Sony DSLR-A500 / DSLR-A550 Service Manual ▷ View online
DSLR-A500/A550_L2
2-16E
Checking supplied accessories.
Note: This item is supplied with the unit as an accessory,
but is not prepared as a service part.
• Refer to page 2-1 for mark .
USB Cable
1-835-993-11
1-835-993-11
Body Cap
2-688-728-02
2-688-728-02
Body Cap Seal
2-894-387-01
2-894-387-01
Eyepiece Cover
3-273-458-01
Eyecup
X-2514-442-1
X-2514-442-1
CD-ROM
(Application Software for
(Application Software for
α Camera)
4-154-842-01
Shoulder Strap
4-145-436-01
4-145-436-01
Rechargeable Battery Pack
NP-FM500H
(Note)
NP-FM500H
(Note)
Battery Charger
BC-VM10
BC-VM10
1-479-742-41 (EXCEPT US, CND)
1-479-742-51 (US, CND)
Power Cord (Mains Lead)
1-790-107-42 (US, CND)
1-832-121-31 (CH)
1-832-169-41 (UK, HK)
1-833-892-41 (KR)
1-834-482-21 (AEP, E)
1-835-983-11 (AUS)
1-836-251-11 (J)
Instruction Manual
4-149-235-01 (JAPANESE)
∗ 4-149-235-11 (ENGLISH)
∗ 4-149-235-21 (FRENCH, ITALIAN)
∗ 4-149-235-31 (SPANISH, PORTUGUESE)
∗ 4-149-235-41 (GERMAN, DUTCH)
∗ 4-149-235-51 (TRADITIONAL CHINESE, SIMPLIFIED CHINESE) (E, HK)
∗ 4-149-235-61 (RUSSIAN)
∗ 4-149-235-71 (ARABIC, PERSIAN)
∗ 4-149-235-81 (KOREAN)
∗ 4-149-235-91 (SIMPLIFIED CHINESE) (CH)
∗ 4-158-939-11 (POLISH)
Conversion (2P) Adaptor
0 1-569-008-12
0 1-569-008-12
(E (Southeast Asia))
DSLR-A500/A550_L2
3-1
3. ASSEMBLY
3-1. IDENTIFYING PARTS
3-2. ASSEMBLY
#23: M1.7 X 4.0 (Tapping)
(Black)
3-080-204-11
(Black)
3-080-204-11
4.0
1.7
Assembly-1: Mirror Box Sub Unit
1-1. Sub Mirror Function Spring
1-3. Shutter Cam Gear Assy, Idle Gear, Mirror Charge Cam Gear
1-4. Charge Base Plate A Unit, Deceleration Gear 2, Deceleration Gear 3, Idle Gear 2
Hole
Hole
Hole
- Gears Position -
Hole
Hole
1
Shutter Cam Gear Assy
1
Charge Base Plate A Unit
Charge Base Plate A Unit
2
Screw
Screw (#23)
3
Deceleration Gear 2
Deceleration Gear 2
4
Deceleration Gear 3
Deceleration Gear 3
5
Idle Gear 2
Idle Gear 2
Shutter Cam Gear Assy
Mirror Box Rib
Mark
2
Idle Gear
Idle Gear
3
Mirror Charge Cam Gear
Mirror Charge Cam Gear
1-2. Mirror Charge Lever Assy
Mirror Charge Lever Assy
Main Mirror Holder Boss
Main Mirror Holder Down
Spring
Sub Mirror Function Spring
∗ Note the direction.
- Left View -
- Right View -
- Right View -
- Right View -
View Position
Top View
Left View
Right View
Bottom View
Front View
Back View
1
Mirror Box Section
(Sub
Unit)
Assembly-1
Assembly-7
qf
Rear Cover Section
qa
Top Cover Section
Assembly-8
Assembly-9
Assembly-10
4
Battery Holder Section
Assembly-3
2
Mirror Box Section (Penta Unit)
7
Anti Shake Unit Section
Assembly-5
9
AM-019 Board
qs
Eye Piece Assy
8
Main Frame
qd
Front Cover
6
Shutter Unit
Assembly-6
5
RT Holder
Assembly-4
0
Bottom Frame
3
ALX-8520
(AF
Module)
Assembly-2
qg
Side Cover L
DSLR-A500/A550_L2
3-2
#93: M1.7 X 3.5 (Tapping)
(Silver)
3-254-082-01
(Silver)
3-254-082-01
3.5
1.7
#93: M1.7 X 3.5 (Tapping)
(Silver)
3-254-082-01
(Silver)
3-254-082-01
3.5
1.7
#23: M1.7 X 4.0 (Tapping)
(Black)
3-080-204-11
(Black)
3-080-204-11
4.0
1.7
#23: M1.7 X 4.0 (Tapping)
(Black)
3-080-204-11
(Black)
3-080-204-11
4.0
1.7
3.9
2.0
#164: M2.0 X 3.9
(Black)
3-268-954-11
(Black)
3-268-954-11
#64: M1.7 X 5.0 (Tapping)
(Silver)
2-666-551-21
(Silver)
2-666-551-21
5.0
1.7
1-5. Charge Base Plate B Assy
Charge Base Plate B Assy
1-6. Mirror Driving Spring
1-8. Shutter Charge Lever Spring
1-7. Mirror Driving (SP) Retainer
1-9. Adjustment Plate Retainer
1-12. A Mount Lug Plate (Lower)
A Mount Lug Plate (Lower)
Adjustment Plate Retainer
Mirror Driving (SP) Retainer
Boss
Hole
Screw
1-10. BL Contact Holder Unit, BL Dust Protect Sheet
1-13. Iris Joint Gear, Aperture Unit
∗ The Aperture Unit is supplied by being set in the charge position
(initial position), but if this position is disordered when the Aperture
Unit is removed, or if the charge position is to be set again, perform
as follows.
∗ Refer to "1-14. Aperture Unit Charge Position Setting" for the confirm
method at the charge position.
∗ The Aperture Unit is supplied by being set in the charge position
(initial position), but if this position is disordered when the Aperture
Unit is removed, or if the charge position is to be set again, perform
as follows.
∗ Refer to "1-14. Aperture Unit Charge Position Setting" for the confirm
method at the charge position.
1-15. Aperture Unit Free Position Setting
∗ Set the Aperture Unit to a free position once, if the gear was rotated
accidentally and the charge position is disordered, or if the charge
position was shifted during disassembly.
∗ Set the Aperture Unit to a free position once, if the gear was rotated
accidentally and the charge position is disordered, or if the charge
position was shifted during disassembly.
1-14. Aperture Unit Charge Position Setting
1. Check that the Aperture Unit is in a free state.
2. After confirming that the Aperture Unit is in a free state, rotate the
gear by 3 turns.
3. After rotating the gear by 3 turns, set the Aperture Unit where the
holes in the gear and the Aperture Unit coincide. This position is the
charge
1. Check that the Aperture Unit is in a free state.
2. After confirming that the Aperture Unit is in a free state, rotate the
gear by 3 turns.
3. After rotating the gear by 3 turns, set the Aperture Unit where the
holes in the gear and the Aperture Unit coincide. This position is the
charge
position.
∗ Refer to "1-15. Aperture Unit Free Position Setting" for the setting
and the confirm method at the free position.
1-11. AF Driving Unit
AF Driving Unit
BL Dust Protect Sheet
Mirror Charge Lever Assy
- Right View -
- Front View -
- Back View -
- Right View -
- Right View -
- Right View -
- Right View -
Mirror Driving Spring
Screw
Shutter Charge Lever Spring
∗ Note the direction.
Screw
Boss
Boss
Claw
Boss
Screw
- Front View -
Screw
1 Iris Joint Gear
3 Screw
2 Aperture Unit
- Front View -
AF Driving Unit Flexible
Board Arrangement
Board Arrangement
Boss
Soldering
- Left View -
In a free state, the edge of this spring
will move up and down about 1 mm if
the gear is moved a little.
will move up and down about 1 mm if
the gear is moved a little.
Gear rotating
direction to make
the unit free
direction to make
the unit free
Gear rotating
direction to set
the charge position
direction to set
the charge position
In a free state, a hole in the gear almost
coincides with a hole in the Aperture Unit.
coincides with a hole in the Aperture Unit.
Note: The spring is deformed and cannot
be used if the gear is rotated too
much from a free state.
If the edge of spring is located downward,
rotate the gear in the arrow direction to
search a free position.
∗ In a free position, the edge of spring is
located upward.
rotate the gear in the arrow direction to
search a free position.
∗ In a free position, the edge of spring is
located upward.
First, check the
spring edge position.
spring edge position.
DSLR-A500/A550_L2
3-3
#166: M1.7 X 3.0 (Tapping)
(Silver)
3-271-395-11
(Silver)
3-271-395-11
3.0
1.7
#23: M1.7 X 4.0 (Tapping)
(Black)
3-080-204-11
(Black)
3-080-204-11
4.0
1.7
#23: M1.7 X 4.0 (Tapping)
(Black)
3-080-204-11
(Black)
3-080-204-11
4.0
1.7
5.5
2.0
#163: M2.0 X 5.5 (Tapping)
(Silver)
2-695-575-11
(Silver)
2-695-575-11
3.0
1.7
#165: M1.7 X 3.0 (Tapping)
(Silver)
2-695-434-31
(Silver)
2-695-434-31
2
3
5
1-16. A Mount Lug Plate (UR)
1-17. A Mount Lug Plate (UL)
1-20. Lens Lock Unit
1-18. AF Coupler, AF Coupler Tension Spring
AF Coupler
1-19. Coupler Lever
∗ Tighten six screws in order of the number.
1-21. Ring Roller (A), Iris Ring
1. With the Aperture Unit set in the charge position (see "1-14. Aperture
Unit Charge Position Setting" ), install it on the front frame set.
1. With the Aperture Unit set in the charge position (see "1-14. Aperture
Unit Charge Position Setting" ), install it on the front frame set.
∗ The Aperture Unit has been set in the charge position, if it is not
removed.
However, the iris ring must be in the removed state (where the iris
joint gear is not rotated).
2. Install the iris ring with it's a punch mark aligned with a line that
connects the iris joint gear shaft and the optical axis center.
However, the iris ring must be in the removed state (where the iris
joint gear is not rotated).
2. Install the iris ring with it's a punch mark aligned with a line that
connects the iris joint gear shaft and the optical axis center.
1-24. Ring (SP), Mount Spacer, H Mount
H Mount
Mount Spacer
Ring (SP)
1-22. Ring Roller (B), Ring Roller (C), Ring Roller (C) Shaft
1-23. Lens Lock Button, Lens Lock Pin, Lens Lock Spring
1-25. Coupler Joint Lever
Coupler Joint Lever
Lens Lock Button
Lens Lock Pin
Lens Lock Spring
Claw
Claw
Optical Axis Center
Ring Roller (A)
Ring Roller (A)
Iris Ring
Iris Joint Gear Shaft Punch Mark
Boss
Boss
AF Coupler Tension Spring
∗ Note the direction.
1
4
6
Soldering
Lens Lock Unit
Boss
Claw
Coupler Lever Shaft
Coupler Lever
Lever Adjustment Screw
Claw
Boss
Claw
Boss
Screw
Claw
- Top View -
Claw
Screw
- Back View -
- Front View -
- Front View -
- Right View -
Ring Roller (B)
Ring Roller (B)
Iris Ring
G G-85
Ring Roller (C)
Ring Roller (C)
Ring Roller (C)
Ring Roller (C) Shaft
Ring Roller (C) Shaft
Ring Roller (C) Shaft
Ring Roller (C) Shaft
Iris Ring
G G-85
Screw
Click on the first or last page to see other DSLR-A500 / DSLR-A550 service manuals if exist.