DOWNLOAD Sony DVP-NC625 / DVP-NC665P / HT-6600DP Service Manual ↓ Size: 7.95 MB | Pages: 127 in PDF or view online for FREE

1-7

You can open the disc tray while playing a 
disc so that you can check which discs are to 
be played next and replace discs without 
interrupting playback of the current disc.

Press EXCHANGE.
The disc tray opens and two disc 
compartments appear. Even if the player 
is playing a disc, it doesn’t stop playing.

Press DISC SKIP.
The disc tray turns and another two disc 
compartments appear.

Press EXCHANGE.
The disc tray closes.

z

While the disc tray is open,
– If the playback of the current disc end, the player 

stops playing. If the disc is played in One Disc 

Repeat Play mode (page 39), the current disc 
starts playing again.

– In All Discs Shuffle Play mode (page 38), titles/

tracks/chapters are reshuffled only on the current 
disc.

– In Program Play mode (page 36), the titles/tracks/

chapters only on the current disc are played.

Do not push the disc tray to close in Step 5, as you 
may damage the player.

You can lock the disc tray to prevent children 
from opening it.

When the player is in standby mode, press 
O

RETURN, ENTER, and then [/1 on the 

remote.
The player turns on and “LOCKED” appears 
on the front panel display.
The A and EXCHANGE buttons on the 
player and the Z button on the remote do not 
work while the Child Lock is set.

To unlock the disc tray
When the player is in standby mode, press 
O RETURN, ENTER, and then [/1 again. 

Even if you select “RESET” under “SETUP” in the 
Control Menu (page 64), the disc tray remains 
locked.

The player remembers the point where you 
stopped the disc.

The player remembers the point where you 
stopped the disc even if the player enters 
standby mode by pressing [/1.

While playing a disc, press x to 
stop playback.

“RESUME” appears on the front panel 
display.

Press H.

The player starts playback from the point 
where you stopped the disc in step 1.

z

To play from the beginning of the disc, press x 
twice, then press H.

• The point where you stopped playing is cleared 

when:

– you change the play mode.
– you do Program Play or Shuffle Play.
– you change the settings on the Setup Display.
• When playing a CD and DVD-RW (VR mode), 

the point where you stopped is cleared when:

– you press DISC SKIP or DISC SELECT.
– you opened the disc tray.
– you disconnect the power cord.
• When playing a DATA CD, the point where you 

stopped playing is cleared when the player enters 
standby mode, the disc tray is opened, or the 
power cord is disconnected.

• This function may not work with some discs.

The player stores the point where you stopped 
the disc and resumes playback from the same 
point the next time you insert the same disc. 
The player remembers the stopped point of 
the disc even after you play other discs in the 
disc tray.
Resume playback points for up to 6 different 
DVD VIDEO/VIDEO CD discs remain in 
memory even if you disconnect the power 
cord. When you store a resume playback 
point for the 7th disc, the resume playback 
point for the first disc is deleted.

z

• To play from the beginning of the disc, press x 

twice, then press H.

• To turn off the Multi-disc Resume function, set 

“MULTI-DISC RESUME” in “CUSTOM 
SETUP” to “OFF” (page 67). Playback restarts at 
the resume point only for the current disc in the 
player.

• “MULTI-DISC RESUME” in “CUSTOM 

SETUP” must be set to “ON” (default) for this 
function to work (page 67).

• This function may not work with some discs.
• If “MULTI-DISC RESUME” in “CUSTOM 

SETUP” is set to “ON” and you playback a 
recorded disc such as DVD-RW, the player may 
playback other recorded discs from the same 
resume point. To play from the beginning, press 
x twice and then press H.

A DVD is divided into long sections of a 
picture or a music feature called “titles.” 
When you play a DVD which contains 
several titles, you can select the title you want 
using the TOP MENU button.
When you play DVDs that allow you to select 
items such as the language for the subtitles 
and the language for the sound, select these 
items using the MENU button.

The disc’s menu appears on the TV screen.
The contents of the menu vary from disc 
to disc.

Press C/X/x/c or the number 
buttons to select the item you want 
to play or change.

If you press the number buttons, the 
following display appears.
Press the number buttons to select the 
item you want.

Some DVD-RW discs in VR (Video 
Recording) mode have two types of titles for 
playback: originally recorded titles 
(ORIGINAL) and titles that can be created on 
recordable DVD players for editing (PLAY 
LIST). You can select the type of titles to be 
played.

The Control Menu appears.

Press X/x to select 

The options for “ORIGINAL/PLAY 
LIST” appear.

Number 
buttons

1

ENTER

DISPLAY

1 8 ( 3 4 )

1 2 ( 2 7 )

DVD-RW

        

PLAY LIST

PLAY LIST

ORIGINAL

1

STOP

c continued

Press X/x to select the setting.

• PLAY LIST: plays the titles created 

from “ORIGINAL” for editing.

• ORIGINAL: plays the titles originally 

recorded.

To turn off the Control Menu
Press DISPLAY repeatedly until the Control 
Menu is turned off.

PBC (Playback Control) allows you to play 
VIDEO CDs interactively by following the 
menu on the TV screen.

The menu for your selection appears.

Select the item number and track 
you want using X/x or the number 
buttons.

Refer to the instructions supplied with the 
disc, as the operating procedure may 
differ depending on the VIDEO CD.

To return to the menu
Press O RETURN.

Number 
buttons

1-8

z

To play without using PBC, press ./> while 
the player is stopped to select a track, then press H 
or ENTER.
“Play without PBC.” appears on the TV screen and 
the player starts continuous play. You cannot play 
still pictures such as a menu. 
To return to PBC playback, press x twice then 
press H.

• Depending on the VIDEO CD, “Press ENTER” in 

step 3 may appear as “Press SELECT” in the 
instructions supplied with the disc. In this case, 
press H.

• The PBC functions of Super VCDs do not work 

with this player. Super VCDs are played in 
continous play mode only.

You can play back DATA CDs (CD-ROMs/
CD-Rs/CD-RWs) recorded in MP3 (MPEG1 
Audio Layer 3) format.

Press Z and place a DATA CD on 
the disc tray.

Press H.

The disc tray closes, and the player starts 
to play the first MP3 audio track in the 
first album on the disc.

• This player can play MP3 audio tracks recorded in 

the following sampling frequencies: 
32 kHz, 44.1 kHz, 48 kHz.

• The playback order may be different from the 

edited order. See “The playback order of MP3 
audio tracks” (page 35) for details.

c continued

The list of MP3 albums recorded on the 
DATA CD appears.

Select an album using X/x and 
press ENTER.

The list of tracks contained in the album 
appears.

Select a track using X/x and press 
ENTER.

The selected track starts playing. 
When a track or album is being played, its 
title is shaded.

To go to the next or previous page
Press 

c or C.

To return to the previous display
Press O RETURN.

To turn off the display
Press MENU.

• Only the letters in the alphabet and numbers can 

be used for album or track names. Anything else 
is displayed as “*”.

• ID3 tags cannot be displayed.

You can play MP3 audio tracks on CD-ROMs 
or CD-Rs/CD-RWs. However, the discs must 
be recorded according to ISO9660 level 1, 
level 2, or Joliet format for the player to 
recognize the tracks.
You can also play discs recorded in Multi 
Session.
See the instructions of the CD-R/CD-RW 
device or recording software (not supplied) 
for details on the recording format.

To play a Multi Session CD
This player can play Multi Session CDs when 
an MP3 audio track is located in the first 
session. Any subsequent MP3 audio tracks, 
recorded in the later sessions, can also be 
played back.
When audio tracks and images in music CD 
format or Video CD format are recorded in 
the first session, only the first session will be 
played back.

• If you put the extension “.MP3” to data not in 

MP3 format, the player cannot recognize the data 
properly and will generate a loud noise which 
could damage your speaker system.

• The player cannot play audio tracks in MP3PRO 

format.

        1 (   3 0 )

R O C K   B E S T   H I T
K A R A O K E
J A Z Z
R & B
M Y   F A V O R I T E   S O N G S
C L A S S I C A L
S A L S A   O F   C U B A
B O S S A N O V A

            J A Z Z
            1 (  90 )

0 1 S H E   I S   S P E C I A L
0 2 A L L   Y O U   N E E D   I S   . . .
0 3 S P I C Y   L I F E
0 4 H A P P Y   H O U R
0 5 R I V E R   S I D E
0 6                       5
0 7 T A K E   T I M E , T A K E   T I M E

The playback order of MP3 audio tracks
The playback order of albums and tracks 
recorded on a DATA CD is as follows.
◆Structure of disc contents

When you insert a DATA CD and press H, 
the numbered tracks are played sequentially, 
from 

1

 through 

7

. Any sub-albums/tracks 

contained within a currently selected album 
take priority over the next album in the same 
tree. (Example: C contains D so 

4

 is played 

before 

5

.)

When you press MENU and the list of MP3 
albums appears (page 34), the albums are 
arranged in the following order: A 

t B t 

C

 

t D t F t G. Albums that do not 

contain tracks (such as album E) do not 
appear in the list.

z

• If you add numbers (01, 02, 03, etc.) to the front 

of the track names, the tracks will be played in 
that order.

• Since a disc with many trees takes longer to start 

playback, it is recommended that you create the 
albums no more than two trees.

• Depending on the software you use to create the 

DATA CD, the playback order may differ from 
the illustration above.

• The playback order above may not be applicable 

if there are more than a total of 999 albums and 
tracks in the DATA CD.

• The player can recognize up to 499 albums (the 

player will count just albums, including albums 
that do not contain MP3 audio tracks). The player 
will not play any albums beyond the first 499 
albums. Of the first 499 albums, the player will 
play no more than a combined total of 999 albums 
and tracks.

ROOT

Tree 1

Tree 2

Tree 3

Tree 4

Tree 5

album

track

You can set the following play modes:
• Program Play (page 36)
• Shuffle Play (page 38)
• Repeat Play (page 39)
• A-B Repeat Play (page 40)

The play mode is canceled when:
– you open the disc tray.
– the player enters standby mode by pressing [/1.

You can play one disc or all of the discs in the 
player. Before setting Program Play, Shuffle 
Play, or Repeat Play, you must select whether 
to set those play mode on one disc or all of the 
discs.

Press DISPLAY once or twice.
The following Control Menu appears.

Press X/x to select 

z

You can select “ALL DISCS” or “ONE DISC” by 
pressing ONE/ALL button on the player. Each time 
you press the button, the disc mode changes 
alternately.

You can play the contents of a disc in the 
order you want by arranging the order of the 
titles, chapters, or tracks on the disc to create 
your own program.
You can program up to 99 items. By selecting 
All Discs mode (page 36), you can create a 
program for all of the discs in the player.

Press DISPLAY twice.
The Control Menu appears.

Press X/x to select 

(PROGRAM), then press ENTER.
The options for “PROGRAM” appear.

ONE/ALL

ENTER

DISPLAY

1 8 ( 3 4 )

1 2 ( 2 7 )

DVD-VIDEO

STOP

ALL DISCS

ALL DISCS

ONE DISC

Number 
buttons

1-9

Press X/x to select “SET t” then 
press ENTER.
The display for programming appears.

Press c.
The player is ready to program the first 
disc.

Select the disc you want to program 
using the number buttons or X/x, then 
press ENTER.
The cursor moves to the title or track row 
“T” (in this case, “01”).

Select the title, chapter, or track you 
want to program.
◆ When playing a DVD VIDEO
For example, select chapter “03” of title 
“02.”
Press 

X/x or the number buttons to select 

“02” under “T,” then press ENTER.

Next, press 

X/x or the number buttons to 

select “03” under “C,” then press 
ENTER.

◆ When playing a VIDEO CD or CD
For example, select track “02.”
Press 

X/x or the number buttons to select 

“02” under “T,” then press ENTER.

To program other discs, titles, 
chapters, or tracks, repeat steps 4 to 
6.
The programmed discs, titles, chapters, 
and tracks are displayed in the selected 
order.

OFF
OFF
SET
ON

1 8 ( 3 4 )

1 2 ( 2 7 )

DVD VIDEO

STOP

PROGRAM

– : – – – –

1. – – – – –

ALL CLEAR

2. – – – – –
3. – – – – –
4. – – – – –
5. – – – – –
6. – – – – –

T

ALL

PROGRAM

– : – – – –

1. – – – – –

ALL CLEAR

2. – – – – –
3. – – – – –
4. – – – – –
5. – – – – –
6. – – – – –

T

ALL

2. – – – – –
3. – – – – –
4. – – – – –
5.

 – – – – –

6. – – – – –

C

ALL

01
02
03
04
05

01
02
03
04
05
06

06

PROGRAM

3 : DVD

1. – – – – –

ALL CLEAR

T

ALL

Chapters recorded on a disc

Titles or tracks 
recorded on a disc

Disc type

“?” appears when the player has not played 
the disc.

2. – – – – –
3. – – – – –
4. – – – – – 
5. – – – – –
6. – – – – –

C

ALL

01
02
03
04
05

01
02
03
04
05
06

06

PROGRAM

3 : DVD

1. – – – – –

ALL CLEAR

T

ALL

1. 3DVD  –T02–C03

PROGRAM

– : – – – –

ALL CLEAR

T

ALL

2. – – – – –
3. – – – – –
4. – – – – –
5. – – – – –
6. – – – – –

Selected disc, title and chapter

1. 3DVD  –T02–C03

PROGRAM

– : – – – –

ALL CLEAR

T

ALL

2. 2VCD  –T02
3. – – – – –
4. – – – – –
5. – – – – –
6. – – – – –

0:15:30

Selected disc and track

c continued

Press H to start Program Play.
Program Play begins.
When the program ends, you can restart 
the same program again by pressing H.

To stop Program Play
Press CLEAR or select “OFF” in Step 3.

To turn off the display
Press DISPLAY repeatedly until the display 
is turned off.

Follow steps 1 and 2 of “Creating your 
own program (Program Play).”

Select the program number of the disc, 
title, chapter, or track you want to cancel 
or change using 

X/x or the number 

buttons, and press 

c.

To cancel the program, press 

C then 

CLEAR.
To change the program, follow step 4 for 
new programming.

Follow steps 1 and 2 of “Creating your 
own program (Program Play).”

Press 

X and select “ALL CLEAR.”

Press ENTER.

z

You can do Repeat Play or Shuffle Play of the 
programmed titles, chapters, or tracks. During 
Program Play, follow the steps of “Repeat Play” 
(page 39) or “Shuffle Play” (page 38).

• You cannot use this function with VIDEO CDs 

with PBC playback.

• When playing Super VCDs, the total time of the 

programmed tracks does not appear on the screen.

You can have the player “shuffle” titles, 
chapters, or tracks. Subsequent “shuffling” 
may produce a different playing order. By 
selecting All Discs mode (page 36), you can 
shuffle all of the discs in the player.

Press DISPLAY twice during playback 
(when playing a DATA CD, press once).
The Control Menu appears.

Press X/x to select 

(SHUFFLE), then press ENTER.
The options for “SHUFFLE” appear.

Press X/x to select the item to be 
shuffled.
◆ When playing a DVD VIDEO
• DISC*
• TITLE
• CHAPTER
◆ When playing a VIDEO CD or CD
• DISC*
• TRACK
◆ When playing a DVD-RW or DATA CD
• DISC*
◆ When Program Play is activated
• ON: shuffles titles, chapters, or tracks 

selected in Program Play.

ENTER

1 8 ( 3 4 )

1 2 ( 2 7 )

OFF

CHAPTER

TITLE

OFF

DVD VIDEO

PLAY

Press ENTER.
Shuffle Play starts.

* You can select “DISC” in All Discs mode only.

To return to normal play
Press CLEAR, or select “OFF” in step 2.

To turn off the control menu
Press DISPLAY repeatedly until the Control 
Menu is turned off.

z

• You can set Shuffle Play while the player is 

stopped. After selecting the “SHUFFLE” option, 
press H. Shuffle Play starts.

• Up to 96 chapters in a disc can be played in 

random order when “CHAPTER” is selected.

You cannot use this function with VIDEO CDs with 
PBC playback.

You can play all of the titles, albums or tracks 
on a disc or a single title, chapter, album, or 
track repeatedly.
You can use a combination of Shuffle or 
Program Play modes. By selecting All Discs 
mode (page 36), you can repeat all of the 
discs in the player.

Press REPEAT during playback.
The following display appears.

Press REPEAT repeatedly to select the 
item to be repeated.
◆ When playing a DVD VIDEO
• DISC: repeats all of the titles on the 

current disc in One Disc mode, or all of 
the discs in All Discs mode.

• TITLE: repeats the current title on a 

disc.

• CHAPTER: repeats the current 

chapter.

◆ When playing a DVD-RW
• DISC: repeats all of the titles on the 

selected type in One Disc mode, or all 
of the discs in All Discs mode.

• TITLE: repeats the current title on a 

disc.

• CHAPTER: repeats the current 

chapter.

◆ When playing a VIDEO CD or CD 
• DISC: repeats all of the tracks on the 

current disc in One Disc mode, or all of 
the discs in All Discs mode.

• TRACK: repeats the current track.
◆ When playing a DATA CD (MP3 audio)
• DISC: repeats all of the albums on the 

current disc in One Disc mode, or all of 
the discs in All Discs mode.

• ALBUM: repeats the current album.
• TRACK: repeats the current track.
◆ When Program Play or Shuffle Play is 
activated
• ON: repeats Program Play or Shuffle 

Play.

To return to normal play
Press CLEAR, or select “OFF” in step 2.

z

• You can set Repeat Play while the player is 

stopped. After selecting the “REPEAT” option, 
press H. Repeat Play starts.

• You can also select “REPEAT” from the Control 

Menu (page 12).

You cannot use this function with VIDEO CDs with 
PBC playback.

DISC

c continued

You can play a specific portion of a title, 
chapter or track repeatedly. (This function is 
useful when you want to memorize lyrics, etc.)

Press DISPLAY twice during playback.
The Control Menu appears.

Press X/x to select 

REPEAT), then press ENTER.
The options for “A-B REPEAT” appear.

Press X/x to select “SET t,” then 
press ENTER.
The “A-B REPEAT” setting display 
appears.

During playback, when you find the 
starting point (point A) of the portion to 
be played repeatedly, press ENTER.
The starting point (point A) is set.

When you reach the ending point 
(point B), press ENTER again.
The set points are displayed and the 
player starts repeating this specific 
portion.

To return to normal play
Press CLEAR.

To turn off the Control Menu
Press DISPLAY repeatedly until the Control 
Menu is turned off.

• When you set A-B Repeat Play, the settings for 

Shuffle Play, Repeat Play, and Program Play are 
canceled.

• A-B Repeat Play does not work for titles 

containing still pictures on a DVD-RW in VR 
mode.

• A-B Repeat Play does not work across multiple 

titles (“ORIGINAL” or “PLAY LIST”) on a 
DVD-RW in VR mode.

SET
OFF

OFF

1 8 ( 3 4 )

1 2 ( 2 7 )

DVD VIDEO

        

PLAY

  Set point A with   

             .

A-B REPEAT

ENTER

A:  18  –   1 : 32 : 55

CHAPTER    TIME   

  Set point B with             .

ENTER

A-B REPEAT

1 8 ( 3 4 )

1 2 ( 2 7 )

DVD VIDEO

PLAY

A:  18  –   1 : 32 : 55
B:  18  –   1 : 34 : 30

CHAPTER    TIME   

ON

1-10

You can quickly locate a particular point on a 
disc by monitoring the picture or playing back 
slowly.

Depending on the DVD/VIDEO CD, you may not 
be able to do some of the operations described.

Press  

m or M 

 while playing a 

disc. When you find the point you want, press 
H to return to normal speed. Each time you 
press  

m or M 

 during scan, the 

playback speed changes. With each press the 
indication changes as shown below. Actual 
speeds may differ with some discs.

Playback direction

Opposite direction

The “

×

2B”/“

×

2b” playback speed is about 

twice the normal speed. The “FF3M”/
“FR3m” playback speed is faster than the 
“FF2M”/“FR2m” and the “FF2M”/
“FR2m” playback speed is faster than 
FF1M”/FR1m.”

Press  

m or M 

 when the player is 

in pause mode. To return to the normal speed, 
press H.
Each time you press 

 m or M 

 

during Slow-motion play, the playback speed 
changes. Two speeds are available. With each 
press the indication changes as follows:

Playback direction

 

SLOW2 

 

y SLOW1 

Opposite direction (DVD only)

SLOW2 

 

y SLOW1 

The “SLOW2 y”/“SLOW2 

” playback 

speed is slower than “SLOW1 y”/“SLOW1 

.”

You can search for a particular point on a disc 
using . / > on the player.
During playback, press and hold > on the 
player to locate a point in the playback 
direction, or press and hold . to locate a 
point in the opposite direction. When you find 
the point you want, release the button to 
return to normal playback speed.

STEP

STEP

×2B t FF1M t FF2M t FF3M

FF3M (DVD VIDEO/DVD-RW/
VIDEO CD only)
×2B (DVD VIDEO/CD only)

×2b t FR1m t FR2m t FR3m

FR3m (DVD VIDEO/DVD-RW/
VIDEO CD only)
×2b (DVD VIDEO only)

c continued

When the player is in the pause mode, press 

 to go to the next frame. Press 
 to go to the preceding frame (DVD 

only). If you hold the button down, you can 
view the frames in succession. To return to 
normal playback, press H.

You can search a DVD by title or chapter, and 
you can search a VIDEO CD/CD by track, 
index, or scene. As titles and DATA CD 
tracks are assigned unique numbers on the 
disc, you can select the desired one by 
entering its number. Or, you can search for a 
scene using the time code.

The Control Menu appears.

Press X/x to select the search 
method.

◆ When playing a DVD VIDEO/DVD-RW

 

DISC

 

TITLE

 

CHAPTER

 

TIME/TEXT

Select “TIME/TEXT” to search for a 
starting point by inputting the time code.
◆ When playing a VIDEO CD without PBC 
Playback

 

DISC

 

TRACK

 

INDEX

Number 
buttons

◆ When playing a VIDEO CD with PBC 
Playback

 

DISC

 

SCENE

 

INDEX

◆ When playing a CD

 

DISC

 

TRACK

 

INDEX

◆ When playing a DATA CD (MP3 audio)

 

DISC

 ALBUM

 TRACK

Example: when you select 

 

CHAPTER
“** (**)” is selected (** refers to a number).
The number in parentheses indicates the total 
number of titles, chapters, tracks, indexes or 
scenes.

“** (**)” changes to “-- (**).”

Press X/x or the number buttons 
to select the title, chapter, track, 
index, or scene number you want 
to search.

If you make a mistake
Cancel the number by pressing CLEAR, 
then select another number.

If you make a mistake
Cancel the number by pressing CLEAR, 
then select another number.

The player starts playback from the 
selected number.

In Step 2, select 

 TIME/TEXT.

“T **:**:**” (playing time of the current 
title) is selected.

Press ENTER.
“T **:**:**” changes to “T --:--:--.”

Input the time code using the number 
buttons, then press ENTER.
For example, to find the scene at 2 hours, 
10 minutes, and 20 seconds after the 
beginning, just enter “2:10:20.”

z

• When the display is turned off you can search for 

a chapter (DVD VIDEO/DVD-RW) or track (CD) 
by pressing the number buttons and ENTER.

• You can display the first scene of titles, chapters 

or tracks recorded on the disc on a screen divided 
into 9 sections. You can start playback directly by 
selecting one of the scenes. For details, see 
“Searching by Scene (PICTURE 
NAVIGATION)” (page 44).

• You cannot search for a scene on a DVD+RW 

using the time code.

• The title, chapter or track number displayed is the 

same number recorded on the disc.

• You cannot search for a still picture on a DVD-

RW in VR mode.

DVD VIDEO

PLAY

1 8 ( 3 4 )

1 2 ( 2 7 )

1

T       1 : 3 2 : 5 5

Selected row

DVD VIDEO

 ( 3 4 )

1 2 ( 2 7 )

1

T       1 : 3 2 : 5 5

PLAY

You can divide the screen into 9 subscreens 
and find the desired scene quickly.

The following display appears.

• Refer to the explanations given for each 

item in the following sections.

• CHAPTER VIEWER (for DVD 

VIDEO only)

• TITLE VIEWER (for DVD VIDEO 

only)

• TRACK VIEWER (for VIDEO CD 

only)

To return to normal play
Press O RETURN.

z

You can also select “PICTURE NAVIGATION” 
from the Control Menu (page 12).

• The “PICTURE NAVIGATION” is not available 

when playing Super VCDs.

• Depending on the disc, you may not be able to 

select all functions.

• The sound is muted when using this function.

You can divide the screen into 9 subscreens 
and display the first scene of titles, chapters, 
or tracks.

You can also play back from the selected title, 
chapter, or track. After performing step 3 of 
“Searching by Scene (PICTURE 
NAVIGATION)” above, select the scene 
using 

C/X/x/c and press ENTER.

z

If there are more than 9 titles, chapters, or tracks, V 
is displayed at the bottom right.
To display the additional titles, chapters, or tracks, 
select the bottom right scene (the position 9) and 
press 

x. To return to the previous scene, select the 

top left scene (the position 1) and press 

X.

CHAPTER VIEWER

ENTER

1

4

7

2

5

8

3

6

9