Sony SAL135F28 Service Manual ▷ View online
HELP
SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)
HELP28
Affix the front decoration plate, aligning its character [T] with the index line.
HELP29
Adhesive bond (B-10): J-6082-612-A
1.
Attach the G1 stopper.
Note:
Please tighten surely universal wrench.
Please do not damage the lens.
2.
Apply the adhesive bond (B-10) more than the half of the circumference of screw portion of front frame.
Note:
Apply the adhesive bond so that it can not be visible from exterior.
G1 Stopper
Front Frame
Apply the Adhesive Bond (B-10)
(more than the half of the circumference
of screw portion)
(more than the half of the circumference
of screw portion)
Index Line
Front Decoration Plate
Character [T]
G1 Stopper
HELP
SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)
HELP30
Adhesive bond (B-10): J-6082-612-A
1.
Apply the adhesive bond (B-10) in the width of 10 mm to the two instruction portions of the front frame as shown in the figure.
2.
Attach the G2 stopper.
Note:
Apply the adhesive bond so that it can not be visible from exterior.
HELP31
Be sure to replace the lens (G2+G3) and station adjustment washer as a set.
Different combination may cause the flange back adjustment not available.
When replacing the lens (G2+G3) with the service parts, check enclosed insert for its compensation value. Then select the suitable station
adjustment washer according to the Table-1 below.
Note:
Never separate the lens (G2+G3) and insert. The compensation value is not written on the parts.
Compensation value of lens
Compensation value of lens (G2+G3)
Combination of station adjustment washer
+0.05 to +0.03
Curver field adjustment washer C
+0.02 to -0.02
Curver field adjustment washer A x 2
–0.03 to –0.05
Curver field adjustment washer B x 2 and Curver field adjustment washer C
Curver field adjustment washer
Part No.
Description
Thickness (mm)
2-688-957-01
Curver field adjustment washer A
0.192
2-688-958-01
Curver field adjustment washer B
0.105
2-688-959-01
Curver field adjustment washer C
0.255
G2 Stopper
Front Frame
Apply the Adhesive Bond
(B-10) (Two areas)
(B-10) (Two areas)
G2 Stopper
Ver 1.2 2007.01
HELP
SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)
HELP32
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-10):
J-6082-612-A
1.
Attach the G6 hold ring washer.
2.
Apply the adhesive bond (B-10) in the width of 5 mm to the two instruction portions of the G6 hold ring washer as shown in the figure.
3.
Apply the anti-diffusion agent (A-20) to the instruction portion of the 2 group front frame block as shown in the figure.
HELP33
Adhesive bond (B-10): J-6082-612-A
1.
Attach the G7 hold ring washer.
2.
Apply the adhesive bond (B-10) in the width of 5 mm to the two instruction portions of the G7 hold ring washer as shown in the figure.
HELP34
Adhesive bond (B-10): J-6082-612-A
1.
Attach the G8 stopper.
2.
Apply the adhesive bond (B-10) in the width of 5 mm to the two instruction portions of the G8 stopper as shown in the figure.
Apply the adhesive Bond
(B-10) (Two areas)
(B-10) (Two areas)
G6 Hold Ring Washer
Apply the anti-diffusion agent
(A-20)
(A-20)
2 Group Front Frame Block
G7 Hold Ring Washer
Apply the Adhesive Bond
(B-10) (Two areas)
(B-10) (Two areas)
G8 Stopper
Apply the Adhesive Bond
(B-10) (Two areas)
(B-10) (Two areas)
HELP
SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)
HELP35
Adhesive bond (B-10): J-6082-612-A
1.
Apply adhesive bond (B-10) in the width of 5 mm to the two instruction portions of the 2 group rear frame block as shown in the
figure.
2.
Screw the 2 group front frame block.
2 Group
Rear Frame Block
Rear Frame Block
2 Group
Front Frame Block
Front Frame Block
Apply the Adhesive Bond
(B-10) (Two areas)
(B-10) (Two areas)
Click on the first or last page to see other SAL135F28 service manuals if exist.