Sony SAL1680Z (serv.man3) Service Manual ▷ View online
SERVICE MANUAL
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
*
DT 16-80mm F3.5-4.5 ZA)
Sony EMCS Co.
Ver. 1.4 2008.08
2008H0800-1
© 2008.08
Published by Kohda TEC
US Model
Canadian Model
AEP Model
Chinese Model
SUPPLEMENT-1
File this supplement with the service manual.
(DI08-232)
•
Addition of Repair Parts
•
Change of HELP21 and HELP28
9-852-120-82
Page
2. DISASSEMBLY
2-1.
DISASSEMBLY
Before change
After change
2-6
&
: Points added portion.
5
Zoom Cam Ring
HELP28
HELP26
3
4th Operation Plate
SAL1680Z
(Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
*
DT 16-80mm F3.5-4.5 ZA)
2-1-5.
REAR BARREL ASSY, ZOOM CAM RING
AND FOCUS COUPLING BARREL ASSY
AND FOCUS COUPLING BARREL ASSY
2-1-5.
REAR BARREL ASSY, ZOOM CAM RING
AND FOCUS COUPLING BARREL ASSY
AND FOCUS COUPLING BARREL ASSY
5
Zoom Cam Ring
HELP28
HELP26
3
4th Operation Plate
— 2 —
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
*
DT 16-80mm F3.5-4.5 ZA)
HELP21
1.
Rotate fully clockwise (in the arrow direction) the focus operation ring in the outer barrel service assembly.
2.
Rotate fully clockwise (in the arrow direction) the focus lens holder in the outer tube block.
3.
Inserting the installation part of coupler in the cut portion of outer tube block, assemble the outer barrel assembly.
At this moment, insert the lever of focus operation ring in the lever groove of focus lens holder.
4.
While pushing and rotating clockwise the outer barrel assembly, tighten diagonally four screws shown in the figure.
Before change
HELP21
1.
Rotate fully clockwise (in the arrow direction 1) the focus operation ring in the outer barrel service assembly.
2.
Rotate fully clockwise (in the arrow direction 2) the focus lens holder in the outer tube block.
3.
Inserting the installation part of coupler in the cut portion of outer tube block, assemble the outer barrel assembly.
At this moment, insert the lever of focus operation ring in the lever groove of focus lens holder.
4.
While pushing and rotating clockwise (in the arrow direction 3) the outer barrel assembly and outer tube block, tighten diago-
nally four screws shown in the figure.
After change
&
: Points added portion.
)
)
)
)
AF coupler installing position
Outer Barrel Service Assy
Focus Operation Ring
Cut Portion
Focus Lens Holder
Outer Tube Block
Screw
1
3
3
2
— 3 —
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
*
DT 16-80mm F3.5-4.5 ZA)
HELP28
Grease (G-116): J-6082-628-A
Grease (G-117): J-6082-660-A
Apply the following grease (G-B) to the indicated portion of zoom cam ring.
Grease (G-B) = (G-116 : G-117 = 1 : 2)(Mix grease at the following rates before using the grease, and mix grease enough.)
Before change
Apply the grease
(G-B)
(All circumferences)
(G-B)
(All circumferences)
Apply the grease (G-B) (Vertical groove)
Apply the grease
(G-B)
(All guide grooves)
(G-B)
(All guide grooves)
HELP28
Grease (G-116): J-6082-628-A
Grease (G-117): J-6082-660-A
1.
Apply the following grease (G-B) to the indicated portion of zoom cam ring.
Grease (G-B) = (G-116 : G-117 = 1 : 2)(Mix grease at the following rates before using the grease, and mix grease enough.)
2.
Affix the friction sheet B to the specified position of the zoom cam ring. (two locations)
After change
Apply the grease
(G-B)
(All circumferences)
(G-B)
(All circumferences)
Apply the grease (G-B) (Vertical groove)
Friction sheet B
Friction sheet B
Apply the grease (G-B)
Do not apply the grease on the affixing area
of the friction sheet B.
(Apply the grease avoid the friction sheet B )
Do not apply the grease on the affixing area
of the friction sheet B.
(Apply the grease avoid the friction sheet B )
Apply the grease
(G-B)
(All guide grooves)
(G-B)
(All guide grooves)
&
: Points added portion.
Friction sheet B
Zoom cam ring
)
— 4 —
SAL1680Z (Vario-Sonnar DT 3.5-4.5/16-80 ZA) (Vario-Sonnar T
*
DT 16-80mm F3.5-4.5 ZA)
Page
3. REPAIR PARTS LIST
3-1.
EXPLODED VIEWS
Before change
After change
3-4
&
: Points added portion.
: Points changed portion.
3-1-4.
MAIN FLEXIBLE UNIT, FOCUS RING AND MF
OPERATION RING
OPERATION RING
3-1-4.
MAIN FLEXIBLE UNIT, FOCUS RING AND MF
OPERATION RING
OPERATION RING
Ref. No.
Part No.
Description
168
3-197-072-01 OUTER BARREL
Ref. No.
Part No.
Description
168
3-197-072-02 OUTER BARREL
3-1-5.
REAR BARREL ASSY, ZOOM CAM RING
AND FOCUS COUPLING BARREL ASSY
AND FOCUS COUPLING BARREL ASSY
3-1-5.
REAR BARREL ASSY, ZOOM CAM RING
AND FOCUS COUPLING BARREL ASSY
AND FOCUS COUPLING BARREL ASSY
202
204
207
203
9
202
204
207
203
9
213
213
Ref. No.
Part No.
Description
———
—————
———————
Ref. No.
Part No.
Description
213
3-197-200-01 FRICTION SHEET B
3-5
)
Display
