Sony DVP-F41MS Service Manual ▷ View online
1-18
74
To go to the next or previous page
Press
c or C.
To return to the previous display
Press
ORETURN.
To turn off the display
Press MENU.
To switch to disc mode
Press MS. The MS indicator goes out.
z
By pressing MENU, you can display the track list
when the player is stopped.
Notes
• Only the letters in alphabet and numbers in the
album/track names can be displayed. Other
characters appear as an “*” (asterisk).
characters appear as an “*” (asterisk).
• MS mode will be released when:
– the player enters standby mode
– the power cord is disconnected
– the power cord is disconnected
Playing a track with a playback
period restriction (DATE/TIME
SETUP)
period restriction (DATE/TIME
SETUP)
Set the current date and time so that you can
play an audio track with a playback period
restriction recorded on an “MG Memory
Stick.”
play an audio track with a playback period
restriction recorded on an “MG Memory
Stick.”
1
Press DISPLAY when the player is in
stop mode.
The Control Menu appears.
stop mode.
The Control Menu appears.
2
Press
X/x to select
(SETUP),
then press ENTER.
3
Press
X/x to select “CUSTOM,” then
press ENTER.
The Setup Display appears.
The Setup Display appears.
4
Press
X/x to select “CUSTOM SETUP,”
then press ENTER.
The “CUSTOM SETUP” display
appears.
The “CUSTOM SETUP” display
appears.
5
Press
X/x to select “DATE/TIME SETUP
t,” then press ENTER.
The “DATE/TIME SETUP” display
appears.
The “DATE/TIME SETUP” display
appears.
6
Press
X/x to select a figure, then press
c.
The “Y (year)” is set, and the next item
“M (month)” will be highlighted.
The “Y (year)” is set, and the next item
“M (month)” will be highlighted.
7
Repeat Step 6 to set “M (month),” “D
(day),” “H (hour),” and “M (minute),”
then press ENTER.
When you press ENTER after setting “M
(minute),” the clock starts operating.
(day),” “H (hour),” and “M (minute),”
then press ENTER.
When you press ENTER after setting “M
(minute),” the clock starts operating.
If you make a mistake
Press
C repeatedly until the item you want to
correct is highlighted, then input the correct
number.
number.
To turn off the Setup Display
Press DISPLAY repeatedly until the Setup
Display is turned off.
Display is turned off.
CUSTOM SETUP
DIMMER:
PAUSE MODE:
PAUSE MODE:
BRIGHT
AUTO
OFF
TRACK SELECTION:
DATE/TIME SETUP
DATE/TIME SETUP
OFF
AUTO PLAY:
2 0 0 2
3
3
8
0 8
DATE/TIME SETUP
Y
D
M
M
H
:
A M
/
/
CUSTOM SETUP
Start with the year.
75
P
lay
in
in
g a
“
Me
mo
ry S
tick
”
”
Note
When you disconnect the power cord, the date/time
setting will return to the factory settings.
setting will return to the factory settings.
Viewing a JPEG Image File
You can view JPEG image files recorded on
an “MG Memory Stick” or a “Memory
Stick.” Note, however, that the player can
display JPEG image files recorded using a
digital camera only if the image file format
and the directory structure are DCF
compliant.
Make sure the MS indicator is lit (MS mode)
when you play an “MG Memory Stick” or
“Memory Stick.”
an “MG Memory Stick” or a “Memory
Stick.” Note, however, that the player can
display JPEG image files recorded using a
digital camera only if the image file format
and the directory structure are DCF
compliant.
Make sure the MS indicator is lit (MS mode)
when you play an “MG Memory Stick” or
“Memory Stick.”
1
Insert a “Memory Stick” into the
MEMORY STICK slot (page 72).
MEMORY STICK slot (page 72).
MS
.
/
>
H
DISPLAY
MENU
C/X/x/c
O
RETURN
ENTER
continued
,
76
2
Press MS.
The MS indicator on the player lights up
(MS mode).
The Control Menu is displayed.
(MS mode).
The Control Menu is displayed.
3
Press
X/x to select “IMAGE.”
4
Press
H
or ENTER.
The first image recorded on the “Memory
Stick” is played back.
Stick” is played back.
To play the next or previous file
Press
> or ..
z
You can also use
>
or
.
on the player to
select “IMAGE” in Step 3.
z
If you want to play ATRAC3 audio tracks after
viewing JPEG image files, press DISPLAY to display
the Control Menu. Select
the Control Menu. Select
using
X/x, then press
ENTER. Follow from Step 3 of “Playing an ATRAC3
Audio Track” on page 73.
Audio Track” on page 73.
Notes
• JPEG image files which have been edited or
renamed on computers may not be displayed.
• JPEG image files which are set to display larger than
4720 dots vertically or horizontally may not be
displayed.
displayed.
• JPEG image files which do not fit the screen will be
reduced so they can be displayed properly.
Selecting an album and file
1
After Step 4 in “Viewing a JPEG Image
File,” press MENU.
File,” press MENU.
A list of the albums saved on the
“Memory Stick” appears. When an
album is being played, its title is shaded.
“Memory Stick” appears. When an
album is being played, its title is shaded.
2
Press
X/x to select an album, then press
ENTER.
The files in the album appear. When a file
is being played, its title is shaded.
The files in the album appear. When a file
is being played, its title is shaded.
3
Press
X/x to select the file, then press
ENTER.
The player starts playing the selected file.
The player starts playing the selected file.
To go to the next or previous page
Press
c or C.
To return to the previous display
Press
ORETURN.
A U D I O
A U D I O
I M A G E
I M A G E
1 ( 2 )
1 0 0 M S D C F
1 0 1 M S D C F
1 0 1 M S D C F
I M A G E
List of album names
Highlighted album number
Total albums in the
“Memory Stick”
“Memory Stick”
I M A G E
1 0 0 M S D C F
1 ( 2 8 )
1 0 0 M S D C F
1 ( 2 8 )
D S C 0 0 0 0 1
D S C 0 0 0 0 2
D S C 0 0 0 0 3
D S C 0 0 0 0 4
D S C 0 0 0 0 5
D S C 0 0 0 0 6
D S C 0 0 0 0 7
D S C 0 0 0 0 2
D S C 0 0 0 0 3
D S C 0 0 0 0 4
D S C 0 0 0 0 5
D S C 0 0 0 0 6
D S C 0 0 0 0 7
List of file names
Highlighted file number
Total files in the
“Memory Stick”
“Memory Stick”
77
P
lay
ing a
ing a
“
Me
mory S
tick
”
”
To turn off the display
Press MENU.
To switch to disc mode
Press MS. The MS indicator goes out.
z
By pressing MENU, you can display the album list
when the player is stopped.
Notes
• Only the letters in alphabet and numbers in the
album/file names can be displayed. Other characters
appear as an “*” (asterisk).
appear as an “*” (asterisk).
• MS mode will be released when:
– the player enters standby mode
– the power cord is disconnected
– the power cord is disconnected
Rotating a JPEG image
You can rotate an image by 90 degrees.
Press
C/c while viewing an image.
Each time you press
c, the image rotates
clockwise by 90 degrees.
Each time you press
Each time you press
C, the image rotates
counterclockwise by 90 degrees.
Example of when you press
Example of when you press
c once:
Rotating direction
1-19
78
Using Various Additional
Functions
Functions
Locking Discs
(Custom Parental
Control, Parental Control)
You can set two kinds of playback
restrictions for the desired disc.
• Custom Parental Control
restrictions for the desired disc.
• Custom Parental Control
You can set the playback restrictions so that
the player will not play inappropriate discs.
the player will not play inappropriate discs.
• Parental Control
Playback of some DVD VIDEOs can be
limited according to a predetermined level
such as the age of the users.
limited according to a predetermined level
such as the age of the users.
The same password is used for both Parental
Control and Custom Parental Control.
Control and Custom Parental Control.
Custom Parental Control
You can set the same Custom Parental
Control password for up to 50 discs. When
you set the fifty-first disc, the first disc is
canceled.
Control password for up to 50 discs. When
you set the fifty-first disc, the first disc is
canceled.
1
Insert the disc you want to lock.
If the disc is playing, press
If the disc is playing, press
x to stop
playback.
2
Press DISPLAY while the player is in
stop mode.
The Control Menu is displayed.
stop mode.
The Control Menu is displayed.
3
Press
X/x to select
(PARENTAL CONTROL), then press
ENTER.
The options for “PARENTAL
CONTROL” appear.
ENTER.
The options for “PARENTAL
CONTROL” appear.
4
Press
X/x to select “ON t,” then
press ENTER.
x If you have not entered a password
The display for registering a new
password appears.
The display for registering a new
password appears.
Enter a 4-digit password by pressing
X/
x to select the digit, followed by c to
move the cursor. Then press ENTER.
The display for confirming the password
appears.
move the cursor. Then press ENTER.
The display for confirming the password
appears.
x When you have already registered a
password
The display for entering the password
appears.
password
The display for entering the password
appears.
x
ENTER
O
RETURN
DISPLAY
C/X/x/c
OFF
PASSWORD
PLAYER
ON
DVD VIDEO
1 8 ( 3 4 )
1 2 ( 2 7 )
T 1 : 3 2 : 5 5
STOP
PARENTAL CONTROL
Enter a new 4-digit password, then
press
.
ENTER
PARENTAL CONTROL
Enter password, then press
.
ENTER
79
Using Var
io
u
s
Additional Functions
5
Enter or re-enter your 4-digit password
by pressing
by pressing
X/x to select the digit,
followed by
c to move the cursor. Then
press ENTER.
“Custom parental control is set.” appears
and then the screen returns to the Control
Menu display.
“Custom parental control is set.” appears
and then the screen returns to the Control
Menu display.
To turn off the Custom Parental
Control function
1
Follow Steps 1 through 3 of “Custom
Parental Control.”
Parental Control.”
2
Press
X/x to select “OFF t,” then press
ENTER.
3
Enter your 4-digit password using
X/x
to select the digit, followed by
c to move
the cursor. Then press ENTER.
To play the disc for which Custom
Parental Control is set
1
Insert the disc for which Custom Parental
Control is set.
The “CUSTOM PARENTAL
CONTROL” display appears.
Control is set.
The “CUSTOM PARENTAL
CONTROL” display appears.
2
Enter your 4-digit password using
X/x
to select the digit, followed by
c to move
the cursor. Then press ENTER.
The player is ready for playback.
The player is ready for playback.
z
If you forget your password, enter the 6-digit
number “199703” when the “CUSTOM PARENTAL
CONTROL” display asks you for your password, then
press ENTER. (Press
CONTROL” display asks you for your password, then
press ENTER. (Press
c after the 4th digit to allow the
entire 6-digit number to be entered.) The display will
ask you to enter a new 4-digit password.
ask you to enter a new 4-digit password.
Parental Control (limiting playback
by children)
by children)
Playback of some DVD VIDEOs can be
limited according to a predetermined level
such as the age of the users. The
“PARENTAL CONTROL” function allows
you to set a playback limitation level.
A scene that is limited is not played, or it is
replaced by a different scene.
limited according to a predetermined level
such as the age of the users. The
“PARENTAL CONTROL” function allows
you to set a playback limitation level.
A scene that is limited is not played, or it is
replaced by a different scene.
.
1
Press DISPLAY while the player is in
stop mode.
The Control Menu appears.
stop mode.
The Control Menu appears.
2
Press
X/x to select
(PARENTAL CONTROL), then press
ENTER.
The options for “PARENTAL
CONTROL” appear.
ENTER.
The options for “PARENTAL
CONTROL” appear.
CUSTOM PARENTAL CONTROL
Custom parental control is already
set. To play, enter your password
and press
set. To play, enter your password
and press
.
ENTER
ENTER
O
RETURN
DISPLAY
H
X/x/c
OFF
PASSWORD
PLAYER
ON
DVD VIDEO
STOP
1 8 ( 3 4 )
1 2 ( 2 7 )
T 1 : 3 2 : 5 5
continued
,
80
3
Press
X/x to select “PLAYER t,” then
press ENTER.
x If you have not entered a password
The display for registering a new
password appears.
The display for registering a new
password appears.
Enter a 4-digit password by pressing
X/
x to select the digit, followed by c to
move the cursor. Then press ENTER.
The display for confirming the password
appears.
move the cursor. Then press ENTER.
The display for confirming the password
appears.
x When you have already registered a
password
The display for entering the password
appears.
password
The display for entering the password
appears.
4
Enter or re-enter your 4-digit password
by pressing
by pressing
X/x to select the digit,
followed by
c to move the cursor. Then
press ENTER.
The display for setting the playback
limitation level appears.
The display for setting the playback
limitation level appears.
5
Press
X/x to select “STANDARD,” then
press ENTER.
The selection items for “STANDARD”
are displayed.
The selection items for “STANDARD”
are displayed.
6
Press
X/x to select a geographic area
as the playback limitation level, then
press ENTER.
The area is selected.
When you select “OTHERS
press ENTER.
The area is selected.
When you select “OTHERS
t
,” select
and enter the standard code in the table on
page 81 using
page 81 using
X/x.
7
Press
X/x to select “LEVEL,” then
press ENTER.
The selection items for “LEVEL” are
displayed.
The selection items for “LEVEL” are
displayed.
8
Select the level you want using
X/x,
then press ENTER.
Parental Control setting is complete.
Parental Control setting is complete.
PARENTAL CONTROL
Enter a new 4-digit password, then
press
.
ENTER
PARENTAL CONTROL
Enter password, then press
.
ENTER
PARENTAL CONTROL
LEVEL:
OFF
USA
USA
STANDARD:
PARENTAL CONTROL
LEVEL:
OFF
USA
USA
STANDARD:
USA
OTHERS
PARENTAL CONTROL
LEVEL:
OFF
OFF
STANDARD:
8:
7:
6:
5:
7:
6:
5:
NC17
R
PARENTAL CONTROL
LEVEL:
STANDARD:
STANDARD:
USA
4:
PG13
81
Using Var
io
u
s
Additional Functions
The lower the value, the more strict the
limitation.
limitation.
To turn off the Parental Control
function
Set “LEVEL” to “OFF” in Step 8.
To play a disc for which Parental
Control is set
1
Insert the disc and press
H.
The “PARENTAL CONTROL” display
appears.
appears.
2
Enter your 4-digit password using
X/x
to select the digit, followed by
c to move
the cursor. Then press ENTER.
The player starts playback.
The player starts playback.
z
If you forget your password, remove the disc and
repeat Steps 1 to 3 of “Parental Control (limiting
playback by children).” When you are asked to enter
your password, enter “199703,” then press ENTER.
(Press
playback by children).” When you are asked to enter
your password, enter “199703,” then press ENTER.
(Press
c after the 4th digit to allow the entire 6 digit
number to be entered.) The display will ask you to
enter a new 4-digit password. After you enter a new 4-
digit password, replace the disc in the player and press
H. When the “PARENTAL CONTROL” display
appears, enter your new password.
enter a new 4-digit password. After you enter a new 4-
digit password, replace the disc in the player and press
H. When the “PARENTAL CONTROL” display
appears, enter your new password.
Notes
• When you play DVD VIDEOs which do not have the
Parental Control function, playback cannot be
limited on this player.
limited on this player.
• Depending on the DVD VIDEO, you may be asked
to change the parental control level while playing the
disc. In this case, enter your password, then change
the level. If the Resume Play mode is canceled, the
level returns to the original level.
disc. In this case, enter your password, then change
the level. If the Resume Play mode is canceled, the
level returns to the original level.
Area Code
Changing the password
1
Press DISPLAY while the player is in
stop mode.
The Control Menu appears.
stop mode.
The Control Menu appears.
2
Press
X/x to select
(PARENTAL CONTROL), then press
ENTER.
The options for “PARENTAL
CONTROL” appear.
ENTER.
The options for “PARENTAL
CONTROL” appear.
3
Press
X/x to select “PASSWORD t,”
then press ENTER.
The display for entering the password
appears.
The display for entering the password
appears.
Standard
Code
number
number
Argentina
2044
Australia
2047
Austria
2046
Belgium
2057
Brazil
2070
Canada
2079
Chile
2090
China
2092
Denmark
2115
Finland
2165
France
2174
Germany
2109
India
2248
Indonesia
2238
Italy
2254
Japan
2276
Standard
Code
number
number
Korea
2304
Malaysia
2363
Mexico
2362
Netherlands
2376
New Zealand 2390
Norway
2379
Pakistan
2427
Philippines
2424
Portugal
2436
Russia
2489
Singapore
2501
Spain
2149
Sweden
2499
Switzerland
2086
Thailand
2528
United
Kingdom
Kingdom
2184
continued
,
1-20
82
4
Enter your 4-digit password using
X/x to
select the digit, followed by
c to move
the cursor. Then press ENTER.
5
Enter a new 4-digit password using
X/x
to select the digit, followed by
c to move
the cursor. Then press ENTER.
6
To confirm your password, re-enter it
using
using
X/x to select the digit, followed by
c to move the cursor. Then press
ENTER.
ENTER.
If you make a mistake entering your
password
Press
C before you press ENTER and input
the correct number.
If you make a mistake
Press
ORETURN.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
Menu is turned off.
Operation Sound Effects
(Sound Feedback)
The player beeps when the following
operations are performed.
The default setting of the Sound Feedback
function is set to off.
operations are performed.
The default setting of the Sound Feedback
function is set to off.
Operation
Operation sound
Power is turned on
One beep
Power is turned off
Two beeps
H
is pressed
One beep
X
is pressed
Two beeps
Playback is stopped
One long beep
Operation is not possible
Three beeps
83
Using Var
io
u
s
Additional Functions
To set Sound Feedback
1
Press
?/1 on the player or the remote.
The
?/1 indicator lights up in green.
Make sure that the MS indicator is turned
off. If there is a disc in the player, press
A and remove the disc.
off. If there is a disc in the player, press
A and remove the disc.
2
Press and hold
X on the player for more
than two seconds.
You will hear one beep and the Sound
Feedback function is turned on.
You will hear one beep and the Sound
Feedback function is turned on.
To turn off the Sound Feedback
function
When there is no disc in the player and the
MS indicator is turned off, press and hold
MS indicator is turned off, press and hold
X
on the player for more than two seconds. You
will hear two beeps and the Sound Feedback
function is turned off.
will hear two beeps and the Sound Feedback
function is turned off.
Controlling Your TV, etc.
with the Supplied Remote
with the Supplied Remote
By adjusting the remote signal, you can
control your TV or Sony Active Speaker
System SA-F21 (not supplied) with the
supplied remote.
control your TV or Sony Active Speaker
System SA-F21 (not supplied) with the
supplied remote.
Notes
• Depending on the units being connected, you may
not be able to control your TV or Sony AV amplifier
(receiver) using some of the buttons below.
(receiver) using some of the buttons below.
• If you enter a new TV code, the code previously
entered will be erased.
• When you replace the batteries of the remote, the TV
code may be reset to the default setting. Reset the
appropriate code.
appropriate code.
Controlling TVs with the remote
1
Slide the TV/DVD switch to “TV.”
2
Hold down
?/1, and enter your TV’s
manufacturer’s code (see the table)
using
using
C/X/x/c.
3
Release
?/1.
?/1
button/indicator
X
?/1
A
MS indicator
TV/VIDEO
VOL
?/1
TV/DVD
WIDE MODE
C/X/x/c
continued
,
84
Manufacturer’s codes of controllable
TVs
Controlling the TV
When you set the TV/DVD switch to “TV,”
you can control your TV using the buttons
below.
you can control your TV using the buttons
below.
Controlling Active Speaker System
SA-F21
SA-F21
When you set the TV/DVD switch to
“DVD,” you can adjust the volume using
VOL +/–.
“DVD,” you can adjust the volume using
VOL +/–.
z
There are some Sony audio products you can
adjust the volume with the supplied remote.
By pressing
You can
?/1
Turn the TV on or off
VOL (volume) +/–
Adjust the volume of the
TV
TV
TV/VIDEO
Switch the TV’s input
source between the TV and
other input sources
source between the TV and
other input sources
WIDE MODE
Switch to or from the wide
mode of a Sony wide TV
mode of a Sony wide TV
Manufacturer Press
C/X/x/c to input code
Sony (default)
XX
Fisher
Xx
General Electric
XC
JVC
xX
Magnavox
Xc
Panasonic
cc
Philips
Xc
Quasar
cx
RCA
XC
Samsung
xc
Sanyo
Xx
Sears
cC or XC or Xx
Sharp
cx
Teknika
Xc
Toshiba
cC
Zenith
cX
85
S
e
tt
ings and
Adjustments
Settings and Adjustments
Using the Setup Display
By using the Setup Display, you can make
various adjustments to items such as picture
and sound. You can also set a language for
the subtitles and the Setup Display, among
other things. For details on each Setup
Display item see page 86 through 92. For an
overall list of Setup Display items, see page
102.
various adjustments to items such as picture
and sound. You can also set a language for
the subtitles and the Setup Display, among
other things. For details on each Setup
Display item see page 86 through 92. For an
overall list of Setup Display items, see page
102.
Note
Playback settings stored in the disc take priority over
the Setup Display settings and not all the functions
described may work.
the Setup Display settings and not all the functions
described may work.
How to use the Setup Display
1
Press DISPLAY on the remote when the
player is in stop mode.
The Control Menu appears.
player is in stop mode.
The Control Menu appears.
2
Press
X/x to select
(SETUP),
then press ENTER.
The options for “SETUP” appear.
The options for “SETUP” appear.
3
Press
X/x to select “CUSTOM,” then
press ENTER.
The Setup Display appears.
The Setup Display appears.
4
Press
X/x to select the setup item from
the displayed list: “LANGUAGE SETUP,”
“SCREEN SETUP,” “CUSTOM SETUP,”
or “AUDIO SETUP.” Then press ENTER.
The selected setup item appears.
Example: “SCREEN SETUP”
“SCREEN SETUP,” “CUSTOM SETUP,”
or “AUDIO SETUP.” Then press ENTER.
The selected setup item appears.
Example: “SCREEN SETUP”
5
Select an item using
X/x, then press
ENTER.
The options for the selected item appear.
Example: “TV TYPE”
The options for the selected item appear.
Example: “TV TYPE”
DISPLAY
ENTER
X/x
( 47 )
: :
QUICK
CUSTOM
RESET
CUSTOM
RESET
DVD VIDEO
STOP
QUICK
LANGUAGE SETUP
MENU:
AUDIO:
SUBTITLE:
AUDIO:
SUBTITLE:
ORIGINAL
ENGLISH
OSD:
ENGLISH
ENGLISH
ENGLISH
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
SCREEN SAVER:
BACKGROUND:
4:3 LETTER BOX
ON
JACKET PICTURE
Selected item
Setup items
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
SCREEN SAVER:
BACKGROUND:
4:3 LETTER BOX
4:3 LETTER BOX
4:3 LETTER BOX
4:3 PAN SCAN
16:9
Options
continued
,
1-21
86
6
Select a setting using
X/x, then press
ENTER.
The setting is selected and setup is
complete.
Example: “16:9”
The setting is selected and setup is
complete.
Example: “16:9”
To turn off the Setup Display
Press DISPLAY repeatedly until the Setup
Display is turned off.
Display is turned off.
z
If you select “QUICK” in Step 3, you will enter the
Quick Setup mode (page 34).
Follow from Step 5 of the Quick Setup explanation to
make basic adjustments.
Follow from Step 5 of the Quick Setup explanation to
make basic adjustments.
z
If you select “RESET” in Step 3, you can reset all
of the “SETUP” settings on pages 102 to 103 to the
default settings (except for “DATE/TIME SETUP”).
After you select “RESET” and press ENTER, select
“YES” and press ENTER to reset the settings (it takes
a few seconds to complete), or select “NO” and press
ENTER to return to the Control Menu. Do not turn off
the player during resetting.
default settings (except for “DATE/TIME SETUP”).
After you select “RESET” and press ENTER, select
“YES” and press ENTER to reset the settings (it takes
a few seconds to complete), or select “NO” and press
ENTER to return to the Control Menu. Do not turn off
the player during resetting.
Setting the Display or
Sound Track Language
Sound Track Language
(LANGUAGE SETUP)
“LANGUAGE SETUP” allows you to set
various languages for the on-screen display
or sound track.
various languages for the on-screen display
or sound track.
Select “LANGUAGE SETUP” in the Setup
Display. For details on using the display, see
“Using the Setup Display” (page 85).
Display. For details on using the display, see
“Using the Setup Display” (page 85).
xOSD (On-Screen Display)
Switches the display language on the screen.
Selects the language from the displayed list.
Switches the display language on the screen.
Selects the language from the displayed list.
xMENU (DVD VIDEO only)
You can select the desired language for the
menu. Selects the language from the
displayed list.
You can select the desired language for the
menu. Selects the language from the
displayed list.
xAUDIO (DVD VIDEO only)
Switches the language of the sound track.
Selects the language from the displayed list.
When you select “ORIGINAL,” the language
given priority in the disc is selected.
Switches the language of the sound track.
Selects the language from the displayed list.
When you select “ORIGINAL,” the language
given priority in the disc is selected.
xSUBTITLE (DVD VIDEO only)
Switches the language of the subtitles
recorded on the DVD VIDEO.
Select the language from the displayed list.
When you select “AUDIO FOLLOW,” the
language for the subtitles changes according
to the language you selected for the sound
track.
Switches the language of the subtitles
recorded on the DVD VIDEO.
Select the language from the displayed list.
When you select “AUDIO FOLLOW,” the
language for the subtitles changes according
to the language you selected for the sound
track.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
SCREEN SAVER:
BACKGROUND:
16:9
ON
JACKET PICTURE
Selected setting
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
MENU:
AUDIO:
SUBTITLE:
ENGLISH
ENGLISH
ENGLISH
ORIGINAL
ENGLISH
87
S
e
tt
ings and
Adjustments
z
If you select “OTHERS
t” in “MENU,”
“SUBTITLE,” and “AUDIO,” select and enter the
language code from the list using
language code from the list using
X/x to select the
digit, followed by
c to move the cursor (page 101).
After you have made a selection, the language code (4
digits) is displayed the next time you select
“OTHERS
digits) is displayed the next time you select
“OTHERS
t.”
Note
When you select a language that is not recorded on the
disc, one of the recorded languages will be
automatically selected (except for the “OSD”).
disc, one of the recorded languages will be
automatically selected (except for the “OSD”).
Settings for the Display
(SCREEN SETUP)
Choose settings according to the TV to be
connected.
connected.
Select “SCREEN SETUP” in the Setup
Display. For details on using the display, see
“Using the Setup Display” (page 85).
The default settings are underlined.
Display. For details on using the display, see
“Using the Setup Display” (page 85).
The default settings are underlined.
xTV TYPE
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
4:3
LETTER
BOX
LETTER
BOX
Select this when you connect a
4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the screen.
4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the screen.
4:3 PAN
SCAN
SCAN
Select this when you connect a
4:3 screen TV. Automatically
displays the wide picture on the
entire screen and cuts off the
portions that do not fit.
4:3 screen TV. Automatically
displays the wide picture on the
entire screen and cuts off the
portions that do not fit.
16:9
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
wide-screen TV or a TV with a
wide mode function.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
SCREEN SAVER:
BACKGROUND:
4:3 LETTER BOX
ON
JACKET PICTURE
continued
,
88
Note
Depending on the DVD, “4:3 LETTER BOX” may be
selected automatically instead of “4:3 PAN SCAN” or
vice versa.
selected automatically instead of “4:3 PAN SCAN” or
vice versa.
xSCREEN SAVER
Turns on and off the screen saver so that the
screen saver image appears when you leave
the player in pause or stop mode for 15
minutes, or when you play back an audio or
image on a CD/DATA-CD (MP3 audio
track)/ “Memory Stick” (ATRAC3 audio
track or JPEG image) for more than 15
minutes. The screen saver will help prevent
your display device from becoming damaged
(ghosting). Press
Turns on and off the screen saver so that the
screen saver image appears when you leave
the player in pause or stop mode for 15
minutes, or when you play back an audio or
image on a CD/DATA-CD (MP3 audio
track)/ “Memory Stick” (ATRAC3 audio
track or JPEG image) for more than 15
minutes. The screen saver will help prevent
your display device from becoming damaged
(ghosting). Press
H to turn off the screen
saver.
xBACKGROUND
Selects the background color or picture on the
TV screen in stop mode or while playing a
CD/DATA-CD (MP3 audio track)/”MG
Memory Stick” (ATRAC3 audio track).
Selects the background color or picture on the
TV screen in stop mode or while playing a
CD/DATA-CD (MP3 audio track)/”MG
Memory Stick” (ATRAC3 audio track).
ON
Turns on the screen saver.
OFF
Turns off the screen saver.
4:3 LETTER BOX
4:3 PAN SCAN
16:9
JACKET
PICTURE
PICTURE
The jacket picture (still picture)
appears in the background, but
only when the jacket picture is
already recorded on the disc
(CD-EXTRA, etc.). If the disc
does not contain a jacket picture,
the “GRAPHICS” picture
appears.
appears in the background, but
only when the jacket picture is
already recorded on the disc
(CD-EXTRA, etc.). If the disc
does not contain a jacket picture,
the “GRAPHICS” picture
appears.
GRAPHICS
A preset picture stored in the
player appears in the background.
player appears in the background.
BLUE
The background color is blue.
BLACK
The background color is black.
89
S
e
tt
ings and
Adjustments
Custom Settings
(CUSTOM
SETUP)
Use this to set up playback related and other
settings.
settings.
Select “CUSTOM SETUP” in the Setup
Display. For details on using the display, see
“Using the Setup Display” (page 85).
The default settings are underlined.
Display. For details on using the display, see
“Using the Setup Display” (page 85).
The default settings are underlined.
xAUTO PLAY
Selects the Auto Play setting when you turn
on the player.
Selects the Auto Play setting when you turn
on the player.
xDIMMER
Adjusts the lighting of the front panel
display.
Adjusts the lighting of the front panel
display.
xPAUSE MODE (DVD VIDEO/DVD-RW
only)
only)
Selects the picture in pause mode.
xTRACK SELECTION (DVD VIDEO
only)
only)
Gives the sound track which contains the
highest number of channels priority when
you play a DVD VIDEO on which multiple
audio formats (PCM, DTS or Dolby Digital
format) are recorded.
highest number of channels priority when
you play a DVD VIDEO on which multiple
audio formats (PCM, DTS or Dolby Digital
format) are recorded.
OFF
Does not use “TIMER,”
“DEMO1,” or “DEMO2” to start
playback.
“DEMO1,” or “DEMO2” to start
playback.
TIMER
Starts playing when the player is
turned on.
A CD, DVD VIDEO or VIDEO
CD can be played at any time
when the player is connected to a
timer (not supplied).
turned on.
A CD, DVD VIDEO or VIDEO
CD can be played at any time
when the player is connected to a
timer (not supplied).
DEMO1
Starts playing the first
demonstration automatically.
demonstration automatically.
DEMO2
Starts playing the second
demonstration automatically.
demonstration automatically.
CUSTOM SETUP
DIMMER:
PAUSE MODE:
PAUSE MODE:
BRIGHT
AUTO
OFF
TRACK SELECTION:
DATE/TIME SETUP
DATE/TIME SETUP
OFF
AUTO PLAY:
BRIGHT
Makes the front panel display
bright.
bright.
DARK
Makes the front panel display
dark.
dark.
OFF
Turns off the lighting of the front
panel display.
panel display.
AUTO
Turn on the front panel display
for a few seconds when a button
on the player or remote is
pressed.
for a few seconds when a button
on the player or remote is
pressed.
AUTO
The picture, including subjects
that move dynamically, is output
with no jitter. Normally, select
this position.
that move dynamically, is output
with no jitter. Normally, select
this position.
FRAME
The picture, including subjects
that do not move dynamically, is
output in high resolution.
that do not move dynamically, is
output in high resolution.
OFF
No priority given.
AUTO
Priority given.
continued
,
Click on the first or last page to see other DVP-F41MS service manuals if exist.