Sony DSC-U50 (serv.man2) Service Manual ▷ View online
2-3
DSC-U50
Note:
Follow the disassembly procedure in the numerical order given.
2-1. BT LID ASSY (80)
4
Three screws (lock ace)
5
2
Slide the BT lid.
1
Push the button.
3
6
BT lid assy (80)
7
USB cover (80)
2-4
DSC-U50
2-2. MAIN CABINET ASSY
tape
2
Two screws
(lock ace)
(lock ace)
1
Make JIG as shown in a figure.
38mm
16mm+
1mm
1mm
4
Two screws
(lock ace)
(lock ace)
Jig
3
Rotate the lens cabinet section.
5
Put the lens cabinet section
back in its place.
back in its place.
Main cabinet assy
Jig
6
Put the tip of Jig into the position of a figure.
7
Push the battery holder and LCD section
until a 1mm crevice opens.
until a 1mm crevice opens.
8
Apply power in the direction of
arrow
arrow
A
by JIG, and remove boss.
Apply power in the direction of
arrow
arrow
A
by JIG, and remove boss.
9
Slide the main cabinet assy.
Slide the main cabinet assy.
0
Push the LCD holder
for removing the boss.
for removing the boss.
Push the LCD holder for removing the boss.
LCD window
Boss
Boss
A
A
qs
Flexible board (CN916)
qa
Main cabinet assy
Note: Remove it while
taking care as
the flexible board
is connected.
the flexible board
is connected.
2-5
DSC-U50
2-3. LENS CABINET SECTION
1
Label (80)
Label (80)
TY-018 board
4
Connector
(CN908)
(CN908)
3
Flexible cable
(CN907)
(CN907)
2
Tapping P2 screw
Sheet attachment position
Processing the flexible board
DD-206 board
Hinge block
BU-002 board
5
Connector (CN904)
8
It is made to pass through
a connector.
a connector.
7
Flexible cable (CN918)
6
Connector (CN903)
9
Lens cabinet section
2-6
DSC-U50
2-5. PIEZOELECTRIC BUZZER
2
Piezoelectric buzzer
1
Connector (CN909)
2-4. US-009 BOARD
1
P2 tapping Screw
3
US-009 board
2
Flexible board
(CN909)
(CN909)
US-009 board
TY-018 board
Processing the flexible board
Sheet attachment position
US-009 board
Reset button sheet (80)
Click on the first or last page to see other DSC-U50 (serv.man2) service manuals if exist.