DOWNLOAD Sony DSC-WX350 Service Manual ↓ Size: 6.46 MB | Pages: 42 in PDF or view online for FREE

DSC-WX350

4-12

5.  Push the Linear Cam Barrel to protrude it to the object side so that the Drive Gear Barrel can be held.
6.  Pull down the Drive Gear Barrel to the maximum.
7.  Turn the Drive Gear Barrel clockwise to the maximum.

 

Drive Gear Barrel

Object side

Linear Cam Barrel

8.  Remove the flexible board from the hole of the Fixed Barrel.
9.  Set the lens unit in the retracted state.

 

Hole of the
Fixed Barrel

Flexible Board

10. Detach the Fixed Barrel while further turning the gear counterclockwise with a flat-blade screwdriver or a similar flat tool.

 

Gear

Fixed Barrel

Core unit_1

11.  Detach the Core unit_2 from the Linear Cam Barrel and the Drive Gear Barrel.

 

Linear Cam Barrel,
Drive Gear Barrel

Core unit_2

DSC-WX350

4-13

12. Turn the Linear Cam Barrel to set it at position A, and then detach the Linear Cam Barrel from the Drive Gear Barrel.

 

Linear Cam Barrel

Drive Gear Barrel

Linear Cam Barrel

Rounded cutout

Edge of gear

A

13. Turn the rear edge of Core unit_2 counterclockwise to set it in the state shown below.
14. Release the three claws beside the bosses with tweezers or the like to detach the 1st Cam Barrel Assy,1st Group Assy.

Note: When releasing the claws, push out the 1st Cam Barrel Assy with tweezers and lift the claws.

 

1

2

1

2

Bosses

Claws

Claw

Core unit_3

Hook

Hooks

Claw

Hook

Rear edge of
Core unit_2

1st Cam Barrel Assy,
1st Group Assy

Boss

Push out the 1st Cam
Barrel Assy.

Tweezers

Lift the claw.

Tweezers

15. Turn the 1st Group Assy clockwise to detach it.

 

1st Cam Barrel Assy

1st Group Assy

1st Group Assy

DSC-WX350

4-14

16. Fully turn the 2nd Cam Barrel clockwise to the retracted state and detach the 2nd Group Assy.

 

2nd Cam Barrel

Core unit_3

2nd Group Assy

17. Turn the rear edge of Core unit_3 counterclockwise to detach the 3rd Group Assy.

 

2nd Cam Barrel,
Linear Barrel

3rd Group Assy

Rear edge of Core unit_3

18. Turn the 2nd Cam Barrel counterclockwise to detach it.

 

2nd Cam Barrel

2nd Cam Barrel

Linear Barrel

DSC-WX350

4-15

Installation
1.  While matching the cabinet number with the circular mark and inserting the three bosses of the Linear Barrel into the three grooves of the 

2nd Cam Barrel, install the 2nd Cam Barrel to the Linear Barrel. Fully turn the 2nd Cam Barrel clockwise.

 

Cabinet
Number

Circular mark

Bosses

Boss

Groove

Linear Barrel

2nd Cam Barrel

2nd Cam Barrel

2.  While inserting the three bosses of the 3rd Group Assy into the three grooves of the 2nd Cam Barrel, install the 3rd Group Assy to the 2nd 

Cam Barrel and the Linear Barrel and then fully turn the 3rd Group Assy clockwise.

 

Grooves

2nd Cam Barrel,
Linear Barrel

Circular mark

3rd Group Assy

Boss of wide
guide

Bosses of narrow
guide

3rd Group Assy

3.  While setting the marks of the 2nd Group Assy and the 3rd Group Assy at the position shown below and inserting the three bosses of the 

2nd Group Assy into the three grooves of the 2nd Cam Barrel, install the 2nd Group Assy to the 2nd Cam Barrel.

 

Boss

Grooves of the
2nd Cam Barrel

Groove of the
2nd Cam Barrel

2nd Group Assy

Mark

Mark of the 3rd Group Assy

Bosses

Boss

2nd Group Assy