Sony DSC-WX30 (serv.man2) Service Manual ▷ View online
DSC-WX30_L2
3-1E
3. ASSEMBLY
Assembly-1: The Method of attachment of ST-264 Flexible
Board.
Bosses
Holes
1
Fold dotted line parts of the ST-264 flexible board
as shown in figure.
as shown in figure.
2
Install the ST-264 Flexible Board as shown in figure.
And fold the ST-264 flexible board as shown in figure.
And fold the ST-264 flexible board as shown in figure.
Claw
Front side view
Adhesive Part
Holes
Holes
Holes
Bosses project upward
from holes.
from holes.
3
Install the ST-264 Flexible Board as shown in figure.
Boss
Hole
Hole
Boss project upward
from hole.
from hole.
Hole
Assembly-2: The Method of attachment of Flexible Board of
the Lens Unit.
Hole
Boss
1
Fold dotted line parts of the flexible board of the Lens
Unit as shown in figure.
Unit as shown in figure.
Assembly-3: Precaution During Speaker Installation.
Speaker
Harness
Harness
Rib
Route the speaker harness as shown below.
Assembly-4: Attaching Method of LCD and TP Block Assy.
Attach the LCD Cushion (760) to LCD.
Attach the LCD to the TP Block Assy.
Remove the released paper of the LCD Cusion (760).
Assembly-x : Attaching Method of LCD and
TP Block Assy.
Peel off the LCD cushion (760) from pasted board.
LCD Cushion (760)
LCD Cushion (760)
Released Paper of
the LCD Cushion (760)
the LCD Cushion (760)
LCD
TP Block Assy
Align shape of LCD.
Do not place the TP flexible board between
the LCD and the TP block assy.
the LCD and the TP block assy.
DSC-WX30_L2
3-1E
3. ASSEMBLY
Assembly-1: The Method of attachment of ST-264 Flexible
Board.
Bosses
Holes
1
Fold dotted line parts of the ST-264 flexible board
as shown in figure.
as shown in figure.
2
Install the ST-264 Flexible Board as shown in figure.
And fold the ST-264 flexible board as shown in figure.
And fold the ST-264 flexible board as shown in figure.
Claw
Front side view
Adhesive Part
Holes
Holes
Holes
Bosses project upward
from holes.
from holes.
3
Install the ST-264 Flexible Board as shown in figure.
Boss
Hole
Hole
Boss project upward
from hole.
from hole.
Hole
Assembly-2: The Method of attachment of Flexible Board of
the Lens Unit.
Hole
Boss
1
Fold dotted line parts of the flexible board of the Lens
Unit as shown in figure.
Unit as shown in figure.
Assembly-3: Precaution During Speaker Installation.
Speaker
Harness
Harness
Rib
Route the speaker harness as shown below.
Assembly-4: Attaching Method of LCD and TP Block Assy.
Attach the LCD Cushion (760) to LCD.
Attach the LCD to the TP Block Assy.
Remove the released paper of the LCD Cusion (760).
Assembly-x : Attaching Method of LCD and
TP Block Assy.
Peel off the LCD cushion (760) from pasted board.
LCD Cushion (760)
LCD Cushion (760)
Released Paper of
the LCD Cushion (760)
the LCD Cushion (760)
LCD
TP Block Assy
Align shape of LCD.
Do not place the TP flexible board between
the LCD and the TP block assy.
the LCD and the TP block assy.
DSC-WX30_L2
3-1E
3. ASSEMBLY
Assembly-1: The Method of attachment of ST-264 Flexible
Board.
Bosses
Holes
1
Fold dotted line parts of the ST-264 flexible board
as shown in figure.
as shown in figure.
2
Install the ST-264 Flexible Board as shown in figure.
And fold the ST-264 flexible board as shown in figure.
And fold the ST-264 flexible board as shown in figure.
Claw
Front side view
Adhesive Part
Holes
Holes
Holes
Bosses project upward
from holes.
from holes.
3
Install the ST-264 Flexible Board as shown in figure.
Boss
Hole
Hole
Boss project upward
from hole.
from hole.
Hole
Assembly-2: The Method of attachment of Flexible Board of
the Lens Unit.
Hole
Boss
1
Fold dotted line parts of the flexible board of the Lens
Unit as shown in figure.
Unit as shown in figure.
Assembly-3: Precaution During Speaker Installation.
Speaker
Harness
Harness
Rib
Route the speaker harness as shown below.
Assembly-4: Attaching Method of LCD and TP Block Assy.
Attach the LCD Cushion (760) to LCD.
Attach the LCD to the TP Block Assy.
Remove the released paper of the LCD Cusion (760).
Assembly-x : Attaching Method of LCD and
TP Block Assy.
Peel off the LCD cushion (760) from pasted board.
LCD Cushion (760)
LCD Cushion (760)
Released Paper of
the LCD Cushion (760)
the LCD Cushion (760)
LCD
TP Block Assy
Align shape of LCD.
Do not place the TP flexible board between
the LCD and the TP block assy.
the LCD and the TP block assy.
DSC-WX30_L2
3-1E
3. ASSEMBLY
Assembly-1: The Method of attachment of ST-264 Flexible
Board.
Bosses
Holes
1
Fold dotted line parts of the ST-264 flexible board
as shown in figure.
as shown in figure.
2
Install the ST-264 Flexible Board as shown in figure.
And fold the ST-264 flexible board as shown in figure.
And fold the ST-264 flexible board as shown in figure.
Claw
Front side view
Adhesive Part
Holes
Holes
Holes
Bosses project upward
from holes.
from holes.
3
Install the ST-264 Flexible Board as shown in figure.
Boss
Hole
Hole
Boss project upward
from hole.
from hole.
Hole
Assembly-2: The Method of attachment of Flexible Board of
the Lens Unit.
Hole
Boss
1
Fold dotted line parts of the flexible board of the Lens
Unit as shown in figure.
Unit as shown in figure.
Assembly-3: Precaution During Speaker Installation.
Speaker
Harness
Harness
Rib
Route the speaker harness as shown below.
Assembly-4: Attaching Method of LCD and TP Block Assy.
Attach the LCD Cushion (760) to LCD.
Attach the LCD to the TP Block Assy.
Remove the released paper of the LCD Cusion (760).
Assembly-x : Attaching Method of LCD and
TP Block Assy.
Peel off the LCD cushion (760) from pasted board.
LCD Cushion (760)
LCD Cushion (760)
Released Paper of
the LCD Cushion (760)
the LCD Cushion (760)
LCD
TP Block Assy
Align shape of LCD.
Do not place the TP flexible board between
the LCD and the TP block assy.
the LCD and the TP block assy.