DOWNLOAD Sony DAV-DZ118K / HCD-DZ118K Service Manual ↓ Size: 10.06 MB | Pages: 80 in PDF or view online for FREE

17

1

two claws

5

three claws

7

 MS-203 board

6

 DC motor

3

 belt

2

 chuck cam

4

 screw

(M 1.7 

×

 2.5) 

18

1

two claws

3

two claws

2

 chuck cam

4

 base unit 

5

two claws

7

bu holder

8

two insulators 

9

two insulators

6

four insulator screws

0

optical pick-up 

     (KHM-310CAA) 

19

Regarding the notification symbol “R”
Because the number of the operating buttons of this product
are limited, some operations require use of the operating
buttons of the remote commander, When a specific operation
requires use of the operating buttons of the remote
commander, “R” is added to the specific operating procedure
in this manual. Example  MENU/NO  “R”  The  MENU/NO
button of remote commander.

Incorrect operations may be performed if the test mode is
not entered properly.
In this case, press the  ?/1  button to turn the power off, and
retry to enter the test mode.

The disc tray lock function for the antitheft of an demonstration
disc in the store is equipped.
Setting Procedure :

1. Press the  ?/1  button to turn the set on.
2. Press the  FUNCTION  button to set DVD function.
3. Insert a disc.
4. Press the  

x  

button and the  A  button simultaneously for five

seconds.

5. The message “LOCKED” is displayed and the tray is locked.

1. Press the  

x  

button and the  A  button simultaneously for five

seconds again.

2. The message “UNLOCKED” is displayed and the tray is

unlocked.

When “LOCKED” is displayed, the slot lock is not released by
turning power on/off with the  ?/1  button.

•

Use this mode when returning the set to the customer after
repair.

1. Press the  ?/1  button to turn the set on.
2. Press the  FUNCTION  button to set the function “DVD”.
3. Remove all discs, and then press two buttons  x  and   .

simultaneously.

4. After a message “MECHA LOCK” is displayed on the

fluorescent indicator tube, pull out the AC plug.

5. To exit from this mode, press the  ?/1  button to turn the set on.

1. Press the  ?/1  button to turn the power on.
2. Press three buttons  . ,  H and  >  simultaneously.
3. The message “VOLUME MAX” is displayed, when the

VOLUME  control is turned in the dirction of (+).
The message “VOLUME MIN” is displayed, when the
VOLUME  control is turned in the dirction of (–).

4. To exit from this mode, press the  ?/1  button to turn the set off.

This mode moves the optical pick-up to the position durable to
vibration and clears all data including preset data stored in the RAM
to initial conditions. Use this mode when returning the set to the
customer after repair.
Procedure:

1. Press the  ?/1  button to turn the power on.
2. Press the  FUNCTION  button to set the function “DVD”.
3. Remove all discs, and then press three buttons  > ,  A  and

?/1  simultaneously.

4. After the “STANDBY” blinking display finishes, the message

“MECHA LOCK” is displayed on the fluorescent indicator
tube disconnect the AC power plug, then the ship mode is set.

•

The cold reset clears all data including preset data stored in
the RAM to initial conditions. Execute this mode when
returning the set to the customers.

1. Press the  ?/1  button to turn the power on.
2. Press three buttons  x  ,   A  and   ?/1  simultaneously.
3. When this button is operated, display as “COLD RESET” for

a while and all of the settings are reset.

•

This mode is used to check the software version, FL, LED
and KEY.

1. Press the  ?/1  button to turn the power on.
2. Press three buttons  X ,  . and  A  simultaneously.
3. When the display test mode is activated, all segments and LEDs

are turned on.

4. To exit from this mode, press three buttons  X ,  . and  A

simultaneously.

1. When the display test mode is activated, press the  .  button

and the message “DSX1K–” is displayed, the version test mode
is activated.

2. Whenever the  .  button is pressed, the display changes in

the following order.

*1: Changes depending on destination.

3. Press the  >  button and the date of the software production

is displayed.

4. Press the  >  button again and the version is displayed.
5. To exit from this mode, press three buttons  X ,  . and  A

simultaneously.

1. When the display test mode is activated, press the  H  button,

to select the key test mode.

2. To enter the KEY test mode, the fluorescent indicator displays

“K0 V0”. Each time a button is pressed, “KEY” value
increases. However, once a button is pressed, it is no longer
taken into account. When all keys are pressed correctly, “K8
V0” is displayed.

3. When the  VOLUME  control is turned in the direction of (+),

“V0” is changed to “V1”, then ... “V9”.
When the  VOLUME  control is turned in the direction of (–),
“V0” is changed to “V9”, then ... “V1”.

4. To exit from this mode, press three buttons  X ,  . and  A

simultaneously.

“DSX1K–” (Model name) t “XX

*1

” (Destination) t MC 

TM T DSP T TA T ST T DVD T UI T SYS  

20

The IOP measurement allows you to make diagnosis and adjustment
simply by using the remote commander and monitor TV. The
instructions, diagnosis results, etc. are given on the on-screen display
(OSD).
Be sure to execute the IOP measurement when a BU (Base Unit) is
replaced.

While pressing the  

x  

and  A  buttons simultaneously, turn

VOLUME +  with the DVD player in power on.
The Test Mode starts, then the menu shown below will be displayed
on the TV screen.

The menu above is the Remocon Diagnosis Menu screen which
consists of five main functions. At the bottom of the menu screen, the
model name and IF-con version. To exit from the Test Mode, press
the power button on the remote commander.

In order to execute IOP measurement, the following standard
procedures must be followed.

(1) In power on, while pressing the  

x  

and  A  buttons

simultaneously, turn   VOLUME +  .

Remocon Diagnosis Menu

0. External Chip Check
1. Servo Parameter Check
2. Drive Manual Operation
3. Emergency History Check
4. Version Information

Model Name
IF-con

: V

Syscon

: Ver.

er. XX.XX (XXXX)

X.XXX

: DSX1K–_ XX

*

1

*1: Changes depending on destination 

(2) Select “2. Drive Manual Operation” by pressing the  2 “R”

button on the remote commander. The screen will appear as
shown.

(3) Select “3. Manual Adjustment” by pressing the  3 “R”  button

on the remote commander. The screen will appear as shown.

(4) Select “6.IOP” by pressing the  6 “R”  button on the remote

commander.

(5) Wait until a hexadecimal number appear.

(6) Convert each data from hexadecimal to decimal using

  conversion table.

(7) Please find the label on the rear of the BU (Base Unit).

 The default IOP value is written in the label.

(8) Subtract between these two values.

(9) If the remainder is smaller than 93 (decimal), then it is OK.

 However if the value is higher than 93, then the BU  is defective
 and need to be change.

(10) Press the  RETURN “R”  button to return back to previous

   menu.

(11) Press the  0 “R”  button to return to Top Menu and power

   off the DVD Player.

Remocon Diagnosis Menu

0. External Chip Check
1. Servo Parameter Check
2. Drive Manual Operation
3. Emergency History Check
4. Version information

Model Name
IF-con

:  Ver. XX.XX (XXXX)

Syscon

:  Ver. X.XXX

: DSX1K–_ XX

*

1

*1: Changes depending on destination 

Drive Manual Operation

1. Servo Control
2. Track/Layer Jump
3. Manual Adjustment
4. Tray Aging Mode
5. MIRR time adjust
0. Return to top Menu

Manual Adjust

1. Track Balance Adjust:
2. Track Gain Adjust:
3. Focus Balance Adjust:
4. Focus Gain Adjust:
5. Eq boost Adjust:
6. Iop:
7. TRV. Level:
8. S curve(FE) Level:
9. RFL(PI) Level:
0. MIRR Time:

o

  O    Change Value

[RETURN] Return to previous menu

Manual Adjust

1. Track Balance Adjust:
2. Track Gain Adjust:
3. Focus Balance Adjust:
4. Focus Gain Adjust:
5. Eq Boost Adjust:
6. Iop. 5B:
7. TRV. Level:
8. S curve(FE) Level:
9. RFL(PI) Level:
0. MIRR Time:

Change Value
[0] Return to previous menu