Sony SAL135F28 Service Manual ▷ View online
HELP
SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)
HELP10
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-40):
J6082-614-A
1.
Apply the anti-diffusion agent (A-20) to the insutruction portions of the connection barrel as shown in the figure.
2.
Attach the connection barrel, and apply the adhesive bond (B-40) to the three screws and tighten them as shown in the figure.
Apply the Anti-Diffusion Agent (A-20)
Apply the Anti-Diffusion Agent (A-20)
(All circumference of back side)
(All circumference of back side)
Apply Adhesive Bond (B-40) (Three areas)
HELP
SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)
HELP11
1.
Affix the flexible substrate setting tape to the connection barrel, and then open a hole as the instruction portion shows.
2.
Affix the main flexible unit to the flexible substrate setting tape so that the instruction portion align.
3.
Fold the main flexible unit inside as shown in figure, and affix the flexible substrate setting tape (two areas).
Aligns Each
Hole
Hole
Make a hole
Substrate Setting Tape
Hole
Main Flexible Unit
Main Flexible Unit
Flexible Substrate Setting Tape
HELP
SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)
M Aperture Operation Ring
Index Ring
Click Spring
Steel Ball
M Aperture Operation Ring
M Aperture Connecting Plate B
M Aperture Connecting Plate A
Inside of Tube
Apply the Adhesive Bond
(B-40) (Two areas)
(B-40) (Two areas)
Screws
HELP12
Adhesive bond (B-10): J-6082-612-A
Adhesive bond (B-40): J-6082-614-A
Grease (G-85):
J-6082-626-A
1.
Attach the M aperture connecting plate B to the M aperture connecting plate A, and apply the adhesive bond (B-40) to the two screws
and tighten them as shown in the figure.
Note:
Be sure to attach the M aperture connecting plate B so that the rounded edge of it faces toward inside of the tube as shown in
the figure.
2.
Attach the M aperture connecting plate A to the M aperture operation ring, and tighten them with the two screws as shown in the
figure.
3.
Apply the adhesive bond (B-10) to the two areas as shown in the figure.
4.
Apply the grease (G-85) to the instruction portion of the M aperture operation ring as shown in the figure.
5.
Set the click spring and steel ball to the index ring, and assemble the M aperture operation ring to the index ring from the direction
shown in the figure.
6.
After assembling, check that the proper click exists when rotating the M aperture operation ring.
M Aperture Operation Ring
Apply the Grease (G-85)
(All circumference)
(All circumference)
Apply the Adhesive Bond (B-10) (Two areas)
HELP
SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)
HELP13
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-40):
J-6082-614-A
Grease (G-85):
J-6082-626-A
1.
Apply the anti-diffusion agent (A-20) and the grease (G-85) to the instruction portions of the index ring as shown in the figure.
2.
Attach the index ring. Apply the adhesive bond (B-40) to the three screws, and then fix the index ring with these screws as shown in
the figure.
HELP14
Anti-diffusion agent (A-20): J-6082-611-A
Apply the anti-diffusion agent (A-20) to the instruction portions of the distance scale tube as shown in the figure.
Apply the adhesive bond (B-40)
(Three areas)
(Three areas)
Apply the grease (G-85)
(All circumference)
(All circumference)
Apply the anti-diffusion agent (A-20)
(All circumference)
(All circumference)
Apply the anti-diffusion agent (A-20)
(All circumference on edge)
(All circumference on edge)
Distance Scale Tube
Apply the
Anti-Diffusion
Agent (A-20)
(All circumferences)
Anti-Diffusion
Agent (A-20)
(All circumferences)
Click on the first or last page to see other SAL135F28 service manuals if exist.