DOWNLOAD Sony BDP-BX110 / BDP-BX310 / BDP-S1100 / BDP-S3100 Service Manual ↓ Size: 4.31 MB | Pages: 68 in PDF or view online for FREE

1-14

X

X

X

X

X

X

1)  At the display of Sub menu4, 1. Color Bar 100% is selectively displayed.
2)  Selection of 1. Color Bar 100% 

t  Return to Sub menu4 after seamless playback from T22_C1 to T22_C13.  1. Color Bar 100% is 

selectively displayed on Sub menu4 screen.

3)  Selection of 2. Color Bar 75% 

t  Return to Sub menu4 after seamless playback from T22_C2 to T22_C13.  1. Color Bar 100% is se-

lectively displayed on Sub menu4 screen.

4)  At the selection of 3 - 13, item 3 mentioned above is executed as the routine.
5)  At the display of Sub menu4, Main Menu is selected 

t  Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 59.94Hz/720P 

is selectively displayed.

6)  Selection of LPCM Audio 

t  Playback from T44_C1 to T50_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.

 

During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to 
Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen.

7)  Selection of Dolby AC-3 Audio 

t  Playback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed.

 

During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to 
Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen.

8)  Selection of Motion Picture 

t  Return to Sub menu4 after playback of T52_C1.  1. Color Bar 100% is selectively displayed on Sub 

menu4 screen.

9) Selection 

of 

AV 

Sync 

t  Return to Sub menu4 after playback of T68_C1.  1. Color Bar 100% is selectively displayed on Sub menu4 

screen.

10) At the selection of Main Menu, 1. Video Signal of 720/59.94P of Main Menu is selectively displayed.

No

No

Yes

Yes

Yes

Yes

No

No

No

Yes

1-15

• 

ESD Measures 
It is necessary to check the working space ESD condition
before starting the Drive Part (BU) repairs
The ESD-resistance of BD Laser is weaker than DVD/CD Laser
To prevent ESD destruction, please make sure the working
space and human ESD.

BDP-S1100/BX110/S3100/

BX310

can play the BD-disc

BDP

can play the DVD/CD-disc

Check Drive Power Supply

IC210 Pin 3: 5V

Q211 Pin 6: 12V

Check / replace the FFC cable, then check

BDP-S1100/BX110/S3100/BX310

 operates normally

OP FFC cable (1-846-389-11)

OK

Check PS201, PS202

Replace PS when open

Check the Optical Block Unit (BU) by

service mode. (Flowchart zz)

BU IOP is OK?

Replace the Optical Block Unit (BU)

Optical Block Unit (BU) replace

(Flowchart yy)

BLX-104

Drive fl owchart

DVD: HLX-513
CD: HLX-A1

Optical Block Unit or BU No problem

BU Replacement

Optical Block Unit (BU) IOP check fl ow (zz) ~ [Before BU Replacement]

 

                   BDP-S1100/BX110/S3100/BX310 series component structure is as same as conventional DVD Players.
            However BD player requires precise read out functions and also secure contents Protection system.
            Since above requirement, it is necessary to set/adjust BU data to EEPROM.

            The following cases need Adjustments;
 

(1)Replace BU (MB is original)

 

(2)Replace MB (BU is original)

 

(3)Replace both BU and MB

            •JIG Requirement
 

Digital camera (recommend with macro mode)

 

Barcode decoder (BDPRdec_ver3.0) installed in JIG PC’s

 USB 

memory

 

ESD work bench

            •Procedure (all cases) Refer the diagram

         Remarks:

                The servo adjustment procedure will be carried out during OP data Writing.

         There is no manual adjustment procedure. LD ON TIME history doesn’t carry over.

         Do not touch any optical block parts, Turn Table and during replacing. BD Laser diode

         is very sensitive!

No

1-16

Enter Service Mode

Press <OPEN/CLOSE>., <PLAY>,<STOP>

and plug in AC Power

Inside *Service Mode Menu

Select [8] Drive

Inside *Drive

Select [7] OP Check Menu

Inside *OP Check Menu

Select [3] dIOP then press ‘ENTER’

Specifi cation dIOP

BD: ± 6mA

DVD, CD: ± 9mA

AC Power OFF

IOP out of specifi cation need BU

replacement

Optical Block Unit (BU) replace

(Flowchart yy)

Optical Block Unit (BU) OP Data Write Flow (yy) ~ [After BU/MB Replacement]

KEM-480AAA/C2RP1
Packing Spec.

KEM-480AAA/C2RP2
Packing Spec.

Open a box

Take a top covered
cushion out

Don’t touch the area!!

Open a bag

Take BU out

䐟

䐠

䐡

䐢

䐣

䐤

䐥

䐦

䐧

Take BU out

Don’t Reuse the bag!!

1-17

Remove the defective BU from Loading

Assy and also remove BU insulator (4pcs)

 The following cases need OP Data Write:
     (1) Replace BU (MB is original)
     (2) Replace MB (BU is original)
     (3) Replace b oth BU and MB
 JIG req uirement
     Digitalcamera (with macro mode)
     Barcode decoder (BDPRdec.exe)
     installed in jig
     PC’s (jig purpose)
     USB memory
     ESD free work bench

Unpack new BU and take OP Data Barcode

photo by camera

Assemble BU with Insulators to Loading

As sy (tighten screw wi th 2kgf)

Decode the OP Data Barcode photo using

BDPRdec.exe and save the test data to

USB memory 

(File Name: BuData.txt)

Enter Service Mode and insert USB memory

to USB connector

Select [8] Drive -->

Selec t [1] Drive OP data W rite -->

Select mode : 1 or 2

Press ENT ER

  Explanation :
               Mode 1 : BDV set
               Mode 2 : BDP set

After Finishing ReWrite OP data

--> Turn AC Power OFF

And confi rm dIOP by select [7] OP Check

Menu to verify IOP in specifi cation

IOP in specifi cation --> Turn AC Power OFF

Turn Power ON and check playback

performance using BD, DVD and CD

BLX-104

DVD: HLX-513
CD: HLX-A1