Sony NEX-7 / NEX-7K (serv.man2) Service Manual ▷ View online
NEX-7/7K_L2
2-9
2-1-7. IMAGER BLOCK SECTION
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
301
4-281-196-01
SHEET, MASK SHEET ADHESIVE (Note 4)
302
4-277-282-11
MB SHEET (754), MASK (Note 4)
303
1-487-619-21
SHUTTER UNIT (H094)
304
A-1817-096-B MB CHARGE UNIT (755)
305
4-288-878-01
SHEET, CUSHION (SH)
* 306
Selection Parts IM WASHER (A), ADJUST (Note 2, 3)
* 307
Selection Parts IM WASHER (B), ADJUST (Note 2, 3)
* 308
Selection Parts IM WASHER (C), ADJUST (Note 2, 3)
309
4-292-165-01
SHEET, IMAGER ELECTRIC HEAT
310
4-300-303-01
PLATE (IM) (600), RADIATION
311
A-1857-129-A (FRONT) BLOCK ASSY (SERVICE)
(including CP6001 (CMOS imager) and IS-095 complete
board) (Note 5)
board) (Note 5)
#177
3-208-537-21
0+Z M1.4X2 NEW TORASUTA
#197
4-185-990-01
MB SCREW, CHARGE UNIT FIXED
#238
4-287-436-01
SCREW (M1.7) (Note 1)
#197
#177
#238
(Note 1)
(Note 1)
2
Imager Unit Section
(See page 2-10)
3
303
4
304
301
(Note 4)
302
(Note 4)
1
310
306
(Note 2, 3)
307
(Note 2, 3)
309
308
(Note 2, 3)
305
Cabinet (Front) Section
(See page 2-11)
311
(including CP6001 (CMOS imager)
and IS-095 complete board)
(Note 5)
and IS-095 complete board)
(Note 5)
DISASSEMBLY
1. Remove in numerical order (
1
to
4
) in the left figure.
Screw
#177: M1.4 X 2.5
(Red)
3-208-537-21
3-208-537-21
2.5
1.4
#197: M1.6 X 4.5 (Tapping)
(Silver)
4-185-990-01
4-185-990-01
4.5
1.6
3
#177 X 3
1
#238 X 3
Back View
#238
#177
Back View
#238:
M1.7 X 3.5
(Black)
4-287-436-01
(Black)
4-287-436-01
3.5
1.7
Note 1: Refer to “Assembly-1: Screw tightening sequence when
assembling the Heat Sink (IM).”.
Note 1: Assembly-1: Screw tightening sequence when assembling
the Heat Sink (IM). を参照してください。
Note
Note 2: The IM adjust washers (A, B, C) differ in thickness.
Make sure to return the removed IM adjust washers to origi-
nal places.
nal places.
When replacing IM adjust washers, refer to “2-2. SELEC-
TION PARTS” on page 2-12.
TION PARTS” on page 2-12.
If the original state cannot be restored due to loss of the IM
adjust washer, for example, replace the Mount Block Assy
(Service).
adjust washer, for example, replace the Mount Block Assy
(Service).
Note 2: IM調整ワッシャ (A, B, C)は,それぞれ厚さが異なります。
取り外したIM調整ワッシャは,必ず元の位置に戻してくださ
い。
い。
また,IM調整ワッシャを交換する際は,2-12ページの 2-2.
SELECTION PARTS を参照してください。
IM adjust washerを紛失するなどして元の状態に戻せなく
なった場合は,Mount Block Assy (Service) を交換してくだ
さい。
なった場合は,Mount Block Assy (Service) を交換してくだ
さい。
Note 3: Refer to “Assembly-2: IM Adjust Washer (A, B, C) putting
position” when you assemble.
Note 3: 組立時は Assembly-2: IM Adjust Washer (A, B, C) putting
position を参照してください。
Note 4: Refer to “Assembly-4: Method of attachment of the MB
Mask Sheet (754)” when you assemble.
Note 4: 組立時は Assembly-4: Method of attachment of the MB
Mask Sheet (754) を参照してください。
Note 5: Precautions for Replacement of the Mount Block Assy
Service
As Mount Block Assy Service may be damaged by static
electricity from its structure, handle it carefully like for the
MOS IC.
electricity from its structure, handle it carefully like for the
MOS IC.
In addition, ensure that the receiver is not covered with
dusts nor exposed to strong light.
dusts nor exposed to strong light.
Note 5: マウントブロックAssy サービス交換時の注意
マウントブロックAssy サービスは構造上,静電気により破壊
される恐れがあるため,MOS ICと同様に注意して取り扱って
される恐れがあるため,MOS ICと同様に注意して取り扱って
ください。
また,受光部にはゴミの付着,および強い光がはいることの
ないように注意してください。
ないように注意してください。
The changed portions from
Ver. 1.3 are shown in blue.
Ver. 1.3 are shown in blue.
Ver. 1.4 2012.07
NEX-7/7K_L2
2-10
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
351
4-259-691-01
IM PLATE (755), GLASS RETAINER
352
A-1817-089-A IM IR GLASS ASSY (755) (Note)
353
4-299-579-01
IM PLATE (756), SPACE
354
4-299-578-01
IM PLATE (756), IMAGER
#191 4-188-735-01 SCREW
(M1.7)
2-1-8. IMAGER UNIT SECTION
ns: not supplied
#191
ns
#191
351
352
(Note)
353
354
(All mounted parts and IS-095 complete board are not supplied,
but they are included in Cabinet (Front) Block Assy)
but they are included in Cabinet (Front) Block Assy)
Screw
#191: M1.7 X 3.5 (Tapping)
(Black)
4-188-735-01
4-188-735-01
3.5
1.7
Note
Note:
(1)
Refer to the following when assembling the Optical Filter
Block and the Imager.
Block and the Imager.
Attach the IM IR Glass Assy (755), Space IM Plate (756),
Glass Retainer IM Plate (755), and Seal IM Rubber (756)
to the Imager IM Plate (756).
Glass Retainer IM Plate (755), and Seal IM Rubber (756)
to the Imager IM Plate (756).
(2) Set the parts assembled in step (1) and the Imager onto
the optical filter block attachment jig (J-6082-737-A) while
aligning them with two pins.
aligning them with two pins.
(3) Secure the Imager with four screws.
Optical filter block attachment jig
J-6082-737-A
Parts assembled
in step (1)
in step (1)
Imager
Pin
Pin
Glass Retainer IM Plate (755)
Seal IM Rubber (756)
Imager IM Plate (756)
Space IM Plate (756)
IM IR Glass Assy (755)
Note:
IM IR ガラスASSYとイメージャを組み立てる際は、
下記を参照してください。
下記を参照してください。
(1) IM イメージャ台板(756)に、IM IR ガラスASSY (755)、
IM 間隔板(756)、IM ガラス押さえ板 (755)、
IMシールラバー (756)を取り付ける。
IMシールラバー (756)を取り付ける。
(2) ピン2箇所で位置を合わせて、(1)で取り付けた部品とイメージャ
を、光学フィルタブロック貼り付け治具(J-6082-737-A)にセット
する。
する。
(3) ねじ4本でイメージャを固定する。
光学フィルタブロック貼り付け治具
J-6082-737-A
J-6082-737-A
(1)で取り付けた部品
イメージャ
ピン
ピン
IM ガラス押さえ板 (755)
IM IR ガラスASSY (755)
IM 間隔板 (756)
IM シールラバー (756)
IM イメージャ台板 (756)
NEX-7/7K_L2
2-11
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
401
4-188-536-01
CAP, BODY (Note 2)
402
4-283-999-02
MB N PLATE A (754) (Note 3)
403
4-284-623-01
MB N PLATE (B) 755
* 404
4-185-963-01
MB N PLATE SP (Note 4)
* 405
4-186-539-01 RING, ORNAMENTAL
406
A-1773-802-A MB CONTACT UNIT, N (Note 1)
* 407
4-186-534-01
BUTTON, L LOCK
408
X-2581-299-1 PIN ASSY (410), L LOCK
* 409
4-186-538-01
SPRING, LENS LOCK
* 410
4-186-536-01
HOLDER, L LOCK
411
4-300-363-01
CABINET (FRONT) (600)
#76
2-666-551-11 SCREW,
TAPPING,
P2
#198
4-186-545-01
SCREW, 0+Z M1.7 SG (SPIN)
#232
4-287-437-01
SPECIAL (M1.7X2.5 (D4X0.5))
2-1-9. CABINET (FRONT) SECTION
#76
#232
#198
403
402
(Note 3)
401
(Note 2)
404
(Note 4)
405
406
(Note 1)
411
407
408
409
410
Screw
#76: M1.7 X 4.0 (Tapping)
(Silver)
2-666-551-11
2-666-551-11
4.0
1.7
Note
4.0
1.7
#198: M1.7 X 4.0
(Silver)
4-186-545-01
4-186-545-01
#232:
M1.7 X 2.5
(Silver)
4-287-437-01
(Silver)
4-287-437-01
2.5
1.7
Note 1:
Hold the N MB Contact Unit at
the center of both sides.
the center of both sides.
Hold here.
Don't touch this part.
Note 1:
N MB Contact Unitの両側の
中央部を持ってください。
中央部を持ってください。
ここを持ってください。
この部分に触れないでください。
Note 2: The CABINET (FRONT) BLOCK ASSY (SRVICE) inncludes
a protective BODY CAP.
This part is supplied only with the CABINET (FRONT)
BLOCK ASSY (SRVICE).
BLOCK ASSY (SRVICE).
Note 2: サービス用キャビフロント組立には保護用のボディキャッ
プが含まれます。
この部品はサービス用キャビフロント組立のみに付属されま
す。
す。
Note 3: Refer to “Assembly-3: Screw tightening sequence when
assembling the MB N Plate A (754).”
Note 3: Assembly-3: Screw tightening sequence when assembling
the MB N Plate A (754). を参照してください。
Note 4: Refer to “Assembly-5: Apply grease on the MB N Plate SP.”
Note 4: Assembly-5: Apply grease on the MB N Plate SP. を参照
してください。
NEX-7/7K_L2
2-12E
ACCESSORIES
901
902
903
904
905
906
907
908
909
910
911
912 (Note 1)
913 (Note 1)
914
915
Ref. No.
Part No.
Description
901 1-487-907-11
Battery charger (BC-VW1) (J)
901 1-487-907-21
Battery charger (BC-VW1) (US, CND)
901 1-487-907-41
Battery charger (BC-VW1) (EXCEPT US, CND, J)
902 1-569-007-12
Conversion (2P) Adaptor (JE)
903 1-569-008-33
Conversion (2P) Adaptor (E (EXCEPT PAL))
904 1-832-121-51
Power cord (mains lead) (CH)
904 1-837-421-11
Power cord (mains lead) (UK, E (PAL))
904 1-837-422-11
Power cord (mains lead) (JE)
904 1-837-427-11
Power cord (mains lead) (AEP, E (EXCEPT PAL))
904 1-837-428-11
Power cord (mains lead) (KR)
904 1-837-429-11
Power cord (mains lead) (AUS)
905 1-837-287-21
USB
cable
906 4-410-953-01
Cleaning
Cloth
907 4-188-536-01
Body
cap
908 4-411-276-01
Shoulder
strap
909 4-295-853-01
Eyepiece
cup
910
4-400-730-01
Accessory shoe cap
911
4-159-703-02
Lens hood (NEX-7K)
912
4-299-175-01
Instruction Manual (Getting Started) (JAPANESE) (Note 1)
912
4-299-175-11
Instruction Manual (Getting Started) (ENGLISH) (Note 1)
* 912
4-299-175-21
Instruction Manual (Getting Started) (FRENCH, ITALIAN) (Note 1)
* 912
4-299-175-31
Instruction Manual (Getting Started) (SPANISH, PORTUGUESE)
(Note 1)
* 912
4-299-175-41
Instruction Manual (Getting Started) (GERMAN, DUTCH) (Note 1)
* 912
4-299-175-51
Instruction Manual (Getting Started) (TRADITIONAL CHINESE,
SIMPLIFIED CHINESE) (Note 1)
* 912
4-299-175-61
Instruction Manual (Getting Started) (RUSSIAN, UKRAINIAN) (Note 1)
* 912
4-299-175-71
Instruction Manual (Getting Started) (ARABIC, PERSIAN) (Note 1)
912
4-299-175-81
Instruction Manual (Getting Started) (KOREAN) (Note 1)
912
4-299-175-91
Instruction Manual (Getting Started) (SIMPLIFIED CHINESE) (Note 1)
* 912
4-299-176-11
Instruction Manual (Getting Started) (POLISH) (Note 1)
* 912
4-299-177-11
Instruction Manual (Getting Started) (HUNGARIAN) (Note 1)
* 912
4-299-177-21
Instruction Manual (Getting Started) (SLOVAK) (Note 1)
* 912
4-299-177-31
Instruction Manual (Getting Started) (CZECH) (Note 1)
* 912
4-299-177-41
Instruction Manual (Getting Started) (SWEDISH) (Note 1)
* 912
4-299-177-51
Instruction Manual (Getting Started) (FINNISH) (Note 1)
* 912
4-299-177-61
Instruction Manual (Getting Started) (NORWEGIAN) (Note 1)
* 912
4-299-177-71
Instruction Manual (Getting Started) (DANISH) (Note 1)
* 912
4-299-177-81
Instruction Manual (Getting Started) (THAI) (Note 1)
* 912
4-299-177-91
Instruction Manual (Getting Started) (INDONESIAN) (Note 1)
913
4-408-688-01
Instruction Manual (Operations) (JAPANESE) (Note 1)
913
4-408-688-11
Instruction Manual (Operations) (ENGLISH) (Note 1)
* 913
4-408-688-21
Instruction Manual (Operations) (FRENCH, ITALIAN) (Note 1)
* 913
4-408-688-31
Instruction Manual (Operations) (SPANISH, PORTUGUESE) (Note 1)
* 913
4-408-688-41
Instruction Manual (Operations) (GERMAN, DUTCH) (Note 1)
* 913
4-408-688-51
Instruction Manual (Operations) (TRADITIONAL CHINESE,
SIMPLIFIED CHINESE) (Note 1)
* 913
4-408-688-61
Instruction Manual (Operations) (RUSSIAN, UKRAINIAN) (Note 1)
* 913
4-408-688-71
Instruction Manual (Operations) (ARABIC, PERSIAN) (Note 1)
913
4-408-688-81
Instruction Manual (Operations) (KOREAN) (Note 1)
Ref. No.
Part No.
Description
913
4-408-688-91
Instruction Manual (Operations) (SIMPLIFIED CHINESE) (Note 1)
* 913
4-408-690-11
Instruction Manual (Operations) (POLISH) (Note 1)
* 913
4-408-691-11
Instruction Manual (Operations) (HUNGARIAN) (Note 1)
* 913
4-408-691-21
Instruction Manual (Operations) (SLOVAK) (Note 1)
* 913
4-408-691-31
Instruction Manual (Operations) (CZECH) (Note 1)
* 913
4-408-691-41
Instruction Manual (Operations) (SWEDISH) (Note 1)
* 913
4-408-691-51
Instruction Manual (Operations) (FINNISH) (Note 1)
* 913
4-408-691-61
Instruction Manual (Operations) (NORWEGIAN) (Note 1)
* 913
4-408-691-71
Instruction Manual (Operations) (DANISH) (Note 1)
* 913
4-408-691-81
Instruction Manual (Operations) (THAI) (Note 1)
* 913
4-408-691-91
Instruction Manual (Operations) (INDONESIAN) (Note 1)
914
4-299-180-01
CD-ROM “Application Software for α camera” “α Handbook”
* 915
4-297-558-01
α Handbook (JAPANESE) (Note 2)
* 915
4-297-558-11
α Handbook (ENGLISH) (Note 2)
* 915
4-297-558-21
α Handbook (FRENCH) (Note 2)
* 915
4-297-558-31
α Handbook (ITALIAN) (Note 2)
* 915
4-297-558-41
α Handbook (SPANISH) (Note 2)
* 915
4-297-558-51
α Handbook (PORTUGUESE) (Note 2)
* 915
4-297-558-61
α Handbook (GERMAN) (Note 2)
* 915
4-297-558-71
α Handbook (DUTCH) (Note 2)
* 915
4-297-558-81
α Handbook (TRADITIONAL CHINESE) (Note 2)
* 915
4-297-558-91
α Handbook (SIMPLIFIED CHINESE) (Note 2)
* 915
4-297-560-11
α Handbook (RUSSIAN) (Note 2)
* 915
4-297-560-21
α Handbook (ARABIC) (Note 2)
* 915
4-297-560-31
α Handbook (PERSIAN) (Note 2)
* 915
4-297-560-41
α Handbook (KOREAN) (Note 2)
* 915
4-297-560-51
α Handbook (POLISH) (Note 2)
* 915
4-297-560-61
α Handbook (CZECH) (Note 2)
* 915
4-297-560-71
α Handbook (HUNGARIAN) (Note 2)
* 915
4-297-560-81
α Handbook (SLOVAK) (Note 2)
* 915
4-297-560-91
α Handbook (SWEDISH) (Note 2)
* 915
4-297-562-11
α Handbook (FINNISH) (Note 2)
* 915
4-297-562-21
α Handbook (NORWEGIAN) (Note 2)
* 915
4-297-562-31
α Handbook (DANISH) (Note 2)
* 915
4-297-562-41
α Handbook (THAI) (Note 2)
* 915
4-297-562-51
α Handbook (UKRAINIAN) (Note 2)
(Note 1)
(Only for destination Japanese model)
日本語,英語,韓国語,中国語のみ部品供給可能です。
日本語,英語,韓国語,中国語のみ部品供給可能です。
(Note 2)
The CD-ROM supplied contains all of language version of the α
Handbook (PDF) for printing.
Handbook (PDF) for printing.
・ The printed handbook is not supplied. If required, please order it
with the part number above.
・ (Only for destination Japanese model)
日本国内については日本語のみが印刷での部品供給可能です。
This item is supplied with the unit as an accessory, but is not prepared as a service part.
951
Ref. No. Part No.
Description
951 (Not supplied) Rechargeable battery pack (NP-FW50)
2-2. SELECTION PARTS
Ref. No.306
Select the optimum thickness of washer.
Part No.
Description
*
4-185-995-01 IM WASHER (A), ADJUST (t = 0.05)
*
4-185-995-11 IM WASHER (A), ADJUST (t = 0.1)
*
4-185-995-21 IM WASHER (A), ADJUST (t = 0.15)
*
4-185-995-31 IM WASHER (A), ADJUST (t = 0.2)
*
4-185-995-41 IM WASHER (A), ADJUST (t = 0.25)
*
4-185-995-51 IM WASHER (A), ADJUST (t = 0.3)
*
4-185-995-61 IM WASHER (A), ADJUST (t = 0.35)
*
4-185-995-71 IM WASHER (A), ADJUST (t = 0.4)
*
4-185-995-81 IM WASHER (A), ADJUST (t = 0.45)
*
4-185-995-91 IM WASHER (A), ADJUST (t = 0.495)
Ref. No.307
Select the optimum thickness of washer.
Part No.
Description
*
4-185-998-01 IM WASHER (B), ADJUST (t = 0.05)
*
4-185-998-11 IM WASHER (B), ADJUST (t = 0.1)
*
4-185-998-21 IM WASHER (B), ADJUST (t = 0.15)
*
4-185-998-31 IM WASHER (B), ADJUST (t = 0.2)
*
4-185-998-41 IM WASHER (B), ADJUST (t = 0.25)
*
4-185-998-51 IM WASHER (B), ADJUST (t = 0.3)
*
4-185-998-61 IM WASHER (B), ADJUST (t = 0.35)
*
4-185-998-71 IM WASHER (B), ADJUST (t = 0.4)
*
4-185-998-81 IM WASHER (B), ADJUST (t = 0.45)
*
4-185-998-91 IM WASHER (B), ADJUST (t = 0.495)
Ref. No.308
Select the optimum thickness of washer.
Part No.
Description
*
4-185-999-01 IM WASHER (C), ADJUST (t = 0.05)
*
4-185-999-11 IM WASHER (C), ADJUST (t = 0.1)
*
4-185-999-21 IM WASHER (C), ADJUST (t = 0.15)
*
4-185-999-31 IM WASHER (C), ADJUST (t = 0.2)
*
4-185-999-41 IM WASHER (C), ADJUST (t = 0.25)
*
4-185-999-51 IM WASHER (C), ADJUST (t = 0.3)
*
4-185-999-61 IM WASHER (C), ADJUST (t = 0.35)
*
4-185-999-71 IM WASHER (C), ADJUST (t = 0.4)
*
4-185-999-81 IM WASHER (C), ADJUST (t = 0.45)
*
4-185-999-91 IM WASHER (C), ADJUST (t = 0.495)
The changed portions from
Ver. 1.2 are shown in blue.
Ver. 1.2 are shown in blue.
Ver. 1.3 2012.04
Click on the first or last page to see other NEX-7 / NEX-7K (serv.man2) service manuals if exist.