DOWNLOAD Sony BDP-BX57 / BDP-S570 Service Manual ↓ Size: 13.74 MB | Pages: 127 in PDF or view online for FREE

Model
BDP-BX57 BDP-S570
Pages
127
Size
13.74 MB
Type
PDF
Document
Service Manual
Brand
Device
DVD
File
bdp-bx57-bdp-s570.pdf
Date
PREV: Sony DVP-SR401HP / DVP-SR500H / DVP-SR500HP Service Manual

Sony BDP-BX57 / BDP-S570 Service Manual ▷ View online

1-22
BDP-BX57/S570
1-5.  HARNESS AND USB DRESSING
1-5-1. Harness (SIM-001)
 
- Harness (SIM-001) MUST ALWAYS under the board to board connector
1-5-2. USB (USB-007)
- USB Harness ALWAYS place on the chasis by using Non-Halogen tape
Follow the designated destination according to the mark indicated on the board
1-6.  Power Cord Soldering location
 
1-6-1. Soldering point for Switching Regulator (APS-257)
1-6-2. Soldering point for Switching Regulator (SRV2206UC)
- (BDP-BX57/S570: EXCEPT US, CND)
Mount the Power Supply Cord as indicated
- (BDP-BX57/S570: US, CND Only)
Mount the Power Supply Cord as indicated
1-23E
BDP-BX57/S570
1-7.  Avoid Switching Regulator Board (APS-257)  from Floating
 
 Stick the Non-Halogene tape
 as shown. Make sure the tape
 is strongly stick to both of
 MB-134 board and Switching 
 Regulation board.
 (BDP-S570 : AEP, UK, AUS)
1-8. Remove PT Protection on MB-134 (Service Assy Main Board)
PT Protector (4-186-977-01) stick on B-side to protect PT107 (1-780-638-22)
PT Protector need to be remove before installing the MB board on chassis
PT Protector (P/N 4-186-977-01)
PT 107 (P/N 1-780-638-22)
2-1
BDP-BX57/S570
SECTION  2
DISASSEMBLY
•  This set can be disassembled in the order shown below.
Note: Follow the disassembly procedure in the numerical order given.
2-2.  UPPER  CASE
tapping screw
(tightening torque = 5 to 6 kgf•cm)
1
tapping screw
(tightening torque =5 to 6 kgf•cm)
2 three screws
(tightening torque =  5.0  to 6.0kgf•cm)
3
2-1.  DISASSEMBLY FLOW
Upper case
2-2. UPPER CASE
(Page 2-1)
2-3. FRONT PANEL BLOCK
(Page 2-2)
2-4. BD DRIVE
(Page 2-3)
2-6. REAR PANEL BLOCK
(Page 2-4)
2-5. WIRELESS LAN CARD BLOCK
(Page 2-3)
2-8. SWITCHING REGULATOR
(Page 2-5)
2-7. MB-134 BOARD,
          HU-015 BORD
(Page 2-4)
SET
2-2
2-3.  FRONT  PANEL  BLOCK
4 Two Coaxial Cables
black
gray
6
Front Panel Block
3
Seven Claws
  Tray cover assy
2
1
Eject 
5
Harness (CN1509)
BDP-BX57/S570
hook
rib
Coaxial-B
ANT-
008
slit
hook
rib
Coaxial-B
ANT-
008
slit
ANT-
007
SWP
-002
hook
slit
Coax
ial -W
ANT-
007
SWP
-002
hook
slit
Coax
ial -W
SWB
-001
slit
SWB
-001
slit
Arrangementof coaxial cable and harness dressing
Page of 127
Display

Click on the first or last page to see other BDP-BX57 / BDP-S570 service manuals if exist.

RANDOM: