Sony DSC-WX220 Service Manual ▷ View online
DSC-WX220
4-4
4-3-2. Front/Top Section
• Disassembly order
No.
Part
Item
Note
1
Side Cabinet (L)
Claw x2
2
Side Cabinet (G)
Claw x1
3
Front Block Assy,
Terminal Cover Assy
Terminal Cover Assy
#212/#244 x1
Claw x2
Claw x2
Refer to Note 1.
4
Cabinet (Upper) Assy
Claw x3
5
Discharging of the Charging Capacitor
6
Main Frame
Claw x6
Refer to “4-3-4. (8) Note on Installing the Sheet (SY (830))” when installing.
7
ST-1022 Flexible Board
Tape x2
Claw x2
Boss x2
Claw x2
Boss x2
Refer to “4-3-4. (3) Note on Installing the ST-1022 Flexible Board” when
installing.
installing.
Main Section
(See page 4-5)
1
3
2
5
6
7
4
#212/#244 (3)
(Note 1)
(Claws)
(Claw)
(Claw)
(Claw)
(Claws)
(Claws)
(Tape)
(Tape)
(Claw)
(Claws)
(Bosses)
Terminal Cover Assy
(Claws)
(Claw)
Note: 高電圧の警告
ストロボ用充電コンデンサの端子間にショート治具
を接続し,約10秒間,放電を行ってください。
ショート治具についてはサービスノートを参照して
ください。
ストロボ用充電コンデンサの端子間にショート治具
を接続し,約10秒間,放電を行ってください。
ショート治具についてはサービスノートを参照して
ください。
Note: Warning of high voltage
Short-circuit the terminals of the flash capacitor
with a Short Jig for approximately 10 seconds.
Refer to the Service Note for a Short Jig.
Short-circuit the terminals of the flash capacitor
with a Short Jig for approximately 10 seconds.
Refer to the Service Note for a Short Jig.
Short Jig
ショート治具
ショート治具
ST-1022 Flexible Board
The charging capacitor for the flash
ストロボ用充電コンデンサ
ストロボ用充電コンデンサ
Screw's
Ref. No. (Parts Color.)
Ref. No. (Parts Color.)
Cabinet's Color
Table 2-1
#212 (Silver)
#244 (Black)
GOLD/PINK
BLACK
The screw pointed is different according to the cabinet's color.
For the combination of cabinet's color and screw, please refer to Table 2-1.
Note 1 : THE COMBINATION OF CABINET’S COLOR AND SCREW
1.4
3.0
#212: M1.4 X 3.0
(Silver)
4-270-114-01
4-270-114-01
#244: M1.4 X 3.0
(Black)
4-412-769-21
4-412-769-21
3.0
1.4
DSC-WX220
4-5
4-3-3. Main Section
• Disassembly order
No.
Part
Item
Note
1
Lens Block
Connector x2
Refer to “4-3-4. (4) Note on Installing the Lens Block” when installing.
2
Sheet Lens Flexible
Seal
Refer to “4-3-4. (5) Note on Installing the Sheet Lens Flexible” when
installing.
installing.
3
Radiation Sheet (LE)
Seal
Refer to “4-3-4. (6) Note on Installing the Radiation Sheet (LE)” when
installing.
installing.
4
FPC Tape
Seal
Refer to “4-3-4. (9) Note on Installing the FPC Tape” when installing.
5
SP Plate
Claw x2
6
Loudspeaker (1.0 cm)
Solder x2
Refer to “4-3-4. (2) Note on Installing the Speaker” when installing.
7
SY-1037 board
#237 x1
Claw x1
Connector x1
Claw x1
Connector x1
Do not touch the metal part for Antenna.
8
Radiant Sheet (SY)
Seal
Refer to “4-3-4. (7) Note on Installing the Radiant Sheet (SY)” when
installing.
installing.
(Metal Part for Antenna)
(Claw)
(Claw)
Lens Block
(See page 4-9)
SY
-1037
1
2
3
5
4
7
8
6
(Solders)
(Claw)
#237 (7)
#237: M1.4 X 2.0
(Silver)
4-270-114-21
4-270-114-21
2.0
1.4
DSC-WX220
4-6
4-3-4. Complementary Information
(1) Installation Method of Antenna
Rib
Antenna
Antenna
1
Insert the rib on the left of the antenna into the main
frame hole.
2
Install the antenna in the direction of arrow.
* Check that the metal piece of the antenna is in contact
with the metal part on the SY-1037 board.
with the metal part on the SY-1037 board.
Claw
Claw
Main frame hole
Metal part on
the SY-1037 board
the SY-1037 board
(2) Note on Installing the Speaker
Route the speaker harness as shown below.
Speaker
Harness
Harness
Rib
(3) Note on Installing the ST-1022 Flexible Board
Install the ST-1022 flexible board.
ST-1022 F
lexible
Board
Bosses
DSC-WX220
4-7
(4) Note on Installing the Lens Block
Hook the flexible board to the boss.
Flexible board
Boss
(5) Note on Installing the Sheet Lens Flexible
Sheet Lens Flexible
Guide Line
(6) Note on Installing the Radiation Sheet (LE)
Radiation Sheet (LE)
Do not run aground.
Do not run aground.
Guide Line
(7) Note on Installing the Radiant Sheet (SY)
Radiant Sheet (SY)
SY-1037 Board
SY-1037 Board
Guide Line
Guide Line
Click on the first or last page to see other DSC-WX220 service manuals if exist.