Sony BDP-S780 Service Manual ▷ View online
1-22
Shoot the barcode
Format is JPEG
Format is JPEG
Application Software
Data convert from
JPEG
Data convert from
JPEG
TEXT
Save the TEXT data
USB device is connected
to symbol on the
rear unit, and the TEXT
data as new data is
loaded to unit by service
mode.
to symbol on the
rear unit, and the TEXT
data as new data is
loaded to unit by service
mode.
Description: BDPRdec.exe
When instruction to PC, password is required.
The password will be supplied to only service HQ, and service center
name, q’ty and all of software registered information should be
maintained by service HQ, and Video will ask to report the registration
information.
BDP-S780
1-2
3E
.
5
-
1
REAR PANEL ASSEMBLY CAUTION
Whenever you need to assemble the rear panel, please make sure that the Ethernet connector (CN801)
Top Contact Springs are in good condition with height ≥2.0mm ± 0.5mm (refer to Fig 1)
Top Contact Springs are in good condition with height ≥2.0mm ± 0.5mm (refer to Fig 1)
before assembling the rear panel.
Spec.
Fig.1
Good Contact
Fig.2
When assembling the rear panel, please ensure good contact
between the Top Contact Springs to the rear panel.
between the Top Contact Springs to the rear panel.
BDP-S780
2-1
BDP-S780
SECTION 2
DISASSEMBLY
• This set can be disassembled in the order shown below.
Note: Follow the disassembly procedure in the numerical order given.
2-2. UPPER CASE
tapping screw
(tightening torque = 5 to 6 kgf•cm)
2 Tapping screw
(tightening torque =5 to 6 kgf•cm)
3 Three tapping screws
(tightening torque = 5 to 6kgf•cm)
4
2-1. DISASSEMBLY
FLOW
2-2. UPPER CASE
(Page
2-1)
2-3. TRAY COVER ASSY
(Page
(Page
2-2)
2-8. SWITCHING REGULATOR
(Page 2-3)
2-7.
FRONT PANEL ASSY
(Page 2-4)
2-5. REAR PANEL
(Page
2-3)
2-6.
MB-140 BOARD
(Page 2-5)
2-4.
BD DRIVE
Boards &WLAN Card
(Page 2-2)
(Page 2-2)
SET
Upper case
FL-205, FR-313, IR-076
1
2-2
11
4
2
Two screws +BV3 (3-CR)
(tightening torque = 6 to 7 kgf•cm)
Front Panel
3 Harness (FLM-004)
CN331
FL-205 Board
2-4. FRONT PANEL ASSY, FL-205 , FR-313, IR-076 BOARD AND WLAN CARD
BDP-S780
2-3. TRAY COVER ASSY
tray
3 Tray cover assy
2
5
Eight hook
1
8 Two screws +BV3 (3-CR)
(tightening torque = 6 to 7 kgf•cm)
1 Insert a clip in the hole of a drive
to open a tray.
to open a tray.
FR-313 Board
10
One screws
(tightening torque = 6 to 7 kgf•cm)
+BV3 (3-CR)
Flat Flexible Cable (FIM-030)
9
13
WLAN card
CN702
6 Two screws
(tightening torque = 6 to 7 kgf•cm)
+BV3 (3-CR)
IR-076 Board
7
12
Harness,
CN603
CN603
Click on the first or last page to see other BDP-S780 service manuals if exist.