Sony DSC-U10 (serv.man3) Service Manual ▷ View online
29
Shoo
ting
s
s
till
ima
g
e
s
Using the self-timer
,
Set the mode switch to STILL, and press
MENU.
MENU.
The menu appears on the LCD screen.
•
You can also carry out this operation when the mode switch
is set to MOVIE.
is set to MOVIE.
LCD screen display during shooting
You can use [DISPLAY] under [
] with MENU
and v/V on the control button to turn the display
on and off. This is useful when recording under
conditions where it is difficult to check the image
on the LCD screen.
on and off. This is useful when recording under
conditions where it is difficult to check the image
on the LCD screen.
•
For detailed descriptions of the indicators, see page 96.
•
Indicators on the LCD screen are not recorded.
(Displays warnings
only)
only)
(Displays all indicators
that can be displayed)
that can be displayed)
When [DISPLAY] is
[OFF]
[OFF]
When [DISPLAY] is
[ON]
[ON]
23
1280
1280
1280
1
STILL
RETURN
FOCUS
SELFTIMER
P.EFFECT
SELFTIMER
P.EFFECT
AUTO
OFF
OFF
OFF
SIZE BURST
•
1280
1280
1280
MENU
30
,
Select [
] with
v
/
V
on the control
button, then press EXEC.
Select [SELFTIMER] with
Select [SELFTIMER] with
v
/
V
on the
control button, then press EXEC.
,
Select [ON] with
v
/
V
on the control
button, then press EXEC.
When you press MENU, the menu disappears.
The
The
(self-timer) indicator appears on the LCD
screen.
2
SIZE BURST
•
RETURN
FOCUS
SELFTIMER
P.EFFECT
SELFTIMER
P.EFFECT
AUTO
OFF
OFF
OFF
1280
1280
1280
EXEC
3
SELFTIMER
O N
O F F
1280
1280
1280
23
EXEC
31
Shoo
ting
s
s
till
ima
g
e
s
,
Center the subject in the LCD screen,
and press and hold the shutter button
halfway down.
and press and hold the shutter button
halfway down.
,
Press the shutter button fully down.
The self-timer lamp (page 10) flashes in red and the
beep sounds. The image will be shot after
approximately 10 seconds.
beep sounds. The image will be shot after
approximately 10 seconds.
To cancel the self-timer in the middle of the
operation
operation
Close the lens cover and turn off the power.
•
If you press the shutter button while standing in front of the
camera, the focus and the exposure may not be correctly set.
camera, the focus and the exposure may not be correctly set.
4
1280
1280
1280
23
5
23
1280
1280
1280
Self-timer lamp
32
Selecting a flash mode
,
Set the mode switch to STILL, and press
v
( ) on the control button repeatedly to
select a flash mode.
Each time you press v ( ), the indicator changes as
follows:
follows:
No indicator (Auto):
Based on the lighting
conditions, the camera will decide if there is enough
light, and will use the flash accordingly (factory setting).
light, and will use the flash accordingly (factory setting).
r
(Red-eye reduction):
Flash mode is set to Auto,
and the red-eye reduction operates if the flash strobes.
r
(Forced flash):
The flash strobes regardless of the
surrounding brightness.
r
(No flash):
The flash does not strobe.
1280
1280
1280
23
Click on the first or last page to see other DSC-U10 (serv.man3) service manuals if exist.