Sony DSLR-A230 / DSLR-A330 / DSLR-A380 Service Manual ▷ View online
DSLR-A230/A330/A380_L2
3-3
#93: M1.7 X 3.5 (Tapping)
(Silver)
3-254-082-01
3-254-082-01
3.5
1.7
#93: M1.7 X 3.5 (Tapping)
(Silver)
3-254-082-01
3-254-082-01
3.5
1.7
#23: M1.7 X 4.0 (Tapping)
(Black)
3-080-204-11
3-080-204-11
4.0
1.7
#23: M1.7 X 4.0 (Tapping)
(Black)
3-080-204-11
3-080-204-11
4.0
1.7
3.9
2.0
#164: M2.0 X 3.9
(Black)
3-268-954-11
3-268-954-11
#64: M1.7 X 5.0 (Tapping)
(Silver)
2-666-551-21
2-666-551-21
5.0
1.7
1-5. Charge Base Plate B Assy
Charge Base Plate B Assy
1-6. Mirror Driving Spring
1-8. Shutter Charge Lever Spring
1-7. Mirror Driving (SP) Retainer
1-9. Adjustment Plate Retainer
1-12. A Mount Lug Plate (Lower)
A Mount Lug Plate (Lower)
Adjustment Plate Retainer
Mirror Driving (SP) Retainer
Boss
Hole
Screw
1-10. BL Contact Holder Unit, BL Dust Protect Sheet
1-13. Iris Joint Gear, Aperture Unit
∗ The Aperture Unit is supplied by being set in the charge position
∗ The Aperture Unit is supplied by being set in the charge position
(initial position), but if this position is disordered when the Aperture
Unit is removed, or if the charge position is to be set again, perform
as follows.
Unit is removed, or if the charge position is to be set again, perform
as follows.
∗ Refer to "1-14. Aperture Unit Charge Position Setting" for the confirm
method at the charge position.
1-15. Aperture Unit Free Position Setting
∗ Set the Aperture Unit to a free position once, if the gear was rotated
∗ Set the Aperture Unit to a free position once, if the gear was rotated
accidentally and the charge position is disordered, or if the charge
position was shifted during disassembly.
position was shifted during disassembly.
1-14. Aperture Unit Charge Position Setting
1. Check that the Aperture Unit is in a free state.
2. After confirming that the Aperture Unit is in a free state, rotate the
1. Check that the Aperture Unit is in a free state.
2. After confirming that the Aperture Unit is in a free state, rotate the
gear by 3 turns.
3. After rotating the gear by 3 turns, set the Aperture Unit where the
holes in the gear and the Aperture Unit coincide. This position is the
charge position.
∗ Refer to "1-15. Aperture Unit Free Position Setting" for the setting
charge position.
∗ Refer to "1-15. Aperture Unit Free Position Setting" for the setting
and the confirm method at the free position.
1-11. AF Driving Unit
AF Driving Unit
BL Dust Protect Sheet
Mirror Charge Lever Assy
- Right View -
- Front View -
- Back View -
- Right View -
- Right View -
- Right View -
- Right View -
Mirror Driving Spring
Screw
Shutter Charge Lever Spring
∗ Note the direction.
Screw
Boss
Boss
Claw
Boss
Screw
- Front View -
Screw
1
Iris Joint Gear
3
Screw
2
Aperture Unit
- Front View -
AF Driving Unit Flexible
Board Arrangement
Board Arrangement
Boss
Soldering
- Left View -
In a free state, the edge of this spring
will move up and down about 1 mm if
the gear is moved a little.
will move up and down about 1 mm if
the gear is moved a little.
Gear rotating
direction to make
the unit free
direction to make
the unit free
Gear rotating
direction to set
the charge position
direction to set
the charge position
In a free state, a hole in the gear almost
coincides with a hole in the Aperture Unit.
coincides with a hole in the Aperture Unit.
Note: The spring is deformed and cannot
be used if the gear is rotated too
much from a free state.
much from a free state.
If the edge of spring is located downward,
rotate the gear in the arrow direction to
search a free position.
∗ In a free position, the edge of spring is
rotate the gear in the arrow direction to
search a free position.
∗ In a free position, the edge of spring is
located upward.
First, check the
spring edge position.
spring edge position.
DSLR-A230/A330/A380_L2
3-4
#166: M1.7 X 3.0 (Tapping)
(Silver)
3-271-395-11
3-271-395-11
3.0
1.7
#23: M1.7 X 4.0 (Tapping)
(Black)
3-080-204-11
3-080-204-11
4.0
1.7
#23: M1.7 X 4.0 (Tapping)
(Black)
3-080-204-11
3-080-204-11
4.0
1.7
5.5
2.0
#163: M2.0 X 5.5 (Tapping)
(Silver)
2-695-575-11
2-695-575-11
3.0
1.7
#165: M1.7 X 3.0 (Tapping)
(Silver)
2-695-434-31
2-695-434-31
2
3
5
1-16. A Mount Lug Plate (UR)
1-17. A Mount Lug Plate (UL)
1-20. Lens Lock Unit
1-18. AF Coupler, AF Coupler Tension Spring
AF Coupler
1-19. Coupler Lever
∗ Tighten six screws in order of the number.
1-21. Ring Roller (A), Iris Ring
1. With the Aperture Unit set in the charge position (see "1-14. Aperture
1. With the Aperture Unit set in the charge position (see "1-14. Aperture
Unit Charge Position Setting" ), install it on the front frame set.
∗ The Aperture Unit has been set in the charge position, if it is not
∗ The Aperture Unit has been set in the charge position, if it is not
removed.
However, the iris ring must be in the removed state (where the iris
joint gear is not rotated).
However, the iris ring must be in the removed state (where the iris
joint gear is not rotated).
2. Install the iris ring with it's a punch mark aligned with a line that
connects the iris joint gear shaft and the optical axis center.
1-24. Ring (SP), Mount Spacer, H Mount
H Mount
Mount Spacer
Ring (SP)
1-22. Ring Roller (B), Ring Roller (C), Ring Roller (C) Shaft
1-23. Lens Lock Button, Lens Lock Pin, Lens Lock Spring
1-25. Coupler Joint Lever
Coupler Joint Lever
Lens Lock Button
Lens Lock Pin
Lens Lock Spring
Claw
Claw
Optical Axis Center
Ring Roller (A)
Ring Roller (A)
Iris Ring
Iris Joint Gear Shaft Punch Mark
Boss
Boss
AF Coupler Tension Spring
∗ Note the direction.
1
4
6
Soldering
Lens Lock Unit
Boss
Claw
Coupler Lever Shaft
Coupler Lever
Lever Adjustment Screw
Claw
Boss
Claw
Boss
Screw
Claw
- Top View -
Claw
Screw
- Back View -
- Front View -
- Front View -
- Right View -
Ring Roller (B)
Ring Roller (B)
Iris Ring
G G-85
Ring Roller (C)
Ring Roller (C)
Ring Roller (C)
Ring Roller (C) Shaft
Ring Roller (C) Shaft
Ring Roller (C) Shaft
Ring Roller (C) Shaft
Iris Ring
G G-85
Screw
DSLR-A230/A330/A380_L2
3-5
Assembly-2: ALX-8520 (AF Module)
Assembly-4: Shutter Unit
Assembly-6: Strobo Base
Assembly-5: IS Flexible Unit
IS Flexible Unit
Shutter Unit
Assembly-3: Bottom Frame
Bottom Frame
ALX-8520 Flexible Board
Supply the power (2V, 1A) to the charge motor to rotate
it forward so as to move up the mirror completely.
it forward so as to move up the mirror completely.
Rib
Rib
Adhesive
Tape
Tape
Adhesive Tape
Adhesive Tape
Claw
Boss
Boss
- Bottom View -
- Bottom View -
- Back View -
ALX-8520 Flexible Board
AF Driving Unit Flexible Board
Charge Base Plate B Flexible Board
Mirror
DC Power Supply
(2V, 1A)
(2V, 1A)
6-1. ST Flexible Guard Sheet (B)
6-5. ST UL Guard Case
ST UL Guard Case
6-2. ST Flexible Guard Sheet (A)
6-6. Flash Unit
Rib
Rib
Black
Strobo Base Assy
White
Pink
6-3. Put the Crease
6-4. Adhesive tape
Adhesive tape
ST Flexible Guard Sheet (B)
ST Flexible Guard Sheet (A)
Valley fold
Valley fold
Pile up two lines.
Mountain fold
Conceal the chip.
Stick it to overflow.
Flash UNit
Attach it in order of number.
1
2
DSLR-A230/A330/A380_L2
3-6
#5: M1.7 X 3.5 (Tapping)
(Black)
3-080-204-01
3-080-204-01
3.5
1.7
#5: M1.7 X 3.5 (Tapping)
(Black)
3-080-204-01
3-080-204-01
3.5
1.7
#12: M1.7 X 5.0 (Tapping)
(Black)
3-080-204-21
3-080-204-21
1.7
5.0
#12: M1.7 X 5.0 (Tapping)
(Black)
3-080-204-21
3-080-204-21
1.7
5.0
A
Do not twist the ST harness on the route of figure below.
∗ It is assumed to be "Twist" that any of the harness coils around
∗ It is assumed to be "Twist" that any of the harness coils around
other harness once or more.
Do in the state of Pop-up when you install the ST Case U.
∗ To maintain the state of the harness as shown in figure below.
∗ To maintain the state of the harness as shown in figure below.
A
6-7. Harness Arrangement
6-10. Harness Arrangement
6-13. SH Flexible Spacer (A330/A380)
6-14. Plunger Solenoid
Plunger Solenoid
Soldering
SH Flexible Spacer
SH-032 Flexible Board
6-8. ST Pop Up Arm Cover
6-11. ST Pop Up Arm Cover
ST Pop Up Arm Cover
Ditch
Boss
6-9. ST Case U
6-12. Shoe Connector
Shoe Connector
ST Case U
ST Pop Up Arm Cover
Screw
Claw
Put away the harness internally.
Rib
Rib
Rib
Pass it through the hole.
Fkash Unit
Marking B
Pass it through the hole.
Pass it through the hole.
Pass it through the hole.
Screw
Screw
6-15. Put the Crease
6-16. SH-032 Flexible Board
Install the shoe connector flexible board.
Valley fold
Valley fold
Screw
Ditch
Black
Black
Pink
The harness must not exceed
the rib (mount side).
the rib (mount side).
Mount Side
Pink
White
White
Attention points
Black
Pink
Be in the range that the Marking A
showed in figure.
showed in figure.
There is a fold habit that the
Marking B becomes the top
in the state of Pop-up.
Marking B becomes the top
in the state of Pop-up.
∗ A < 90°
Marking A
∗ A < 90°
Click on the first or last page to see other DSLR-A230 / DSLR-A330 / DSLR-A380 service manuals if exist.