Sony SAL1680Z Service Manual ▷ View online
HELP
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
*
DT 16-80mm F3.5-4.5 ZA)
HELP04
1.
Peel the released paper from the brush cover (B) and affix it to the concave side of zoom barrel as shown in the figure, referring the
boundary in concave and convex sides as a reference.
2.
Likewise, peel the released paper from the brush cover (C) and affix it to the concave side of zoom barrel as shown in the figure,
referring the boundary in concave and convex sides as a reference.
Zoom Barrel
Brush Cover (B)
Reference to affixing
(Boundary in convex and concave)
(Boundary in convex and concave)
Released Paper
Zoom Barrel
Brush Cover (C)
Reference to affixing
(Boundary in convex
and concave)
(Boundary in convex
and concave)
Released Paper
HELP
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
*
DT 16-80mm F3.5-4.5 ZA)
HELP05
1.
Inserting the projection of zoom barrel in the square hole at the center of brush, install the zoom brush and move it in the arrow
direction.
2.
Affix the polyester tape cut as instructed to the location shown in the figure.
Zoom Barrel
Projection
Square hole
Zoom Brush
Zoom Brush
Polyester Tape (4x40mm)
HELP
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
*
DT 16-80mm F3.5-4.5 ZA)
3.
Affix the polyester tape cut as instructed to the brush cover (D) as shown in the figure.
4.
Install the brush cover (D) at the position shown in the figure and fix it with the polyester tape.
Zoom Brush
Zoom Brush
. Details of affixing position
Almost same
length
length
Brush Cover (D)
Brush Cover (D)
Polyester Tape
(4x20mm)
(4x20mm)
Polyester Tape
(4x20mm)
(4x20mm)
HELP
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
*
DT 16-80mm F3.5-4.5 ZA)
HELP06
Grease (G-115): J-6082-627-A
Grease (G-117): J-6082-660-A
1.
Apply the grease (G-A) to the indicated portion of zoom hold ring.
Grease (G-A) = (G-115 : G-117 = 1 : 2)(Mix grease at the following rates before using the grease, and mix grease enough.)
2.
Install the zoom hold ring, placing its mount index at the position shown in the figure. Then, tighten three screws to fix zoom hold
ring. When tightening one of three screws, remove the part of Lno. Decoration plate.
Lno. Decoration
Plate
Plate
Screw
Screw
Mount Index
Screw
Zoom Hold Ring
Apply the grease
(G-A)
(All circumference)
(G-A)
(All circumference)
Click on the first or last page to see other SAL1680Z service manuals if exist.