1
Press DISPLAY.
The Control Menu appears.
2
Press X/x to select
(PROGRAM), then press ENTER.
The options for “PROGRAM” appear.
ENTER
X/x/c
H
DISPLAY
CLEAR
,continued
42
3
Press X/x to select “SET
t
,” then
press ENTER.
4
Press c.
The cursor moves to the title or track row
“T” (in this case, “01”).
“T” (in this case, “01”).
5
Select the title, chapter, or track you
want to program.
want to program.
◆ When playing a DVD VIDEO
For example, select chapter “03” of title
“02.”
Press
For example, select chapter “03” of title
“02.”
Press
X/x to select “02” under “T,” then
press ENTER.
Next, press
X/x to select “03” under “C,”
then press ENTER.
◆ When playing a VIDEO CD, Super
Audio CD, or CD
For example, select track “02.”
Press
Audio CD, or CD
For example, select track “02.”
Press
X/x to select “02” under “T,” then
press ENTER. The track number may be
displayed in 3 digits for a Super Audio
CD.
displayed in 3 digits for a Super Audio
CD.
6
To program other titles, chapters, or
tracks, repeat steps 4 to 5.
tracks, repeat steps 4 to 5.
The programmed titles, chapters, and
tracks are displayed in the selected order.
tracks are displayed in the selected order.
7
Press H to start Program Play.
Program Play begins.
When the program ends, you can restart
the same program again by pressing H.
When the program ends, you can restart
the same program again by pressing H.
To return to normal play
Press CLEAR, or select “OFF” after step 2.
To play the same program again, select “ON”
in step 3 and press ENTER.
To play the same program again, select “ON”
in step 3 and press ENTER.
To change or cancel a program
1
Follow steps 1 to 3 of “Creating your own
program (Program Play).”
program (Program Play).”
OFF
OFF
SET
ON
OFF
SET
ON
PLAY
1 8 ( 3 4 )
1 2 ( 2 7 )
1
T 1 : 3 2 : 5 5
DVD VIDEO
PROGRAM
1. TITLE
ALL CLEAR
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
T
– –
01
02
03
04
05
02
03
04
05
“TRACK” is displayed when you play
a VIDEO CD, Super Audio CD, or CD.
a VIDEO CD, Super Audio CD, or CD.
Titles or tracks
recorded on a disc
recorded on a disc
PROGRAM
1. TITLE – –
ALL CLEAR
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
T
C
ALL
01
02
03
04
05
06
02
03
04
05
06
– –
02
03
04
05
03
04
05
01
Chapters recorded on a disc
PROGRAM
1. TITLE – –
ALL CLEAR
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
C
ALL
03
04
05
06
04
05
06
T
– –
01
02
03
04
05
02
03
04
05
02
01
T
– –
01
02
03
04
05
02
03
04
05
PROGRAM
1. TITLE 0 2 – 0 3
ALL CLEAR
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
Selected title and chapter
PROGRAM
1. TRACK 0 2
ALL CLEAR
2. TRACK – –
3. TRACK – –
4. TRACK – –
5. TRACK – –
6. TRACK – –
3. TRACK – –
4. TRACK – –
5. TRACK – –
6. TRACK – –
7. TRACK – –
0:15:30
– –
01
02
03
04
05
02
03
04
05
T
Selected track
Total time of the programmed tracks
1-10
DVP-NC875V
43
Playing Discs
2
Select the program number of the title,
chapter, or track you want to change or
cancel using
chapter, or track you want to change or
cancel using
X/x and press c. If you
want to delete the title, chapter, or track
from the program, press CLEAR.
from the program, press CLEAR.
3
Follow step 5 for new programming. To
cancel a program, select “--” under “T,”
then press ENTER.
cancel a program, select “--” under “T,”
then press ENTER.
To cancel all of the titles, chapters, or
tracks in the programmed order
tracks in the programmed order
1
Follow steps 1 to 3 of “Creating your own
program (Program Play).”
program (Program Play).”
2
Press
X and select “ALL CLEAR.”
3
Press ENTER.
z
Hint
You can perform Repeat Play or Shuffle Play of
programmed titles, chapters, or tracks. During
Program Play, follow the steps of Repeat Play (page
44) or Shuffle Play (page 43).
programmed titles, chapters, or tracks. During
Program Play, follow the steps of Repeat Play (page
44) or Shuffle Play (page 43).
Notes
• All Discs Repeat is automatically changed into
One Disc Repeat when you set to program play
mode (page 44). You can only program the
contents of the current disc.
mode (page 44). You can only program the
contents of the current disc.
• You cannot use this function with VIDEO CDs
and Super VCDs with PBC playback.
Playing in random order (Shuffle
Play)
Play)
You can have the player “shuffle” titles,
chapters, or tracks. Subsequent “shuffling”
may produce a different playing order.
chapters, or tracks. Subsequent “shuffling”
may produce a different playing order.
1
Press SHUFFLE during playback.
The following display appears.
2
Press SHUFFLE repeatedly to select
the item to be shuffled.
the item to be shuffled.
◆ When playing a DVD VIDEO
• TITLE
• CHAPTER
◆ When playing a VIDEO CD,Super
Audio CD, or CD
• TRACK
◆ When Program Play is activated
• ON: shuffles titles, chapters, or tracks
• TITLE
• CHAPTER
◆ When playing a VIDEO CD,Super
Audio CD, or CD
• TRACK
◆ When Program Play is activated
• ON: shuffles titles, chapters, or tracks
selected in Program Play.
To return to normal play
Press CLEAR, or select “OFF” in step 2.
z
Hints
• You can set Shuffle Play while the player is
stopped. After selecting the “SHUFFLE” option,
press H. Shuffle Play starts.
press H. Shuffle Play starts.
• Up to 200 chapters in a disc can be played in
random order when “CHAPTER” is selected.
Notes
• You cannot use this function with VIDEO CDs
and Super VCDs with PBC playback.
• All Discs Repeat is automatically changed into
One Disc Repeat when you set to shuffle play
mode. You can only shuffle the contents of the
current disc.
mode. You can only shuffle the contents of the
current disc.
H
CLEAR
SHUFFLE
TITLE
,continued
44
Playing repeatedly (Repeat Play)
You can play all of the titles or tracks on a
disc, or a single title, chapter, or track
repeatedly.
You can use a combination of Shuffle or
Program Play modes.
disc, or a single title, chapter, or track
repeatedly.
You can use a combination of Shuffle or
Program Play modes.
1
Press REPEAT during playback.
The following display appears.
2
Press REPEAT repeatedly to select the
item to be repeated.
item to be repeated.
◆ When playing a DVD VIDEO
• ALL DISCS: repeats all of the discs.
• ONE DISC: repeats all of the titles on
• ALL DISCS: repeats all of the discs.
• ONE DISC: repeats all of the titles on
the current disc.
• TITLE: repeats the current title on a
disc.
• CHAPTER: repeats the current chapter.
◆ When playing a DVD-RW
• ALL DISCS: repeats all of the discs.
• ONE DISC: repeats all of the titles of
◆ When playing a DVD-RW
• ALL DISCS: repeats all of the discs.
• ONE DISC: repeats all of the titles of
the selected type.
• TITLE: repeats the current title on a
disc.
• CHAPTER: repeats the current chapter.
◆ When playing a VIDEO CD, Super
Audio CD, or CD
• ALL DISCS: repeats all of the discs.
• ONE DISC: repeats all of the tracks on
Audio CD, or CD
• ALL DISCS: repeats all of the discs.
• ONE DISC: repeats all of the tracks on
the current disc.
• TRACK: repeats the current track.
◆ When playing a DATA CD with MP3
audio tracks or JPEG image files
• ALL DISCS: repeats all of the discs.
• ONE DISC: repeats all of the albums on
◆ When playing a DATA CD with MP3
audio tracks or JPEG image files
• ALL DISCS: repeats all of the discs.
• ONE DISC: repeats all of the albums on
the current disc.
• ALBUM: repeats the current album.
• TRACK (MP3 audio tracks only):
• TRACK (MP3 audio tracks only):
repeats the current track.
◆ When Program Play or Shuffle Play is
activated
• ON: repeats Program Play or Shuffle
activated
• ON: repeats Program Play or Shuffle
Play.
To return to normal play
Press CLEAR, or select “OFF” in step 2.
z
Hint
You can set Repeat Play while the player is stopped.
After selecting the “REPEAT” option, press H.
Repeat Play starts.
After selecting the “REPEAT” option, press H.
Repeat Play starts.
Notes
• You cannot use this function with VIDEO CDs
and Super VCDs with PBC playback.
• When repeating a DATA CD which contains MP3
audio tracks and JPEG image files, and their
playing times are not the same, the sound will not
match the image.
playing times are not the same, the sound will not
match the image.
• When “MODE (MP3, JPEG)” is set to “IMAGE
(JPEG)” (page 67), you cannot select “TRACK.”
H
CLEAR
REPEAT
ALL DISCS
45
Playing Discs
Repeating a specific portion (A-
B Repeat Play)
B Repeat Play)
You can play a specific portion of a title,
chapter or track repeatedly. (This function is
useful when you want to memorize lyrics,
etc.)
chapter or track repeatedly. (This function is
useful when you want to memorize lyrics,
etc.)
1
Press DISPLAY during playback.
The Control Menu appears.
2
Press X/x to select
(A-B
REPEAT), then press ENTER.
The options for “A-B REPEAT” appear.
3
Press X/x to select “SET t,” then
press ENTER.
press ENTER.
The “A-B REPEAT” setting bar appears.
4
During playback, when you find the
starting point (point A) of the portion to
be played repeatedly, press ENTER.
starting point (point A) of the portion to
be played repeatedly, press ENTER.
The starting point (point A) is set.
5
When you reach the ending point
(point B), press ENTER again.
(point B), press ENTER again.
The set points are displayed and the
player starts repeating this specific
portion.
player starts repeating this specific
portion.
To return to normal play
Press CLEAR, or select “OFF” in step 3.
Notes
• When you set A-B Repeat Play, the settings for
Shuffle Play, Repeat Play, and Program Play are
canceled.
canceled.
• A-B Repeat Play does not work across multiple
titles.
• You cannot set A-B Repeat Play for contents on a
DVD-RW (VR mode) that contains still pictures.
CLEAR
ENTER
DISPLAY
X/x
PLAY
SET
OFF
OFF
OFF
1 8 ( 3 4 )
1 2 ( 2 7 )
1
T 1 : 3 2 : 5 5
DVD VIDEO
A 18 - 1:32:30
B
A 18 - 1:32:30
B 18 - 1:33:05
46
Searching for a Scene
Searching for a
Particular Point on a
Disc
Particular Point on a
Disc
(Search, Scan, Slow-motion
Play, Freeze Frame)
You can quickly locate a particular point on a
disc by monitoring the picture or playing back
slowly.
disc by monitoring the picture or playing back
slowly.
Notes
• Depending on the disc, you may not be able to do
some of the operations described.
• For DATA CDs, you can search for a particular
point only on an MP3 audio track.
Locating a point quickly using
the previous/next buttons
the previous/next buttons
You can search for the next or previous
chapter, track, or scene using ./> on
the player.
During playback, press > or . once
briefly to go to the next or previous chapter/
track/scene. Or, press and hold > or .
to search forward or backwards, and release
the button when you find the point you want
to return to normal playback. (Search)
chapter, track, or scene using ./> on
the player.
During playback, press > or . once
briefly to go to the next or previous chapter/
track/scene. Or, press and hold > or .
to search forward or backwards, and release
the button when you find the point you want
to return to normal playback. (Search)
Locating a point quickly by
playing a disc in fast forward or
fast reverse (Scan)
playing a disc in fast forward or
fast reverse (Scan)
Press
m or M
while playing a
disc. When you find the point you want, press
H to return to normal speed. Each time you
press
H to return to normal speed. Each time you
press
m or M
during scan, the
scan speed changes. With each press the
indication changes as shown below. Actual
speeds may differ between discs.
indication changes as shown below. Actual
speeds may differ between discs.
Playback direction
Opposite direction
The “
u2B”/ “u2b” playback speed is about
twice the normal speed.
The “3M”/“3m” playback speed is faster
than “2M”/“2m” and the “2M”/“2m”
playback speed is faster than “1M”/
“1m.”
The “3M”/“3m” playback speed is faster
than “2M”/“2m” and the “2M”/“2m”
playback speed is faster than “1M”/
“1m.”
m/
M
H
H
./
>
>
u2B t 1M t 2M t 3M
3M (DVD VIDEO/DVD-RW/VIDEO CD only)
u2B (DVD VIDEO/Super Audio CD/CD only)
u2B (DVD VIDEO/Super Audio CD/CD only)
u2b t 1m t 2m t 3m
3m (DVD VIDEO/DVD-RW/VIDEO CD only)
u2b (DVD VIDEO only)
u2b (DVD VIDEO only)
Click on the first or last page to see other DVP-NC875V service manuals if exist.