Sony DSC-W230 (serv.man4) Service Manual ▷ View online
DSC-W230_L2
Sony EMCS Co.
2009G0800-1
©2009.07
Published by Tokai TEC
SUPPLEMENT-1
File this supplement with the service manual previously issued.
(09-133)
SERVICE MANUAL
Ver. 1.1 2009. 07
9-852-657-81
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Korea Model
Argentine Model
LEVEL
2
• SY-230 Board Without IC402
Has Been Added for Service
• Change of ST-207 Board
Schematic Diagram
• Revision of Supplied Accessories
DSC-W230
Note: Please refer to the Ver. 1.1 of SERVICE MANUAL (9-852-657-32) for the revision of accessories.
— 2 —
DSC-W230_L2
29
15
21
22
28
1
7
8
14
IC402
SY-230 BOARD (SIDE A)
There are two types
of the SY-230 board.
One is that the IC402
of the SY-230 board.
One is that the IC402
is
mounted (A-1701-717-A),
the other is that the IC402 is
not mounted (A-1701-717-B).
Therefore, each adjusting
procedure is different.
For details, start the
Adjust manual in the
Adjust station and
execute “Angular velocity
sensor sensitivity adj.”.
the other is that the IC402 is
not mounted (A-1701-717-B).
Therefore, each adjusting
procedure is different.
For details, start the
Adjust manual in the
Adjust station and
execute “Angular velocity
sensor sensitivity adj.”.
Page
Before change
1-1
• SY-230 BOARD WITHOUT IC402 HAS BEEN ADDED FOR SERVICE
Angular Velocity Sensor
When you replace to the reparing board, write down the sensitivity displayed on the angular velocity sensor (SE401 and SE402).
Start the Adjust Manual in the Adjust Station and execute the “Angular velocity sensor sensitivity adj”.
Start the Adjust Manual in the Adjust Station and execute the “Angular velocity sensor sensitivity adj”.
1.
SERVICE NOTE
1-1. PRECAUTION ON REPLACING THE SY-230 BOARD
PP
YY
PP: PITCH Sensor
sensitivity
YY: YAW Sensor
sensitivity
SE401
SE402
SY-230 BOARD (SIDE B)
1
1
2
4
3
2
4
3
Note:
The sensor sensitivity of SE401 and SE402 of SY-230 board is written only on the repair parts.
After change
Angular Velocity Sensor
When you replace to the reparing board, write down the sensitivity displayed on the angular velocity sensor (SE401 and SE402).
Start the Adjust Manual in the Adjust Station and execute the “Angular velocity sensor sensitivity adj”.
Start the Adjust Manual in the Adjust Station and execute the “Angular velocity sensor sensitivity adj”.
Note:
The sensor sensitivity of SE401 and SE402 of SY-230 board is written only on the repair parts.
PP
YY
PP: PITCH Sensor
sensitivity
YY: YAW Sensor
sensitivity
SE401
SE402
SY-230 BOARD (SIDE B)
1
1
2
4
3
2
4
3
&
: Points added portion
_
— 3 —
DSC-W230_L2
Page
Before change
After change
3-1
3.
BLOCK DIAGRAMS
G5, K1
G2, C2
D8, D1
,
CUS MOTOR DRIVER,
OM MOTOR DRIVER
(7/9)
XCS_IC_401_2
B2
IC402
(7/9)
PITCH/YAW
SENSOR AMP
13
10
1
21
24, 25
(PITCH)
(7/9)
SE401
(YAW)
(7/9)
SE402
G2, C2
D8, D1
,
CUS MOTOR DRIVER,
OM MOTOR DRIVER
(7/9)
XCS_IC_401_2
B2
(PITCH)
(7/9)
SE401
(YAW)
(7/9)
SE402
3-1. OVERALL BLOCK DIAGRAM (1/2)
3-1. OVERALL BLOCK DIAGRAM (1/2)
3-4. POWER BLOCK DIAGRAM (2/2)
3-4. POWER BLOCK DIAGRAM (2/2)
3-4
PITCH/YAW
SENSOR AMP
(7/9)
IC402
(PITCH)
(7/9)
SE401
(YAW)
(7/9)
SE402
(PITCH)
(7/9)
SE401
(YAW)
(7/9)
SE402
!
: Points deleted portion
-
: Points changed portion
5.
REPAIR PARTS LIST
5-1. EXPLODED VIEWS
Ref. No.
Part No.
Description
111
A-1701-717-A SY-230 BOARD, COMPLETE (SERVICE)
Page
Before change
After change
5-4
5-1-3. BT HOLDER SECTION
5-1-3. BT HOLDER SECTION
Ref. No.
Part No.
Description
111
A-1701-717-B SY-230 BOARD, COMPLETE (SERVICE)
]
-
: Points changed portion
— 4 —
DSC-W230_L2
• CHANGE OF ST-207 BOARD SCHEMATIC DIAGRAM
Page
Before change
After change
4-14
ST-207 BOARD (1/2)
Location: C-6 to D-7
ST-207 BOARD (1/2)
Location: C-6 to D-7
-
: Points changed portion
4.
PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS
4-2. SCHEMATIC DIAGRAMS
0
4
7
8
3
R004
1M
R005
100
39
0
4
7
8
3
R004
1M
R005
5.
REPAIR PARTS LIST
5-2. ELECTRICAL PARTS LIST
Ref. No.
Part No.
Description
R005
1-218-941-11 METAL CHIP
100
5%
1/16W
Page
Before change
After change
5-7
ST-207 BOARD
ST-207 BOARD
Ref. No.
Part No.
Description
R005
1-220-884-81 METAL CHIP
39
0.5%
1/16W
]
-
: Points changed portion
Display
