Sony DSC-W290 (serv.man2) Service Manual ▷ View online
2-4
DSC-W290_L2
EXPLODED VIEW
HARDWARE LIST
2-2-2. FRONT SECTION
Follow the disassembly in the numerical order given.
1
Cabinet (Front)
(
1
-1 to
1
-6)
2
Lens Block
(
2
-1 to
2
-6)
2
-1
(#159)
2
-2
2
-4
2
-5
2
-6E
2
-3
1
-1
(#159)
1
-6E
(#159)
Battery Holder Section
(See Page 2-5)
2
Lens Block
1
Cabinet (Front)
1
-2
1
-3
HELP04
HELP05
1
-4
1
-5
2-5
DSC-W290_L2
2-2-3. BATTERY HOLDER SECTION
Follow the disassembly in the numerical order given.
1
Cabinet (Upper) Section
(
1
-1 to
1
-4)
2
SY-216 Board
(
2
-1 to
2
-5)
EXPLODED VIEW
HARDWARE LIST
SY
-216
2
-2
(Claw)
2
-3
(Lib, Claw)
2
-4
(Solders)
2
-5E
1
-2
(#159)
1
-3
(Claws)
2
SY-216 Board
1
Cabinet (Upper) Section
1
-1
1
-4E
HELP08
HELP10
HELP09
HELP07
HELP06
2
-1
Note: Do not forget to apply Tape (N4)
to SY-216 board.
to SY-216 board.
2-6
DSC-W290_L2
2-3. PRECAUTIONS WHEN HOLDING THE LENS BLOCK
•
Hold the Lens Block at the center of both sides.
•
Do not hold the following part.
Hold here.
Lens Flexible Board
Lens Flexible Board
Optical Stepping Motor
∗
Very weak
Zoom Motor
Lens Barrel
Lens Barrier
∗
Very weak
Focus Lens
2-7
DSC-W290_L2
2-4. BARRIER ASSY REPLACING METHOD
5
Utilizing a concave portion of the Barrier Assy, insert the edge of nippers into the side surface to make a cut in and wind it up
to peel about 2/3 (about 10mm; approximately second convex).
Note:
Mask the second lens barrel to prevent damage.
6
Wind a rubber around the remaining part of the Ornamental Ring (A) and apply torque to peel the part that remains inside and
at the hem.
7
Disengage three claws, and remove the Barrier Assy.
Concave
Second lens barrel
Rubber
Ornamental Ring (A)
Convex
10mm
A
B
Barrier Assy
Removal
1
Turn on the power switch and extend the lens up to the TELE end.
2
Detach the battery.
3
Insert the edge of nippers from the inner diameter into A or B of the Ornamental Ring (A) to make a cut in till the outside.
4
Pinch either of the parted surfaces and wind it up to peel the flat surface on the objective side.
Note:
Applying a load to the lens barrel could affect the lens zoom-in operation. Do not apply a load to the lens barrel.
Claws
Click on the first or last page to see other DSC-W290 (serv.man2) service manuals if exist.