Sony SAL1635Z Service Manual ▷ View online
HELP
SAL1635Z (Vario-Sonnar 2.8/16-35 ZA T
*
SSM) (Vario-Sonnar T
*
16-35mm F2.8 ZA SSM)
HELP02
Adhesive bond (LOCTITE 460)
Grease (G-115): J-6082-627-A
Note:
Use the adhesive bond (LOCTITE 460) or the equivalent.)
Do not use the instant glue which becomes white when dried.
1.
Apply the adhesive bond (LOCTITE 460) to the indicated portion of rear outer block assy and install the chip (mount index).
2.
Apply the grease (G-115) the indicated portion of rear outer block assy.
Chip (Mount Index)
Glued Surface
Fill the adhesive bond in the hole
to the extent of a little swell.
to the extent of a little swell.
Rear Outer Block Assy
LOCTITE 460
or the equivalent
or the equivalent
Slip Portion
Rear Outer Block Assy
Bearing Surface
Wall Surface
Apply the grease (G-115)
(All circumference)
(All circumference)
Apply the grease (G-115)
(All circumference)
(All circumference)
HELP
SAL1635Z (Vario-Sonnar 2.8/16-35 ZA T
*
SSM) (Vario-Sonnar T
*
16-35mm F2.8 ZA SSM)
HELP03
1.
Install three flexible boards and one part to be soldered to the SSM PC board assy and fix them with two screws.
2.
After soldering the SSM flexible board, make folds.
Note:
Use the plastic tweezers.
3.
Fold the SSM flexible board and fix it with the polyimide sheet by covering.
Note:
Be careful for the polyimide sheet not to protrude to the groove (SSM PC board assy) for lever of aperture preset lever.
Solder Installation
position
position
SSM PC Board Assy
Encoder Flexible
Board
Board
MR Flexible Board
SSM Flexible Board
SW Flexible Board
SSM Flexible Board
SSM Flexible Board
SSM Flexible Board
Polyimide Sheet
Be careful for the polyimide sheet not to protrude
to the groove for lever of aperture preset lever.
to the groove for lever of aperture preset lever.
Tweezers
SSM PC Board Assy
SSM PC Board Assy
HELP
SAL1635Z (Vario-Sonnar 2.8/16-35 ZA T
*
SSM) (Vario-Sonnar T
*
16-35mm F2.8 ZA SSM)
HELP04
1.
Cut the tips of brush.
HELP05
Adhesive Bond (B-10): J-6082-612-A
1.
Insert the tip of zoom linkage plate in the U groove of the zoom cam barrel and align the dowels of zoom linkage plate with bosses of
zoom barrel at two locations.
2.
Fix the zoom linkage plate with two screws and apply the adhesive bond (B-10) to the heads of screws (at two locations).
Brush
Tip Portion
Tip Portion
Brush
Zoom Linkage Plate
U groove of Zoom Cam Barrel
Bosses of Zoom Barrel
Dowel of Zoom
Linkage Plate
Linkage Plate
Apply the adhesive
bond (B-10).
bond (B-10).
Zoom Linkage Plate
Two Screws
HELP
SAL1635Z (Vario-Sonnar 2.8/16-35 ZA T
*
SSM) (Vario-Sonnar T
*
16-35mm F2.8 ZA SSM)
HELP06
Anti-diffusion agent (A-20): J-6082-611-A
Grease(FT-210): 7-640-018-91
Grease(G-85): J-6082-626-A
1.
Apply the anti-diffusion agent (A-20) to the indicated portion of zoom barrel. (two locations)
2.
Apply the grease (FT-210) to the indicated portion of zoom barrel.
3.
Apply the grease (G-85) to the indicated portion of zoom barrel.
4.
Apply the grease (G-85) to the indicated portion of zoom barrel. (Dents at two locations)
Zoom Barrel
Apply the anti-diffusion
agent (A-20) (The surface of a
wall of a holl and the direction part)
agent (A-20) (The surface of a
wall of a holl and the direction part)
Apply the anti-diffusion
agent (A-20) (All the surface-of-a-wall
circumferences and the direction part)
agent (A-20) (All the surface-of-a-wall
circumferences and the direction part)
Apply the grease (FT-210)
(All circumference)
(All circumference)
Zoom Barrel
Apply the grease (G-85)
(All circumference)
(All circumference)
Apply the grease (G-85)
Dents
Apply the grease (G-85)
Click on the first or last page to see other SAL1635Z service manuals if exist.