Sony NEX-F3D / NEX-F3K / NEX-F3Y Service Manual ▷ View online
NEX-F3D/F3K/F3Y_L2
2-7
2-1-5. IMAGER BLOCK SECTION
ns: not supplied
DISASSEMBLY
1. Remove in numerical order (
1
to
5
) in the left figure.
Screw
#3: M1.7 X 2.5
(Red)
2-660-401-01
2-660-401-01
2.5
1.7
1
#267 X 3
Back View
#267
3
#230 X 1
Back View
#230
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
201
A-1886-976-A CAB F B-ASSY (SERVICE) (BK) (BLACK) (Note 5)
201
A-1886-977-A CAB F B-ASSY (SERVICE) (SL) (SILVER) (Note 5)
201
A-1886-978-A CAB F B-ASSY (SERVICE) (PI) (PINK) (Note 5)
201
A-1886-979-A CAB F B-ASSY (SERVICE) (WH) (WHITE) (Note 5)
* 202
Selection Parts IM WASHER (A), ADJUST (Note 2, 3)
* 203
Selection Parts IM WASHER (B), ADJUST (Note 2, 3)
* 204
Selection Parts IM WASHER (C), ADJUST (Note 2, 3)
205
A-1868-253-A MB CHARGE UNIT (757)
206
1-487-619-21
SHUTTER UNIT (H094)
207
4-277-282-11
MB SHEET (754), MASK (Note 4)
208
4-281-196-01
SHEET, MASK SHEET ADHESIVE (Note 4)
209
4-430-449-01
HEAT SINK (720), TOP
210
4-430-450-01
SHEET (TOP (720)), RADIATION
211
4-430-446-01
SHEET (IS (720)), RADIATION
#3
2-660-401-01
SCREW (M1.7), NEW TRU-STAR, P2
#197
4-185-990-01
MB SCREW, CHARGE UNIT FIXED
#230
4-287-434-01
TAPPING (1.7 (ECOLOGY))
#267 4-287-436-21 SCREW
(M1.7)
#197: M1.6 X 4.5 (Tapping)
(Silver)
4-185-990-01
(Silver)
4-185-990-01
4.5
1.6
#3
#230
#267
ns
Imager Unit Section
(See page 2-8)
206
202
(Note 2, 3)
203
(Note 2, 3)
207
208
211
209
210
204
(Note 2, 3)
205
Cabinet Front Section
(See page 2-9)
201
(including CP6001 (CMOS imager)
and IS-101 complete board)
(Note 5)
and IS-101 complete board)
(Note 5)
#197
(Note 1)
(Note 4)
(Note 4)
#230:
4.0
1.7
M1.7 X 4.0 (Tapping)
(Black)
4-287-434-01
(Black)
4-287-434-01
5
#3 X 1
Back View
#3
Note 1: Refer to “Assembly-1: Screw tightening sequence when
assembling the Heat Sink (IM).”.
Note 1: Assembly-1: Screw tightening sequence when assembling
the Heat Sink (IM). を参照してください。
Note 2: The IM adjust washers (A, B, C) differ in thickness.
Make sure to return the removed IM adjust washers to origi-
nal places.
nal places.
When replacing IM adjust washers, refer to “2-2. SELEC-
TION PARTS” on page 2-10.
TION PARTS” on page 2-10.
If the original state cannot be restored due to loss of the
IM adjust washer, for example, replace the CAB F B-Assy
(Service).
IM adjust washer, for example, replace the CAB F B-Assy
(Service).
Note 2: IM調整ワッシャ (A, B, C)は，それぞれ厚さが異なります。
取り外したIM調整ワッシャは，必ず元の位置に戻してくださ
い。
い。
また，IM調整ワッシャを交換する際は，2-10ページの 2-2.
SELECTION PARTS を参照してください。
IM adjust washerを紛失するなどして元の状態に戻せなく
なった場合は，CAB F B-Assy (Service) を交換してください。
なった場合は，CAB F B-Assy (Service) を交換してください。
Note 3: Refer to “Assembly-2: IM Adjust Washer (A, B, C) putting
position” when you assemble.
Note 3: 組立時は Assembly-2: IM Adjust Washer (A, B, C) putting
position を参照してください。
Note 4: Refer to “Assembly-4: Method of attachment of the MB
Mask Sheet (754)” when you assemble.
Note 4: 組立時は Assembly-4: Method of attachment of the MB
Mask Sheet (754) を参照してください。
Note 5: Precautions for Replacement of the CAB F B-Assy
(Service).
As CAB F B-Assy (Service) may be damaged by static
electricity from its structure, handle it carefully like for the
MOS IC.
electricity from its structure, handle it carefully like for the
MOS IC.
In addition, ensure that the receiver is not covered with
dusts nor exposed to strong light.
dusts nor exposed to strong light.
Note 5: CAB F B-Assy (Service) サービス交換時の注意
CAB F B-Assy (Service) サービスは構造上，静電気により
破壊される恐れがあるため，MOS ICと同様に注意して取り
扱ってください。
破壊される恐れがあるため，MOS ICと同様に注意して取り
扱ってください。
また，受光部にはゴミの付着，および強い光がはいることの
ないように注意してください。
ないように注意してください。
5.0
1.7
#267:
M1.7 X 5.0
(Red)
4-287-436-21
4-287-436-21
NEX-F3D/F3K/F3Y_L2
2-8
2-1-6. IMAGER UNIT SECTION
ns: not supplied
Screw
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
251
4-259-691-01
IM PLATE (755), GLASS RETAINER
252
A-1817-089-A IM IR GLASS ASSY (755) (Note)
253
4-259-692-01
IM PLATE (755), SPACE
254
4-277-280-01
IM RUBBER (754), SEAL
#191 4-188-735-01 SCREW
(M1.7)
#191: M1.7 X 3.5 (Tapping)
(Black)
4-188-735-01
(Black)
4-188-735-01
3.5
1.7
#191
#191
251
252
(Note)
ns
253
254
(All mounted parts and IS-101 complete board are not supplied,
but they are included in CAB F B-Assy (Service))
but they are included in CAB F B-Assy (Service))
Note
Note:
(1)
Refer to the following when assembling the IM IR Glass
Assy (755) and the Imager.
Assy (755) and the Imager.
Attach the IM IR Glass Assy (755), Space IM Plate (755),
Glass Retainer IM Plate (755), and Seal IM Rubber (754)
to the Imager IM Plate (755).
Glass Retainer IM Plate (755), and Seal IM Rubber (754)
to the Imager IM Plate (755).
(2) Set the parts assembled in step (1) and the Imager onto
the optical filter block attachment jig (J-6082-737-A) while
aligning them with two pins.
aligning them with two pins.
(3) Secure the Imager with four screws.
Optical filter block attachment jig
J-6082-737-A
Parts assembled
in step (1)
in step (1)
Imager
Pin
Pin
Glass Retainer IM Plate (755)
Seal IM Rubber (754)
Imager IM Plate (755)
Space IM Plate (755)
IM IR Glass Assy (755)
Note:
IM IR ガラスASSYとイメージャを組み立てる際は、
下記を参照してください。
下記を参照してください。
(1) IM イメージャ台板(755)に、IM IR ガラスASSY (755)、
IM 間隔板(755)、IM IR ガラスASSY(755)、
IMシールラバー (754)を取り付ける。
IMシールラバー (754)を取り付ける。
(2) ピン2箇所で位置を合わせて、(1)で取り付けた部品とイメージャ
を、光学フィルタブロック貼り付け治具(J-6082-737-A)にセット
する。
する。
(3) ねじ4本でイメージャを固定する。
光学フィルタブロック貼り付け治具
J-6082-737-A
J-6082-737-A
(1)で取り付けた部品
イメージャ
ピン
ピン
IM ガラス押さえ板 (755)
IM IR ガラスASSY (755)
IM 間隔板 (755)
IM シールラバー (754)
IM イメージャ台板 (755)
NEX-F3D/F3K/F3Y_L2
2-9
2-1-7. CABINET FRONT SECTION
ns: not supplied
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
301
4-188-536-01
CAP, BODY (Note 2)
302
4-283-999-03
MB N PLATE A (754) (Note 3)
303
4-284-623-01
MB N PLATE (B) 755
* 304
4-185-963-01
MB N PLATE SP
305
4-189-512-01
RING (210), ORNAMENTAL
* 306
4-186-534-01
BUTTON, L LOCK (BLACK)
* 306
4-186-534-11
BUTTON, L LOCK (SILVER)
* 306
4-186-534-31
BUTTON, L LOCK (WHITE)
* 306
4-186-534-51
BUTTON, L LOCK (PINK)
307
X-2581-299-1 PIN ASSY (410), L LOCK
* 308
4-186-538-01
SPRING, LENS LOCK
309
X-2584-303-1 CABINET (FRONT) ASSY (720SL) (SILVER)
309
X-2584-304-1 CABINET (FRONT) ASSY (720PI) (PINK)
309
X-2584-305-1 CABINET (FRONT) ASSY (720WH) (WHITE)
309
X-2584-397-1 CABINET (FRONT) ASSY (720BK) (BLACK)
310
4-292-131-01
SPRING, BT LOCK
311
4-292-129-01
CLAW, BT LOCK
312
4-427-392-01
BASE (720), BT LOCK (BLACK, PINK)
312
4-427-392-11
BASE (720), BT LOCK (WHITE, SILVER)
313
4-292-130-01
SHAFT, BT LOCK CLAW
314
A-1876-371-A MB CONTACT UNIT (755), N (Note 1)
319
4-434-665-01
GASKET (SY (720))
#3
2-660-401-01
SCREW (M1.7), NEW TRU-STAR, P2
#64
2-666-551-21 SCREW,
TAPPING,
P2
#230
4-287-434-01
TAPPING (1.7 (ECOLOGY))
#268 4-427-394-01 SCREW,
TAPPING1.7
(D4X0.5)
Screw
#3: M1.7 X 2.5
(Red)
2-660-401-01
2-660-401-01
2.5
1.7
#64: M1.7 X 5.0 (Tapping)
(Silver)
2-666-551-21
2-666-551-21
5.0
1.7
#230:
4.0
1.7
M1.7 X 4.0 (Tapping)
(Black)
4-287-434-01
(Black)
4-287-434-01
#230
#230
ns
ns
ns
ns
#3
#3
#3
#3
#64
302
306
307
308
309
310
311
319
312
313
314
303
304
305
301
(Note 2)
#268
(Note 3)
(Note 1)
Note
Note 1:
Hold the N MB Contact Unit at
the center of both sides.
the center of both sides.
Hold here.
Don't touch this part.
Note 1:
N MB Contact Unitの両側の
中央部を持ってください。
中央部を持ってください。
ここを持ってください。
この部分に触れないでください。
Note 2: The CABINET (FRONT) BLOCK ASSY (SERVICE) in-
cludes a protective BODY CAP.
This part is supplied only with the CABINET (FRONT)
BLOCK ASSY (SERVICE).
BLOCK ASSY (SERVICE).
Note 2: サービス用キャビフロント組立には保護用のボディキャッ
プが含まれます。
この部品はサービス用キャビフロント組立のみに付属されま
す。
す。
Note 3: Refer to “Assembly-3: Screw tightening sequence when
assembling the MB N Plate A (754).”
Note 3: Assembly-3: Screw tightening sequence when assembling
the MB N Plate A (754). を参照してください。
#268:
4.0
1.7
M1.7 X 4.0 (Tapping)
(Silver)
4-427-394-01
(Silver)
4-427-394-01
NEX-F3D/F3K/F3Y_L2
2-10E
ACCESSORIES
901
902
903
904
905
906
907 (Note 1)
908
909 (Note 2)
Ref. No. Part No.
Description
901
1-489-282-11
AC adaptor AC-UB10/UB10B (J)
901
1-489-282-21
AC adaptor AC-UB10/UB10B (US, CND)
901
1-489-282-31
AC adaptor AC-UB10/UB10B (CH)
901
1-489-282-42
AC adaptor AC-UB10/UB10B (JE)
901
1-489-282-61
AC adaptor AC-UB10/UB10B (AEP, E, TW, KR, AUS)
902
1-569-007-12
Conversion (2P) adaptor (JE)
903
1-569-008-33
Conversion (2P) adaptor (E)
904
1-837-422-11
Power cord (mains lead) (JE)
904
1-837-424-11
Power cord (mains lead) (TW)
904
1-837-427-11
Power cord (mains lead) (AEP, E)
904
1-837-428-11
Power cord (mains lead) (KR)
904
1-837-429-11
Power cord (mains lead) (AUS)
905
1-839-666-11
Micro USB cable
906
4-188-538-01 Shoulder
strap
907
4-426-560-11
Instruction Manual (ENGLISH)
* 907
4-426-560-21
Instruction Manual (FRENCH, ITALIAN) (Note 1)
* 907
4-426-560-31
Instruction Manual (SPANISH, PORTUGUESE) (Note 1)
* 907
4-426-560-41
Instruction Manual (ENGLISH, FRENCH, GERMAN,
SPANISH, ITALIAN, PORTUGUESE, DUTCH, POLISH,
SWEDISH, FINNISH, NORWEGIAN, DANISH) (Note 1)
* 907
4-426-560-51
Instruction Manual (TRADITIONAL CHINESE,
SIMPLIFIED CHINESE) (Note 1)
* 907
4-426-560-61
Instruction Manual (RUSSIAN, UKRAINIAN) (Note 1)
* 907
4-426-560-71
Instruction Manual (ARABIC, PERSIAN) (Note 1)
907
4-426-560-81
Instruction Manual (KOREAN) (Note 1)
907
4-426-560-91
Instruction Manual (SIMPLIFIED CHINESE) (Note 1)
* 907
4-426-563-01
Instruction Manual (JAPANESE) (Note 1)
908
4-426-558-01
CD-ROM “Application Software for α camera” “α
Handbook”
* 909
4-423-275-01 α Handbook (JAPANESE) (Note 2)
* 909
4-423-275-11 α Handbook (ENGLISH) (Note 2)
* 909
4-423-275-21 α Handbook (FRENCH) (Note 2)
* 909
4-423-275-31 α Handbook (ITALIAN) (Note 2)
* 909
4-423-275-41 α Handbook (SPANISH) (Note 2)
Ref. No. Part No.
Description
* 909
4-423-275-51 α Handbook (PORTUGUESE) (Note 2)
* 909
4-423-275-61 α Handbook (GERMAN) (Note 2)
* 909
4-423-275-71 α Handbook (DUTCH) (Note 2)
* 909
4-423-275-81 α Handbook (TRADITIONAL CHINESE) (Note 2)
* 909
4-423-275-91 α Handbook (SIMPLIFIED CHINESE) (Note 2)
* 909
4-423-276-11 α Handbook (RUSSIAN) (Note 2)
* 909
4-423-276-21 α Handbook (ARABIC) (Note 2)
* 909
4-423-276-31 α Handbook (PERSIAN) (Note 2)
* 909
4-423-276-41 α Handbook (KOREAN) (Note 2)
* 909
4-423-276-51 α Handbook (POLISH) (Note 2)
* 909
4-423-276-61 α Handbook (CZECH) (Note 2)
* 909
4-423-276-71 α Handbook (HUNGARIAN) (Note 2)
* 909
4-423-276-81 α Handbook (SLOVAK) (Note 2)
* 909
4-423-276-91 α Handbook (SWEDISH) (Note 2)
* 909
4-423-277-11 α Handbook (FINNISH) (Note 2)
* 909
4-423-277-21 α Handbook (NORWEGIAN) (Note 2)
* 909
4-423-277-31 α Handbook (DANISH) (Note 2)
* 909
4-423-277-41 α Handbook (THAI) (Note 2)
* 909
4-423-277-51 α Handbook (UKRAINIAN) (Note 2)
(Note 1)
(Only for destination Japanese model)
日本語，英語，韓国語，中国語のみ部品供給可能です。
日本語，英語，韓国語，中国語のみ部品供給可能です。
(Note 2)
The CD-ROM supplied contains all of language version of the α
Handbook (PDF) for printing.
Handbook (PDF) for printing.
・ The printed handbook is not supplied. If required, please order it
with the part number above.
・ (Only for destination Japanese model)
日本国内については日本語のみが印刷での部品供給可能です。
This item is supplied with the unit as an accessory, but is not prepared as a service part.
951
Ref. No. Part No.
Description
951 (Not supplied) Rechargeable battery pack (NP-FW50)
2-2. SELECTION PARTS
Ref. No.202
Select the optimum thickness of washer.
Part No.
Description
4-185-999-01 IM WASHER (C), ADJUST (t = 0.05)
4-185-999-11 IM WASHER (C), ADJUST (t = 0.1)
4-185-999-21 IM WASHER (C), ADJUST (t = 0.15)
4-185-999-31 IM WASHER (C), ADJUST (t = 0.2)
4-185-999-41 IM WASHER (C), ADJUST (t = 0.25)
4-185-999-51 IM WASHER (C), ADJUST (t = 0.3)
4-185-999-61 IM WASHER (C), ADJUST (t = 0.35)
4-185-999-71 IM WASHER (C), ADJUST (t = 0.4)
4-185-999-81 IM WASHER (C), ADJUST (t = 0.45)
4-185-999-91 IM WASHER (C), ADJUST (t = 0.495)
4-185-999-11 IM WASHER (C), ADJUST (t = 0.1)
4-185-999-21 IM WASHER (C), ADJUST (t = 0.15)
4-185-999-31 IM WASHER (C), ADJUST (t = 0.2)
4-185-999-41 IM WASHER (C), ADJUST (t = 0.25)
4-185-999-51 IM WASHER (C), ADJUST (t = 0.3)
4-185-999-61 IM WASHER (C), ADJUST (t = 0.35)
4-185-999-71 IM WASHER (C), ADJUST (t = 0.4)
4-185-999-81 IM WASHER (C), ADJUST (t = 0.45)
4-185-999-91 IM WASHER (C), ADJUST (t = 0.495)
Ref. No.203
Select the optimum thickness of washer.
Part No.
Description
4-185-998-01 IM WASHER (B), ADJUST (t = 0.05)
4-185-998-11 IM WASHER (B), ADJUST (t = 0.1)
4-185-998-21 IM WASHER (B), ADJUST (t = 0.15)
4-185-998-31 IM WASHER (B), ADJUST (t = 0.2)
4-185-998-41 IM WASHER (B), ADJUST (t = 0.25)
4-185-998-51 IM WASHER (B), ADJUST (t = 0.3)
4-185-998-61 IM WASHER (B), ADJUST (t = 0.35)
4-185-998-71 IM WASHER (B), ADJUST (t = 0.4)
4-185-998-81 IM WASHER (B), ADJUST (t = 0.45)
4-185-998-91 IM WASHER (B), ADJUST (t = 0.495)
4-185-998-11 IM WASHER (B), ADJUST (t = 0.1)
4-185-998-21 IM WASHER (B), ADJUST (t = 0.15)
4-185-998-31 IM WASHER (B), ADJUST (t = 0.2)
4-185-998-41 IM WASHER (B), ADJUST (t = 0.25)
4-185-998-51 IM WASHER (B), ADJUST (t = 0.3)
4-185-998-61 IM WASHER (B), ADJUST (t = 0.35)
4-185-998-71 IM WASHER (B), ADJUST (t = 0.4)
4-185-998-81 IM WASHER (B), ADJUST (t = 0.45)
4-185-998-91 IM WASHER (B), ADJUST (t = 0.495)
Ref. No.204
Select the optimum thickness of washer.
Part No.
Description
4-185-995-01 IM WASHER (A), ADJUST (t = 0.05)
4-185-995-11 IM WASHER (A), ADJUST (t = 0.1)
4-185-995-21 IM WASHER (A), ADJUST (t = 0.15)
4-185-995-31 IM WASHER (A), ADJUST (t = 0.2)
4-185-995-41 IM WASHER (A), ADJUST (t = 0.25)
4-185-995-51 IM WASHER (A), ADJUST (t = 0.3)
4-185-995-61 IM WASHER (A), ADJUST (t = 0.35)
4-185-995-71 IM WASHER (A), ADJUST (t = 0.4)
4-185-995-81 IM WASHER (A), ADJUST (t = 0.45)
4-185-995-91 IM WASHER (A), ADJUST (t = 0.495)
4-185-995-11 IM WASHER (A), ADJUST (t = 0.1)
4-185-995-21 IM WASHER (A), ADJUST (t = 0.15)
4-185-995-31 IM WASHER (A), ADJUST (t = 0.2)
4-185-995-41 IM WASHER (A), ADJUST (t = 0.25)
4-185-995-51 IM WASHER (A), ADJUST (t = 0.3)
4-185-995-61 IM WASHER (A), ADJUST (t = 0.35)
4-185-995-71 IM WASHER (A), ADJUST (t = 0.4)
4-185-995-81 IM WASHER (A), ADJUST (t = 0.45)
4-185-995-91 IM WASHER (A), ADJUST (t = 0.495)
Click on the first or last page to see other NEX-F3D / NEX-F3K / NEX-F3Y service manuals if exist.