Sony SAL20TC Service Manual ▷ View online
HELP
SAL20TC (2x TELE CONVERTER) (2 X Teleconverter)
HELP17
Adhesive bond (LOCTITE 460)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent aeticle.
Don’t use what becomes white after drying like a quick-drying giue.
Anti-diffusion agent (A-20): J-6082-611-A
1.
Apply the adhesive bond (LOCTITE 460) to the stopper screw and tighten it.
2.
Apply the anti-diffusion (A-20) to the instruction part of the lens mount block.
3.
Four screws that installs lens mount block tighten in numberical order shown in the figure.
HELP18
Anti-diffusion agent (A-20): J-6082-611-A
1.
Apply the anti-diffusion agent (A-20) to the instrction part of the fixed barrel.
2.
BL contact holder block and ground spring A are put and after building in, protector rubber is installed in fixed barrel.
Note:
Be careful not to damage A part of fixed tube.
HELP19
It is done up that the point of lock spring is thin.
Apply the anti-diffusion agent (A-20)
Fixed Barrel
Protector Rubber
A part
Apply the anti-diffusion agent (A-20)
(All circumference of threaded portion)
(All circumference of threaded portion)
Apply the adhesive bond (LOCTITE 460)
1
2
3
4
Coupler Hole
Lock Spring
Connect Ring
3-1
SAL20TC (2x TELE CONVERTER) (2 X Teleconverter)
3. REPAIR PARTS LIST
3-1.
EXPLODED VIEWS
3-1-1. LENS MOUNT BLOCK, LENS BLOCK AND BODY A MOUNT
DISASSEMBLY
Ref. No.
Part No.
Description
1
2-687-605-01 BARREL (REAR LIGHT SHIELD BARREL)
2
2-684-064-01 SCREW M1.4 X 2.2
3
2-684-065-01 GROUND SPRING
4
2-684-066-01 TAPPING SCREW M1.7 X 4.0
5
A-1205-868-A BLOCK, LENS MOUNT
6
2-684-244-01 STOPPER SCREW
7
2-687-685-01 SCREW M2.0 X 4.0
8
A-1206-041-A BLOCK, LENS
NOTE:
•
-XX and -X mean standardized parts, so they may
have some difference from the original one.
have some difference from the original one.
•
Items marked “*” are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
seldom required for routine service. Some delay
should be anticipated when ordering these items.
•
The mechanical parts with no reference number in
the exploded views are not supplied.
the exploded views are not supplied.
9
Selection part
BACK ADJUSTMENT WASHER A to E (Note1)
10
2-687-711-01 SHAFT (COUPLER)
11
2-684-217-01 STEEL BALL
12
2-687-643-01 RING SPRING
13
2-687-661-01 SCREW (SCREW NUT)
14
2-687-638-01 BODY A MOUNT
15
2-687-686-01 SCREW M2.0 X 2.5
Ref. No.
Part No.
Description
(Note 1)
The number or type of these parts need to be selected
according to adjustment etc..
Select the part referring to page 3-3.
according to adjustment etc..
Select the part referring to page 3-3.
Ver 1.1 2007.01
1
6
10
13
9
12
14
7
7
7
15
2
3
4
2
7
7
5
7
8
11
(Note 1)
(See Page 3-2.)
3-2
SAL20TC (2x TELE CONVERTER) (2 X Teleconverter)
3-1-2. CONNECT RING AND FIXED TUBE
DISASSEMBLY
Ref. No.
Part No.
Description
51
2-687-746-01 RING (CONNECT RING)
52
2-695-858-01 LABEL, MODEL NAME
53
2-687-670-01 MAIN SPRING HOOK
54
2-687-691-01 SCREW M1.6X 2.5
55
2-687-663-01 MAIN SPRING
56
2-687-727-01 FLEXIBLE SUBSTRATE BASE PLATE
57
2-683-692-01 CHIP (MOUNT INDEX)
58
2-684-171-01 STEEL BALL
59
2-687-722-01 RETAINER
60
2-687-724-01 PRESET RING
61
2-687-723-01 MAIN SPRING HOOK
62
2-687-644-01 PRESET LEVER
63
2-687-732-01 PRESET LEVER B
64
2-687-721-01 PRESET RING HOLDING PLATE
65
2-687-743-01 SCREW M1.6X 7.0
66
A-1206-038-A BLOCK, GEAR (BC)
67
2-687-715-01 PIN (GEAR BASE PLATE SPACER)
68
A-1206-037-A BLOCK, GEAR (A)
Ref. No.
Part No.
Description
69
2-687-734-01 STOPPER SCREW
70
2-687-642-01 BASE PLATE POSITIONING PIN
71
2-687-689-01 SCREW M2.0 X 4.0
72
A-1206-039-A BLOCK, COUPLER SHAFT
73
2-684-223-01 E RING
74
2-687-709-01 BARREL (FIXED BARREL)
75
A-1205-866-A LOCK HOLD LEVER BLOCK
76
2-687-662-01 GROUND SPRING A
77
A-1206-035-A BLOCK, BL CONTACT HOLDER
78
2-687-690-01 SCREW M1.6 X 3.0
79
2-687-693-01 SEMIOVAL SCREW M1.6 X 4.5
80
2-687-610-01 KNOB (LOCK RELEASE LEVER)
81
2-687-657-01 LOCK PIN
82
2-687-735-01 PROTECTOR RUBBER
83
A-1206-040-A LEVER BASE PLATE UNIT
84
2-687-659-01 HOLDING LEVER SPRING
85
2-687-660-01 LOCK SPRING
82
74
71
76
83
75
80
81
51
53
60
59
64
62
63
57
56
B
B
55
54
54
54
58
54
68
66
69
67
67
72
73
78
70
71
77
78
54
79
84
52
61
85
65
C
C
3-3
SAL20TC (2x TELE CONVERTER) (2 X Teleconverter)
3-1-3. SELECTION PARTS
Ref. No.9
These washers are provided for flange back adjustment.
Change the thickness (t) according to result of adjustment.
Change the thickness (t) according to result of adjustment.
Part No.
Description
2-687-648-01 BACK ADJUSTMENT WASHER A (T=0.05 mm)
2-687-649-01 BACK ADJUSTMENT WASHER B (T=0.07 mm)
2-687-650-01 BACK ADJUSTMENT WASHER C (T=0.1 mm)
2-687-651-01 BACK ADJUSTMENT WASHER D (T=0.2 mm)
2-687-652-01 BACK ADJUSTMENT WASHER E (T=0.5 mm)
2-687-649-01 BACK ADJUSTMENT WASHER B (T=0.07 mm)
2-687-650-01 BACK ADJUSTMENT WASHER C (T=0.1 mm)
2-687-651-01 BACK ADJUSTMENT WASHER D (T=0.2 mm)
2-687-652-01 BACK ADJUSTMENT WASHER E (T=0.5 mm)
3-2.
SUPPLIED ACCESSORIES
Checking supplied accessories.
Other accessories
2-685-152-11 MANUAL, INSTRUCTION (ENGLISH) (US, CND, AEP)
2-685-152-21 MANUAL, INSTRUCTION (FRENCH) (US, CND, AEP)
2-685-152-31 MANUAL, INSTRUCTION (GERMAN) (AEP)
2-685-152-41 MANUAL, INSTRUCTION (SPANISH) (AEP)
2-685-152-51 MANUAL, INSTRUCTION (DUTCH) (AEP)
2-685-152-21 MANUAL, INSTRUCTION (FRENCH) (US, CND, AEP)
2-685-152-31 MANUAL, INSTRUCTION (GERMAN) (AEP)
2-685-152-41 MANUAL, INSTRUCTION (SPANISH) (AEP)
2-685-152-51 MANUAL, INSTRUCTION (DUTCH) (AEP)
2-685-152-61 MANUAL, INSTRUCTION (SWEDISH) (AEP)
2-685-152-71 MANUAL, INSTRUCTION (ITALIAN) (AEP)
2-685-152-81 MANUAL, INSTRUCTION (PORTUGUESE) (AEP)
2-685-152-91 MANUAL, INSTRUCTION (RUSSIAN) (AEP)
2-685-153-11 MANUAL, INSTRUCTION (ARABIC) (AEP)
2-685-152-71 MANUAL, INSTRUCTION (ITALIAN) (AEP)
2-685-152-81 MANUAL, INSTRUCTION (PORTUGUESE) (AEP)
2-685-152-91 MANUAL, INSTRUCTION (RUSSIAN) (AEP)
2-685-153-11 MANUAL, INSTRUCTION (ARABIC) (AEP)
2-685-153-21 MANUAL, INSTRUCTION (TRADITIONAL CHINESE) (AEP)
2-685-153-31 MANUAL, INSTRUCTION (SIMPLIFIED CHINESE) (AEP, CH)
2-685-153-41 MANUAL, INSTRUCTION (KOREAN) (AEP)
2-685-153-31 MANUAL, INSTRUCTION (SIMPLIFIED CHINESE) (AEP, CH)
2-685-153-41 MANUAL, INSTRUCTION (KOREAN) (AEP)
Lens Case
2-694-838-01
Front Lens Cap
2-688-728-01
Rear Lens Cap
2-683-615-01
Click on the first or last page to see other SAL20TC service manuals if exist.